{"title":"GARMIN CHIRP TRADITIONAL THRU-HULL TRANSDUCERS","description":"","products":[{"product_id":"garmin-gt12-m-thf","title":"Garmin GT12 m-THF","description":"\u003cp\u003eThis CHIRP transducer with a median frequency band of 350 watts and built-in mounting has been designed to reduce resistance and optimize the performance of the probe in medium-sized fishing or navigation boats, and clearly defines the fish arches, structures and depth returns of the bottom on the screen.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimal Pulse Sensitivity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe robust transducer offers excellent probe sensitivity, low noise, high resolution and good lens separation, which makes distinguishing the fish and structures on the screen of your compatible plotter easier than ever.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation of Helmets\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe durable bronze housing and wheel allow a simple built-in mounting of the helmets with which a minimum resistance and an optimal orientation of the beam are achieved to obtain clear probe data.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAutomatic Identification Technology\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEnjoy simple plug-and-play operation with Garmin's automatic identification technology, which allows the probe to be automatically configured depending on the transducer being used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt Adapts to Various Types of Helmets\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe transducer can be configured for a wide variety of hull materials, such as fiberglass, laminated materials and wood, and can be mounted with several inclinations to allow pantoque angles from 0 to 24 degrees without a bar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWide Range of Frequencies\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse the perfect frequency for the areas where you fish. This transducer, which covers the average frequency range, emits pulses from 85 to 165 kHz and offers a wide coverage area, sharp fish arcs and accurate depth readings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTraditional CHIRP Probe with Medium Frequency Band\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis 350-watt, 8-pin bronze helmet transducer has a CHIRP probe with a high-definition medium frequency band that clearly defines fishing targets and structures at depths of up to 240 m in salt water and 365 m in fresh water.\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003ctable class=\"app__product__specs__container__group\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth class=\"specs-group narrow-column\"\u003ePhysical And Performance Characteristics\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"narrow-column\"\u003eFrequency\u003c\/td\u003e\n\u003ctd class=\"wide-column\"\u003eCHIRP with medium frequency band (85-165 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"narrow-column\"\u003eEnergy\u003c\/td\u003e\n\u003ctd class=\"wide-column\"\u003e350 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"narrow-column\"\u003eBeam Width\u003c\/td\u003e\n\u003ctd class=\"wide-column\"\u003e24°-16°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"narrow-column\"\u003eMaximum Depth\u003c\/td\u003e\n\u003ctd class=\"wide-column\"\u003e240 meters in salt water; 365 meters in fresh water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"narrow-column\"\u003eRapidreturn™ Sonar Compatible\u003c\/td\u003e\n\u003ctd class=\"wide-column\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"narrow-column\"\u003eCable Length\u003c\/td\u003e\n\u003ctd class=\"wide-column\"\u003e15 meters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"narrow-column\"\u003eDEPTH\/SPEED\/TEMPERATURE\u003c\/td\u003e\n\u003ctd class=\"wide-column\"\u003eDepth, temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"narrow-column\"\u003eNumber of Sideburns\u003c\/td\u003e\n\u003ctd class=\"wide-column\"\u003e8 pines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"narrow-column\"\u003eAft Mirror Angles Allowed\u003c\/td\u003e\n\u003ctd class=\"wide-column\"\u003eThe 0° inclination is compatible with hull pantoque angles from 0° to 7°\u003cbr\u003e\nThe inclination of 12° is compatible with pantoque angles of the hull from 8° to 15°\u003cbr\u003e\nThe 20° inclination is compatible with hull pantoque angles from 16° to 24°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"narrow-column\"\u003eHousing Material\u003c\/td\u003e\n\u003ctd class=\"wide-column\"\u003eBronze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=fa981c282ba3edaa4504da06bc8919b94fb6197060796df09326d92df1ddbc9c --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWhat type of marine sealant should be used for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA flexible, fast-cure marine sealant for below the waterline should be used with the GT12 m-THF transducer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the transducer cable be routed during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eRoute the cable away from other wiring and engines to avoid possible interference with the sonar signal.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the hull nut be tightened for a fiberglass hull installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTighten with a suitable wrench, but do not over-tighten to prevent hull damage.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should you choose the correct transducer inclination for your hull?