{"title":"Switch Panels","description":"","products":[{"product_id":"garmin-td-50-5-touch-screen","title":"Garmin TD 50, 5\" touch screen","description":"\u003cp\u003eControl at your fingertips\u003c\/p\u003e \u003cp\u003eWhenever you need more access to the on-board system, the 5′′ TD 50 touch screen adapts to your needs. Check the data of the engine and systems or adjust the settings of lighting, air conditioning, entertainment, safety sensors, autopilots and much more.\u003c\/p\u003e \u003cp\u003eScalable technology\u003c\/p\u003e \u003cp\u003eThe touch screen of the TD 50, easy to use and install, can work as an additional screen at the rudder station or to network access the switching and data monitoring functions of the entire boat under deck.\u003c\/p\u003e \u003cp\u003eEasy integration into systems\u003c\/p\u003e \u003cp\u003eTo obtain an integrated digital control on board, the TD 50 touch screen is compatible with NMEA 2000, third-party systems, OneHelm™ EmpirBus and the Garmin network. System connectivity couldn't be simpler.\u003c\/p\u003e \u003cp\u003eIntuitive interface\u003c\/p\u003e \u003cp\u003eThe control by touch screen through a simple graphical interface allows you to access various switching functions and supervision of the electrical components of the entire boat.\u003c\/p\u003e \u003cp\u003eVersatile assembly options\u003c\/p\u003e \u003cp\u003eThe stylized design, the minimum size and the flat or recessed mounting options of the TD 50 unit, allow it to be installed in virtually any location on board where access to the auxiliary system is needed.\u003c\/p\u003e \u003cp\u003eResistant and durable design\u003c\/p\u003e \u003cp\u003eIt has an IPX7 water resistance rating, the touch screen of the TD 50 has been designed for the most demanding nautical environments. The bright LCD screen offers clear and sharp visibility in daylight, adjustable backlight and a wide viewing angle to provide excellent readability anywhere it is used on board.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eMisc\u003c\/td\u003e \u003ctd\u003e \u003ctable style=\"height: 559px;\" width=\"750\"\u003e \u003ccolgroup\u003e \u003ccol width=\"33%\"\u003e \u003ccol width=\"67%\"\u003e \u003c\/colgroup\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd colspan=\"2\"\u003e \u003ch4\u003eDescription\u003c\/h4\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDimensions without the cover for the sun (H. x H. x Pr.)\u003c\/td\u003e \u003ctd\u003e10,5 X 14,0 X 5,1 cm (4,1\" X 4,5\" X 2,0\")\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDimensions with the cover for the sun (H. x H. x D.)\u003c\/td\u003e \u003ctd\u003e11,3 X 14,4 X 5,6 cm (4,5\" X 5,7\" X 2,2\")\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWeight without the cover for the sun\u003c\/td\u003e \u003ctd\u003e328 g (11,6 oz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWeight with the sun cover\u003c\/td\u003e \u003ctd\u003e375 g (13,2 oz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eTemperature range\u003c\/td\u003e \u003ctd\u003eDe -15 a 55 °C (de 5 a 131 °F)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSafety distance of the compass\u003c\/td\u003e \u003ctd\u003e20 cm (7,9\")\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eConstruction of the cables\u003c\/td\u003e \u003ctd\u003eFully sealed polycarbonate\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eLens material\u003c\/td\u003e \u003ctd\u003eGlass with anti-reflective and anti-fingerprint finish\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eClassification of water resistance\u003c\/td\u003e \u003ctd\u003eIPX7\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShine\u003c\/td\u003e \u003ctd\u003e1200 cd\/m2 (nits)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eElectricity consumption\u003c\/td\u003e \u003ctd\u003e5,9 W MáX.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eNMEA 2000® input voltage\u003c\/td\u003e \u003ctd\u003eDe 9 a 16 V de CC\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eLen NMEA 2000 a 9 V de cc\u003c\/td\u003e \u003ctd\u003e13 (650 mA)\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=045d329587c0d8a43504b5b23826093439a8a8e6e469df9806af0d7ffd09729f --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eShould cables be connected before flush mounting the device?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, connect all necessary cables before mounting if access to the back will be blocked after installation.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should I route cables for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eEnsure enough room behind the mounting surface for routing and connecting cables before securing the device.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat gasket steps should be followed during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eInstall the adhesive-backed rubber gasket pieces onto the back of the device after preparing the mounting surface and before placement.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there important safety precautions during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAlways wear safety goggles, ear protection, and a dust mask when drilling or cutting. Disconnect vessel power before starting and ensure proper grounding.