{"product_id":"garmin-autopilot-reactor-40-for-outboard-engine-with-autopilot-instrument-ghc-50","title":"Garmin Autopilot Reactor 40 for outboard engine With autopilot instrument GHC 50","description":"\u003cp\u003eDesigned for small boats with a gasoline engine, the Reactor 40 autopilot for outboard motor gives you a hand so you can fish and explore paradise without worries.\u003c\/p\u003e \u003cp\u003eCompatibility with autopilot\u003c\/p\u003e \u003cp\u003eThis autopilot for outboard motor works on small boats with a gasoline outboard engine of up to 25 horsepower1.\u003c\/p\u003e \u003cp\u003eStay on the course\u003c\/p\u003e \u003cp\u003eWhether you want to fish for your favorite species or if you simply want to go out with the sailboat from the marina, this autopilot helps you maintain control of the course so as not to deviate from the route, even with wind, waves or strong currents.\u003c\/p\u003e \u003cp\u003eEASY-TO-USE Remote control\u003c\/p\u003e \u003cp\u003eThe Reactor 40 autopilot for outboard motor includes a practical floating remote control with a bright screen and readable in sunlight. It allows you to quickly and easily control the configuration of the accelerator, as well as put the engine in idle when throwing the nets or when reaching the mooring.\u003c\/p\u003e \u003cp\u003eGhc 50 optional pack\u003c\/p\u003e \u003cp\u003eCombine the Reactor 40 autopilot with the GHC 50 autopilot instrument to add a specific autopilot touch screen to the control bridge. In addition, GHC 50 allows you to share data and settings with Garmin multifunction displays and other Garmin devices installed.\u003c\/p\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=722aa4f8f78eeb3975ec7b1c7f1189881d63ccdd1e2bfa592d7432b72a0b313d --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWho should install the Reactor 40 Autopilot system?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe autopilot system should be installed by a qualified marine installer with knowledge of marine steering and electrical systems.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs this system compatible with Garmin's Shadow Drive valve?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThis autopilot system is not compatible with the Shadow Drive valve; you must disable it after setup to avoid errors.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should be avoided during compass calibration?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eKeep the boat steady and flat; avoid listing or unbalanced loading during compass calibration for best accuracy.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat configuration wizards must be run during setup?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYou must run the Dockside Wizard and the Sea Trial Wizard to configure the autopilot for your boat.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the Dockside Wizard be performed with the boat out of water?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, you can complete the Dockside Wizard while the boat is in or out of the water. If afloat, the boat must remain stationary.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan gain and tuning settings be adjusted manually?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eGain and acceleration limiter settings can be manually adjusted after running wizards for fine-tuning autopilot behavior.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow can you select a preferred data source for sensors?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYou can select a preferred source for each data category via the helm control or chartplotter in the Preferred Sources menu.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there specific warnings about hot or moving parts?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eBeware of hot surfaces on heat-sink, motor, and solenoid components; also, beware of entrapment or pinching from moving parts.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Who should install the Reactor 40 Autopilot system?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The autopilot system should be installed by a qualified marine installer with knowledge of marine steering and electrical systems.\"}}, {\"@type\": \"Question\", \"name\": \"Is this system compatible with Garmin's Shadow Drive valve?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This autopilot system is not compatible with the Shadow Drive valve; you must disable it after setup to avoid errors.\"}}, {\"@type\": \"Question\", \"name\": \"What should be avoided during compass calibration?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Keep the boat steady and flat; avoid listing or unbalanced loading during compass calibration for best accuracy.\"}}, {\"@type\": \"Question\", \"name\": \"What configuration wizards must be run during setup?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"You must run the Dockside Wizard and the Sea Trial Wizard to configure the autopilot for your boat.\"}}, {\"@type\": \"Question\", \"name\": \"Can the Dockside Wizard be performed with the boat out of water?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, you can complete the Dockside Wizard while the boat is in or out of the water. If afloat, the boat must remain stationary.\"}}, {\"@type\": \"Question\", \"name\": \"Can gain and tuning settings be adjusted manually?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Gain and acceleration limiter settings can be manually adjusted after running wizards for fine-tuning autopilot behavior.\"}}, {\"@type\": \"Question\", \"name\": \"How can you select a preferred data source for sensors?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"You can select a preferred source for each data category via the helm control or chartplotter in the Preferred Sources menu.\"}}, {\"@type\": \"Question\", \"name\": \"Are there specific warnings about hot or moving parts?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Beware of hot surfaces on heat-sink, motor, and solenoid components; also, beware of entrapment or pinching from moving parts.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626155213137,"sku":"010-02794-09","price":2375.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-autopilot-reactor-40-for-outboard-engine-with-autopilot-instrument-ghc-50-captura-de-pantalla-2024-05-08-a-las-18.32.26.png?v=1754729867","url":"https:\/\/www.sailrace.com\/en-caucasus\/products\/garmin-autopilot-reactor-40-for-outboard-engine-with-autopilot-instrument-ghc-50","provider":"SailRACE","version":"1.0","type":"link"}