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYou should match the transducer's angle to the hull's deadrise at the installation point for optimal sonar performance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat safety precautions should be taken during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eWear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding during installation.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs it permissible to cut or splice the transducer cable?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDo not cut or splice the cable except for bare-wire sonar box use, as this may void your warranty.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhere should the transducer be mounted for best performance?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMount in clean, non-turbulent water, away from strakes, struts, or anything creating bubbles or turbulence.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat precaution should be taken when cleaning the GT12 m-THF transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDo not use solvents such as mineral spirits, acetone, or MEK. Only use a soft cloth and mild detergent for cleaning.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat safety precautions should be taken when drilling or cutting the hull?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAlways check the opposite side before drilling and wear safety goggles, ear protection, and a dust mask.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow can you protect the transducer cable passing through a bulkhead?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eUse grommets to protect the cable if it passes through bulkheads.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What type of marine sealant should be used for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A flexible, fast-cure marine sealant for below the waterline should be used with the GT12 m-THF transducer.\"}}, {\"@type\": \"Question\", \"name\": \"How should the transducer cable be routed during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Route the cable away from other wiring and engines to avoid possible interference with the sonar signal.\"}}, {\"@type\": \"Question\", \"name\": \"How should the hull nut be tightened for a fiberglass hull installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Tighten with a suitable wrench, but do not over-tighten to prevent hull damage.\"}}, {\"@type\": \"Question\", \"name\": \"How should you choose the correct transducer inclination for your hull?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"You should match the transducer's angle to the hull's deadrise at the installation point for optimal sonar performance.\"}}, {\"@type\": \"Question\", \"name\": \"What safety precautions should be taken during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding during installation.\"}}, {\"@type\": \"Question\", \"name\": \"Is it permissible to cut or splice the transducer cable?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Do not cut or splice the cable except for bare-wire sonar box use, as this may void your warranty.\"}}, {\"@type\": \"Question\", \"name\": \"Where should the transducer be mounted for best performance?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Mount in clean, non-turbulent water, away from strakes, struts, or anything creating bubbles or turbulence.\"}}, {\"@type\": \"Question\", \"name\": \"What precaution should be taken when cleaning the GT12 m-THF transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Do not use solvents such as mineral spirits, acetone, or MEK. Only use a soft cloth and mild detergent for cleaning.\"}}, {\"@type\": \"Question\", \"name\": \"What safety precautions should be taken when drilling or cutting the hull?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Always check the opposite side before drilling and wear safety goggles, ear protection, and a dust mask.\"}}, {\"@type\": \"Question\", \"name\": \"How can you protect the transducer cable passing through a bulkhead?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Use grommets to protect the cable if it passes through bulkheads.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"0º","offer_id":51626177757521,"sku":"010-02867-00","price":444.99,"currency_code":"EUR","in_stock":true},{"title":"12º","offer_id":51626177790289,"sku":"010-02867-01","price":444.99,"currency_code":"EUR","in_stock":true},{"title":"20º","offer_id":51626177823057,"sku":"010-02867-02","price":444.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gt12m-thf-gt12m-thf-hr-1000.png?v=1754730404"},{"product_id":"garmin-gt15-m-thf","title":"Garmin GT15 m-THF","description":"\u003cp\u003eThis CHIRP transducer with a medium frequency band of 600 watts and built-in mounting has been designed to reduce resistance and optimize the performance of the probe in medium-sized fishing or navigation boats, and clearly defines the fish arches, structures and depth returns of the bottom on the screen.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimal Pulse Sensitivity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe robust transducer offers excellent probe sensitivity, low noise, high resolution and good lens separation, which makes distinguishing the fish and structures on the screen of your compatible plotter easier than ever.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation of Helmets\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe durable stainless steel housing and wheel allow a simple built-in mounting of helmets with which minimal resistance and optimal beam orientation are achieved to obtain clear probe data.