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan screws other than those supplied be used for mounting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eNo, only use the included screws. Using other screws may void your warranty and could damage the device.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould the provided mounting template be used?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, use the included mounting template. Printing your own template risks incorrect sizing and may lead to a faulty cutout.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow is the device held securely in place during mounting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eUse the included screws (wood or machine screws, with nut plates if needed) and snap trim caps over the screws once mounted.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs the TD 50 suitable for locations close to magnetic compasses?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eNo, install at least the compass-safe distance away to avoid interference, as stated in the product specifications.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the guidance for installing the gasket pieces?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eInstall the adhesive-backed rubber gasket pieces on the back of the device after removing the protective liner.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhere should the TD 50 be mounted for best performance?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMount at or below eye level on a flat, strong surface. Avoid mounting where exposed to extreme temperatures or excessive vibration\/shock.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there special instructions for cutting the mounting surface?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eBe careful—there's minimal clearance between the case and mounting holes. Cutting too large a hole could compromise stability.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should you prepare the mounting surface for cutting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDrill one or more holes inside the template outline using a 9 mm (3\/8 in.) bit before cutting with a jigsaw or rotary tool.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs standalone operation possible for the TD 50?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eNo, the device will not function as a stand-alone unit; it must be networked with compatible Garmin Marine Network chartplotters.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow is the software updated on the TD 50?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eSoftware updates require either a Garmin memory card reader accessory or another Garmin chartplotter over the Garmin Marine Network.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do you adjust the display backlight?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eSelect the 'Backlight' menu or press the power button repeatedly from any screen to scroll through brightness levels.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow can the display be locked to prevent accidental touches?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eSelect \u0026gt; Lock Touchscreen to lock. Select to unlock the screen when needed.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow is the TD 50 secured when using nut plates?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eNut plates are placed behind the surface, aligned with drilled holes. An M3 pan-head screw fastens each plate for stability.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do you snap the trim caps into place?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAfter securing the device with screws, snap the trim caps into place over the screws as the last step.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Should cables be connected before flush mounting the device?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, connect all necessary cables before mounting if access to the back will be blocked after installation.\"}}, {\"@type\": \"Question\", \"name\": \"How should I route cables for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Ensure enough room behind the mounting surface for routing and connecting cables before securing the device.\"}}, {\"@type\": \"Question\", \"name\": \"What gasket steps should be followed during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Install the adhesive-backed rubber gasket pieces onto the back of the device after preparing the mounting surface and before placement.\"}}, {\"@type\": \"Question\", \"name\": \"Are there important safety precautions during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Always wear safety goggles, ear protection, and a dust mask when drilling or cutting. Disconnect vessel power before starting and ensure proper grounding.\"}}, {\"@type\": \"Question\", \"name\": \"Can screws other than those supplied be used for mounting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, only use the included screws. Using other screws may void your warranty and could damage the device.