{"product_id":"garmin-compact-reactor-40-hydraulic-autopilot-with-ghc-50-and-shadow-drive-technology","title":"Garmin Compact Reactor 40 hydraulic autopilot with GHC 50 and Shadow Drive technology","description":"\u003cp\u003eDesigned for boats less than 7.6 m (25') long, the basic hydraulic autopilot Compact Reactor 40 gives you a hand so you can explore paradise without worries.\u003c\/p\u003e\n\u003cp\u003eCompatibility with corepack\u003c\/p\u003e\n\u003cp\u003eThis corepack is a perfect autopilot solution for single-engine outboard boats less than 7.6 m (25') long1. It is not necessary to manually hold the rudder to maintain the course, especially when sailing at moderate or high speeds2.\u003c\/p\u003e\n\u003cp\u003eAhrs of 9-AXIS solid state\u003c\/p\u003e\n\u003cp\u003eThe advanced 9-axis solid-state AHRS system allows you to install the Reactor 40 unit in virtually anywhere and orientation. It even reduces energy consumption, minimizes course errors and much more.\u003c\/p\u003e\n\u003cp\u003eAbility to react to water conditions\u003c\/p\u003e\n\u003cp\u003eKeep the course at sea: this autopilot reacts to the conditions, so you can maintain peace of mind even when nooing or rocking movements occur.\u003c\/p\u003e\n\u003cp\u003eSimple calibration and installation\u003c\/p\u003e\n\u003cp\u003eAll automatic pilots require a commissioning and calibration process. Reactor 40 makes it quick and easy. This autopilot is easy to install with flexible mounting options.\u003c\/p\u003e\n\u003cp\u003eWireless remote functions\u003c\/p\u003e\n\u003cp\u003eControl the autopilot from anywhere on the boat using your compatible Garmin devices, including the Reactor autopilot remote control, certain quatix® nautical watches and many more (requires a compatible Garmin plotter or a GHC 50 autopilot instrument).\u003c\/p\u003e\n\u003cp\u003eShadow drive™ technology\u003c\/p\u003e\n\u003cp\u003eManeuver the boat with greater freedom. This corepack allows the optional Shadow Drive technology to automatically disable the autopilot when turning the rudder.\u003c\/p\u003e\n\u003cp\u003eGhc 50 optional pack\u003c\/p\u003e\n\u003cp\u003eCombine the Reactor 40 autopilot with the GHC 50 autopilot instrument to add a specific autopilot touch screen to the control bridge. In addition, GHC 50 allows you to share data and settings with Garmin multifunction displays and other Garmin devices installed.\u003c\/p\u003e\n\u003cp\u003eFunctions for sailing and motor boats\u003c\/p\u003e\n\u003cp\u003eWhen connected to a compatible Garmin plotter, all Reactor 40 corepacks offer functions for sailing and motor boats, such as heading and wind control, step turns and turning\/transfer maneuvers when paired with a wind sensor (sold separately). You can even enjoy other advantages, such as the route tracking and Auto Guidance+™3 functions.\u003c\/p\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=e414356ecd00da8688ec0c619a8fa4f782cebe091ff5d895cc5b503340ee6ff2 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eHow can the Shadow Drive sensor be mounted for dual-helm systems?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIn a dual-helm installation, install the Shadow Drive sensor between the pump and the hydraulic T-connector that leads to the helms, closer to the T-connector than the pump.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre pump hydraulic port types specified?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, all three hydraulic ports on the pump are 1\/4 in. NPT. Use appropriate T-connectors and shut-off valves for installation.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat safety equipment is needed during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAlways wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding during the installation.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should be done before drilling or cutting during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAlways check the opposite surface before drilling or cutting to avoid damaging the vessel.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhere should the alarm be installed on the boat?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMount the alarm near the primary helm station or under the dashboard; wires can be extended with 28 AWG (0.08 mm²) wire.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre mounting screws included with the ECU?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMounting screws are included with the ECU, but if they are unsuitable for your mounting surface, you must provide appropriate screws.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do I connect the system to the NMEA 2000 network?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eBoth the helm control (or compatible Garmin chartplotter) and the CCU must connect to the NMEA 2000 network using T-connectors.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWho should install the Compact Reactor 40 autopilot system?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe autopilot system should be installed by a qualified marine installer with knowledge of marine steering and electrical systems.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow to check a CCU mounting site for magnetic interference?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eUse a handheld compass to check for compass needle movement over three degrees at the site to ensure low magnetic interference.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat type of thread sealant should be used for hydraulic connections?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAn appropriate thread sealant should be used on all pipe threads in the hydraulic system.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould I record component serial numbers?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, you should record the serial number of each component for registration and warranty purposes.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"How can the Shadow Drive sensor be mounted for dual-helm systems?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"In a dual-helm installation, install the Shadow Drive sensor between the pump and the hydraulic T-connector that leads to the helms, closer to the T-connector than the pump.\"}}, {\"@type\": \"Question\", \"name\": \"Are pump hydraulic port types specified?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, all three hydraulic ports on the pump are 1\/4 in. NPT. Use appropriate T-connectors and shut-off valves for installation.\"}}, {\"@type\": \"Question\", \"name\": \"What safety equipment is needed during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding during the installation.\"}}, {\"@type\": \"Question\", \"name\": \"What should be done before drilling or cutting during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Always check the opposite surface before drilling or cutting to avoid damaging the vessel.\"}}, {\"@type\": \"Question\", \"name\": \"Where should the alarm be installed on the boat?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Mount the alarm near the primary helm station or under the dashboard; wires can be extended with 28 AWG (0.08 mm²) wire.\"}}, {\"@type\": \"Question\", \"name\": \"Are mounting screws included with the ECU?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Mounting screws are included with the ECU, but if they are unsuitable for your mounting surface, you must provide appropriate screws.\"}}, {\"@type\": \"Question\", \"name\": \"How do I connect the system to the NMEA 2000 network?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Both the helm control (or compatible Garmin chartplotter) and the CCU must connect to the NMEA 2000 network using T-connectors.\"}}, {\"@type\": \"Question\", \"name\": \"Who should install the Compact Reactor 40 autopilot system?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The autopilot system should be installed by a qualified marine installer with knowledge of marine steering and electrical systems.\"}}, {\"@type\": \"Question\", \"name\": \"How to check a CCU mounting site for magnetic interference?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Use a handheld compass to check for compass needle movement over three degrees at the site to ensure low magnetic interference.\"}}, {\"@type\": \"Question\", \"name\": \"What type of thread sealant should be used for hydraulic connections?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"An appropriate thread sealant should be used on all pipe threads in the hydraulic system.\"}}, {\"@type\": \"Question\", \"name\": \"Should I record component serial numbers?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, you should record the serial number of each component for registration and warranty purposes.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626154361169,"sku":"010-02794-08","price":2561.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-compact-reactor-40-hydraulic-autopilot-with-ghc-50-and-shadow-drive-technology-compact-reactortm-40-hydraulic-autopilot-with-ghctm-50-and-shadow-drivetm-technology.webp?v=1754729844","url":"https:\/\/www.sailrace.com\/el\/products\/garmin-compact-reactor-40-hydraulic-autopilot-with-ghc-50-and-shadow-drive-technology","provider":"SailRACE","version":"1.0","type":"link"}