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAutomatic Identification Technology\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEnjoy simple plug-and-play operation with Garmin's automatic identification technology, which allows the probe to be automatically configured depending on the transducer being used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt Adapts to Various Types of Helmets\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe transducer can be configured for a wide variety of hull materials, such as fiberglass, laminated materials, steel, aluminum and wood, and can be mounted with various inclinations to allow pantoque angles from 0 to 24 degrees without a bar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWide Range of Frequencies\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse the perfect frequency for the areas where you fish. This transducer, which covers the average frequency range, emits pulses from 85 to 165 kHz and offers a wide coverage area, sharp fish arcs and accurate depth readings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTraditional CHIRP Probe with Medium Frequency Band\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis 600-watt, 8-pin stainless steel helmet transducer has a CHIRP probe with a high-definition medium frequency band that clearly defines fishing targets and structures at depths of up to 365 m in salt water and 580 m in fresh water.\u003c\/p\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=2f7791bfea2f12ffd4c819ebe70ae5102224c9185f9f9c7b8beb1c7ed303d57f --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eHow to confirm proper sealing during hull installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eApply a 2 mm layer of marine sealant to the inner flange and along the threads of the transducer housing where it contacts the hull.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do you prepare a solid fiberglass hull for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDrill a 3 mm pilot hole, use a 73 mm hole saw for the main hole, then sand and clean inside\/around the hole before installing the transducer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the proper orientation when installing the transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe arrow on top of the transducer must point to the keel so the internal angle aligns with the deadrise angle of the boat.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do you route and secure the transducer cable?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eRoute the cable away from other wiring and engines, use grommets to protect it when passing through bulkheads, and secure it gently with zip ties.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould the transducer ever be operated out of water?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAlways operate the transducer submerged. Operating it in air may cause overheating and damage.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould the cable be used to lift or pull the transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eNo, do not use the cable to pick up or pull the transducer. This can damage the cable and transducer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should you clean the transducer to avoid damage?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eClean the transducer with a soft cloth and mild detergent, or a non-metallic pad for severe fouling. Do not use solvents like acetone or a power washer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould antifouling paint be used, and what kind?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYou can use water-based anti-fouling paint on the hull to slow organism growth. Do not use ketone-based paints.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there operating temperature limits for this transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, the operating range is 0° to 50°C (32° to 122°F). For storage, -40° to 70°C (-40° to 158°F).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"How to confirm proper sealing during hull installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Apply a 2 mm layer of marine sealant to the inner flange and along the threads of the transducer housing where it contacts the hull.\"}}, {\"@type\": \"Question\", \"name\": \"How do you prepare a solid fiberglass hull for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Drill a 3 mm pilot hole, use a 73 mm hole saw for the main hole, then sand and clean inside\/around the hole before installing the transducer.\"}}, {\"@type\": \"Question\", \"name\": \"What is the proper orientation when installing the transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The arrow on top of the transducer must point to the keel so the internal angle aligns with the deadrise angle of the boat.\"}}, {\"@type\": \"Question\", \"name\": \"How do you route and secure the transducer cable?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Route the cable away from other wiring and engines, use grommets to protect it when passing through bulkheads, and secure it gently with zip ties.\"}}, {\"@type\": \"Question\", \"name\": \"Should the transducer ever be operated out of water?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Always operate the transducer submerged. Operating it in air may cause overheating and damage.\"}}, {\"@type\": \"Question\", \"name\": \"Should the cable be used to lift or pull the transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, do not use the cable to pick up or pull the transducer. This can damage the cable and transducer.\"}}, {\"@type\": \"Question\", \"name\": \"How should you clean the transducer to avoid damage?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Clean the transducer with a soft cloth and mild detergent, or a non-metallic pad for severe fouling. Do not use solvents like acetone or a power washer.