\"}}, {\"@type\": \"Question\", \"name\": \"Should the provided mounting template be used?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, use the included mounting template. Printing your own template risks incorrect sizing and may lead to a faulty cutout.\"}}, {\"@type\": \"Question\", \"name\": \"How is the device held securely in place during mounting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Use the included screws (wood or machine screws, with nut plates if needed) and snap trim caps over the screws once mounted.\"}}, {\"@type\": \"Question\", \"name\": \"Is the TD 50 suitable for locations close to magnetic compasses?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, install at least the compass-safe distance away to avoid interference, as stated in the product specifications.\"}}, {\"@type\": \"Question\", \"name\": \"What is the guidance for installing the gasket pieces?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Install the adhesive-backed rubber gasket pieces on the back of the device after removing the protective liner.\"}}, {\"@type\": \"Question\", \"name\": \"Where should the TD 50 be mounted for best performance?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Mount at or below eye level on a flat, strong surface. Avoid mounting where exposed to extreme temperatures or excessive vibration\/shock.\"}}, {\"@type\": \"Question\", \"name\": \"Are there special instructions for cutting the mounting surface?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Be careful—there's minimal clearance between the case and mounting holes. Cutting too large a hole could compromise stability.\"}}, {\"@type\": \"Question\", \"name\": \"How should you prepare the mounting surface for cutting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Drill one or more holes inside the template outline using a 9 mm (3\/8 in.) bit before cutting with a jigsaw or rotary tool.\"}}, {\"@type\": \"Question\", \"name\": \"Is standalone operation possible for the TD 50?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, the device will not function as a stand-alone unit; it must be networked with compatible Garmin Marine Network chartplotters.\"}}, {\"@type\": \"Question\", \"name\": \"How is the software updated on the TD 50?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Software updates require either a Garmin memory card reader accessory or another Garmin chartplotter over the Garmin Marine Network.\"}}, {\"@type\": \"Question\", \"name\": \"How do you adjust the display backlight?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Select the 'Backlight' menu or press the power button repeatedly from any screen to scroll through brightness levels.\"}}, {\"@type\": \"Question\", \"name\": \"How can the display be locked to prevent accidental touches?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Select \u003e Lock Touchscreen to lock. Select to unlock the screen when needed.\"}}, {\"@type\": \"Question\", \"name\": \"How is the TD 50 secured when using nut plates?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Nut plates are placed behind the surface, aligned with drilled holes. An M3 pan-head screw fastens each plate for stability.\"}}, {\"@type\": \"Question\", \"name\": \"How do you snap the trim caps into place?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"After securing the device with screws, snap the trim caps into place over the screws as the last step.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626142695761,"sku":"010-02139-10","price":506.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-td-50-5-touch-screen-td50-oem-hr-1005.png?v=1754729586"},{"product_id":"garmin-empirbus-sp8-and-sp12-switches","title":"Garmin EmpirBus SP8 and SP12 switches","description":"\u003cp\u003eSP8 and SP12 are components of digital switches for EmpirBus control, monitoring and distribution systems. SP8 is an 8-way switch; SP12 can have a 12-way screenless configuration or a 10-way 2-way screen. These units provide control inputs to the EmpirBus system through the switches, in addition to status information to the user through the individual LED indicators.\u003c\/p\u003e\n\u003cp\u003eThe panels can be installed vertically or horizontally. Assembling the units is easy thanks to the template provided. The SP12 switch is designed to be installed in an indoor space, while the SP8 switch can be installed both outdoors and inside the boat. If installed outside, SP8 is water resistant (IP67) from the front, and the front plate is resistant to ultraviolet rays in adverse maritime conditions. Both the SP8 and SP12 devices have legends of switches for the user, night backlight and alarm indications. They are designed to operate between -20 and 55 °C of temperature.\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003ctable style=\"height: 1215px\" width=\"835\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMisc\u003c\/td\u003e\n\u003ctd\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003ctable style=\"height: 177px\" width=\"742\"\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"33%\"\u003e\n\u003ccol width=\"67%\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (An. x Al. x Pr.)