\"}}, {\"@type\": \"Question\", \"name\": \"Should antifouling paint be used, and what kind?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"You can use water-based anti-fouling paint on the hull to slow organism growth. Do not use ketone-based paints.\"}}, {\"@type\": \"Question\", \"name\": \"Are there operating temperature limits for this transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, the operating range is 0° to 50°C (32° to 122°F). For storage, -40° to 70°C (-40° to 158°F).\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"0º","offer_id":51626177888593,"sku":"010-02868-00","price":845.49,"currency_code":"EUR","in_stock":true},{"title":"12º","offer_id":51626177921361,"sku":"010-02868-01","price":845.49,"currency_code":"EUR","in_stock":true},{"title":"20º","offer_id":51626177954129,"sku":"010-02868-02","price":845.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gt15m-thf-gt15m-thf-hr-1002.png?v=1754730413"},{"product_id":"garmin-gt17-m-thf-0-degrees","title":"Garmin GT17 m-THF 0 Degrees","description":"\u003cp\u003eDesigned for reduced drag and optimum sonar performance on fishing and cruising boats, this flush-mounted 1 kW midband CHIRP (80–165 kHz) transducer clearly defines fish arches, structure and bottom depth returns on your display.\u003c\/p\u003e\n\u003cp\u003eMidband CHIRP traditional sonar\u003c\/p\u003e\n\u003cp class=\"app__feature__card__description app__feature__card__description--left\"\u003eThis 8-pin 1 kW stainless steel thru-hull transducer features high-definition midband CHIRP sonar that clearly defines fish targets and structure down to 1,800’ in saltwater and 2,400’ in freshwater.\u003c\/p\u003e\n\u003cp\u003eBroad frequency range\u003c\/p\u003e\n\u003cp class=\"app__feature__card__description app__feature__card__description--left\"\u003eUse the perfect frequency for the waters you’re fishing. Covering the medium frequency range, this transducer pulses from 80–165 kHz, displaying a wide coverage area, clear fish arches and accurate depth readings.\u003c\/p\u003e\n\u003cp\u003eOptimum ping sensitivity\u003c\/p\u003e\n\u003cp class=\"app__feature__card__description app__feature__card__description--left\"\u003eOffering excellent sonar sensitivity, low noise, high resolution and good separation of targets, this robust transducer makes it easier than ever to distinguish fish and structure on your compatible chartplotter display.\u003c\/p\u003e\n\u003cdiv class=\"app__feature__card\" data-translate=\"\"\u003e\n\u003cp\u003eTHRU-HULL Installation\u003c\/p\u003e\n\u003cp class=\"app__feature__card__description app__feature__card__description--left\"\u003eA durable stainless steel housing and stem offer straightforward thru-hull flush mounting for minimum drag and optimum beam orientation for clear sonar returns.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"app__feature__card\" data-translate=\"\"\u003e\n\u003cp\u003eAUTO-ID Technology\u003c\/p\u003e\n\u003cp class=\"app__feature__card__description app__feature__card__description--left\"\u003eEnjoy simple plug-and-play operation with Garmin auto-identification technology — which enables the sonar to automatically configure itself to the transducer being used.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"app__feature__card\" data-translate=\"\"\u003e\n\u003cp\u003eFits various hull types\u003c\/p\u003e\n\u003cp class=\"app__feature__card__description app__feature__card__description--left\"\u003eConfigurable for a wide variety of boat hull materials, including fiberglass, composite, steel, aluminum and wood, the transducer is available in a range of tilt versions to accommodate deadrise angles of 0-24 degrees without a fairing block.\u003c\/p\u003e\n\u003ch3\u003eContent:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGT17M-THF transducer\u003c\/li\u003e\n\u003cli\u003eJam nut\u003c\/li\u003e\n\u003cli\u003eSpacer\u003c\/li\u003e\n\u003cli\u003e2 washers\u003c\/li\u003e\n\u003cli\u003e2 set screws\u003c\/li\u003e\n\u003cli\u003eThread isolator\u003c\/li\u003e\n\u003cli\u003eHull isolator\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr class=\"title\"\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003ch4 style=\"text-align: center;\"\u003eGeneral\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTransducer frequency\u003c\/th\u003e\n\u003ctd\u003eMedium band CHIRP (80-165 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTransducer power\u003c\/th\u003e\n\u003ctd\u003e1 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTransducer beamwidth\u003c\/th\u003e\n\u003ctd\u003e9°-18°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTransducer maximum depth\u003c\/th\u003e\n\u003ctd\u003e1800 ft saltwater; 2400 ft freshwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRapidReturn\u003csup class=\"tm-symbol\"\u003e™\u003c\/sup\u003e sonar compatible\u003c\/th\u003e\n\u003ctd class=\"yes\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTransducer cable length\u003c\/th\u003e\n\u003ctd\u003e50 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTransducer depth\/speed\/temperature\u003c\/th\u003e\n\u003ctd\u003eDepth, temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTransducer number of pins\u003c\/th\u003e\n\u003ctd\u003e8-pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTransducer supported deadrise\/transom angles\u003c\/th\u003e\n\u003ctd\u003e0° supports hull deadrise angles from 0° to 7°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHousing material\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=20dceb9046789782037f255edb56fd75a29082629994030fd28784def48503f2 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eAre special components needed for metal hull installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, for aluminum or steel hulls, you must use the included galvanic isolation components as instructed.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow can I prepare a cored-fiberglass hull for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYou must drill a pilot hole, cut the transducer hole, and seal the core with fiberglass or casting epoxy.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should you test for leaks after installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eCheck for leaks around any screw holes before leaving the boat in the water for extended periods.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs software updating required when installing the transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, you must update the Garmin chartplotter software when you install this device.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould the transducer be mounted parallel to the boat's centerline?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, the transducer should be mounted parallel to the bow-stern axis of your vessel.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the transducer cable be routed?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eRoute the cable away from other wiring and engines, avoid pinching, use grommets for bulkheads, and secure with zip ties without over-tightening.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat precautions should be taken when drilling into the hull?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAlways check what's on the opposite side before drilling, and wear safety goggles, ear protection, and a dust mask.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the transducer be operated out of the water?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eNo, always operate the transducer when it is submerged. Operating in air may cause overheating and damage.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should you do if the cable is not long enough?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIf the cable is too short, you can purchase an extension cable from your Garmin dealer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat cleaning products can be used on the transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eClean with a soft cloth and mild detergent. Do not use solvents, power sanders, or pressure washers.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould you use the cable to lift the transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eNo, do not use the cable to pick up or pull the transducer, to prevent damage.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Are special components needed for metal hull installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, for aluminum or steel hulls, you must use the included galvanic isolation components as instructed.\"}}, {\"@type\": \"Question\", \"name\": \"How can I prepare a cored-fiberglass hull for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"You must drill a pilot hole, cut the transducer hole, and seal the core with fiberglass or casting epoxy.\"}}, {\"@type\": \"Question\", \"name\": \"How should you test for leaks after installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Check for leaks around any screw holes before leaving the boat in the water for extended periods.\"}}, {\"@type\": \"Question\", \"name\": \"Is software updating required when installing the transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, you must update the Garmin chartplotter software when you install this device.\"}}, {\"@type\": \"Question\", \"name\": \"Should the transducer be mounted parallel to the boat's centerline?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, the transducer should be mounted parallel to the bow-stern axis of your vessel.\"}}, {\"@type\": \"Question\", \"name\": \"How should the transducer cable be routed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Route the cable away from other wiring and engines, avoid pinching, use grommets for bulkheads, and secure with zip ties without over-tightening.\"}}, {\"@type\": \"Question\", \"name\": \"What precautions should be taken when drilling into the hull?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Always check what's on the opposite side before drilling, and wear safety goggles, ear protection, and a dust mask.\"}}, {\"@type\": \"Question\", \"name\": \"Can the transducer be operated out of the water?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, always operate the transducer when it is submerged. Operating in air may cause overheating and damage.\"}}, {\"@type\": \"Question\", \"name\": \"What should you do if the cable is not long enough?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If the cable is too short, you can purchase an extension cable from your Garmin dealer.\"}}, {\"@type\": \"Question\", \"name\": \"What cleaning products can be used on the transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Clean with a soft cloth and mild detergent. Do not use solvents, power sanders, or pressure washers.\"}}, {\"@type\": \"Question\", \"name\": \"Should you use the cable to lift the transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, do not use the cable to pick up or pull the transducer, to prevent damage.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626207478097,"sku":"010-02930-00","price":1245.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/1-154.jpg?v=1754731101"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/collections\/Captura_de_pantalla_5-11-2025_14615_www.garmin.com_4659071a-4089-4f14-b744-2370e7955d7d.jpg?v=1762348089","url":"https:\/\/www.sailrace.com\/en-au\/collections\/garmin-chirp-traditional-thru-hull-transducers.oembed","provider":"SailRACE","version":"1.0","type":"link"}