\u003c\/td\u003e\n\u003ctd\u003e230 X 106 X 38 mm (9,1″ X 4,2″ X 1,5″)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (unit only)\u003c\/td\u003e\n\u003ctd\u003e400 g (14.1 oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient temperature\u003c\/td\u003e\n\u003ctd\u003eDe -20 °C a 55 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClassification of the water in the box\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication\u003c\/td\u003e\n\u003ctd\u003eRed CAN-bus NMEA 2000\u003csup\u003e®\u003c\/sup\u003e, LEN-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eDepartures\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"33%\"\u003e\n\u003ccol width=\"67%\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh lateral\u003c\/td\u003e\n\u003ctd\u003e13 channels of 10 A, 7 channels of 5 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eDigital ticket\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"33%\"\u003e\n\u003ccol width=\"67%\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrounding switch input\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMonitor of the bilde bomb\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eAnalog input\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"33%\"\u003e\n\u003ccol width=\"67%\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltios\u003c\/td\u003e\n\u003ctd\u003e3 a 0-16 V +\/-1 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance\u003c\/td\u003e\n\u003ctd\u003e2 a 0-1500 ohmios +\/-5 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003ePower Supply\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"33%\"\u003e\n\u003ccol width=\"67%\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum current\u003c\/td\u003e\n\u003ctd\u003e50 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption off\u003c\/td\u003e\n\u003ctd\u003e60 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage (12 V)\u003c\/td\u003e\n\u003ctd\u003e9-16 V cc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eConnector\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"33%\"\u003e\n\u003ccol width=\"67%\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNMEA 2000®\u003c\/td\u003e\n\u003ctd\u003eMacro micro M12 de 5 pines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannels\u003c\/td\u003e\n\u003ctd\u003eMolex MX150 L 16 Circuits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower terminal\u003c\/td\u003e\n\u003ctd\u003ePerno M6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Garmin","offers":[{"title":"SP12, vertical","offer_id":51626142761297,"sku":"010-02372-00","price":506.78,"currency_code":"EUR","in_stock":true},{"title":"SP8, vertical","offer_id":51626142794065,"sku":"010-02369-00","price":698.03,"currency_code":"EUR","in_stock":true},{"title":"SP8, horizontal","offer_id":51626142826833,"sku":"010-02368-00","price":698.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-empirbus-sp8-and-sp12-switches-empirbustm-sp8-and-sp12-switches.webp?v=1754729585"},{"product_id":"garmin-sp8-empirbus-8-way-switch-panel-horizontal-ip67-e50","title":"Garmin SP8, EmpirBus, 8-way Switch Panel, Horizontal, IP67, E50","description":"\u003cp\u003eUse this Garmin EmpirBus module as part of a compatible digital switching or onboard power-management installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReference:\u003c\/strong\u003e SP8, EmpirBus, Panel de conmutación de 8 vías, Horizontal, IP67,E50\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned for marine electrical-system integration within compatible Garmin EmpirBus setups.\u003c\/li\u003e\n\u003cli\u003eSuitable for service replacement or expansion of an existing EmpirBus installation.\u003c\/li\u003e\n\u003cli\u003eUseful when maintaining a modular digital-switching architecture across compatible onboard circuits and controls.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626142859601,"sku":"010-02368-01","price":698.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/www.sailrace.com-cropped-sailrace-logo-transp-vertical_45071c3c-bf95-4143-8037-2bbab1f9cea1.png?v=1756849392"},{"product_id":"garmin-accy-sp12-cbl-empirbus-power-supply-6-mm-ring-terminals","title":"Garmin Accy, SP12 cbl, EmpirBus, power supply, 6 mm ring terminals","description":"\u003cp\u003eUse this Garmin EmpirBus module as part of a compatible digital switching or onboard power-management installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReference:\u003c\/strong\u003e Cable, Panel cbl, EmpirBus, 4 polos F, M12 Macho recto, 3m\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned for marine electrical-system integration within compatible Garmin EmpirBus setups.\u003c\/li\u003e\n\u003cli\u003eSuitable for service replacement or expansion of an existing EmpirBus installation.\u003c\/li\u003e\n\u003cli\u003eUseful when maintaining a modular digital-switching architecture across compatible onboard circuits and controls.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626142892369,"sku":"010-12984-56","price":44.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/www.sailrace.com-cropped-sailrace-logo-transp-vertical_45071c3c-bf95-4143-8037-2bbab1f9cea1.png?v=1756849392"}],"url":"https:\/\/www.sailrace.com\/en-caucasus\/collections\/switch-panels.oembed","provider":"SailRACE","version":"1.0","type":"link"}