{"product_id":"garmin-gps-24xd-hvs","title":"Garmin GPS 24xd HVS","description":"\u003cp\u003eGNSS Multibanda\u003c\/p\u003e \u003cp\u003eThe multi-band GNSS gives you a precise location1 within the 1-meter radius with nautical multifunction screens, instrument displays and compatible autopilots.\u003c\/p\u003e \u003cp\u003eMagnetic course\u003c\/p\u003e \u003cp\u003eThe magnetic course sensor provides an accuracy of up to 3 degrees, card stabilization, radar overlap and MARPA even at low speeds\u003c\/p\u003e \u003cp\u003eHigh sensitivity GPS\u003c\/p\u003e \u003cp\u003eThe fast frequencies of 10 Hz position updates provide high-sensitivity position, speed and time data.\u003c\/p\u003e \u003cp\u003eExtended GNSS compatibility\u003c\/p\u003e \u003cp\u003eGPS 24xd provides access to four key global satellite navigation systems (GPS, Galileo2, GLONASS and BeiDou2) to perform more accurate tracking in demanding conditions than if only GPS is used.\u003c\/p\u003e \u003cp\u003eCompatible with several sbas\u003c\/p\u003e \u003cp\u003eMulti-SBAS compatibility corrects signal measurement errors and provides information about the accuracy, integrity, continuity and availability of your signals.\u003c\/p\u003e \u003cp\u003eAssembly options\u003c\/p\u003e \u003cp\u003eThe installation is simple thanks to the mounting options under deck, on the post and on the surface.\u003c\/p\u003e \u003ch3\u003eFeatures:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDimensions (depth X height): 91.6 mm X 49.5 mm\u003c\/li\u003e \u003cli\u003eWeight: 201 g\u003c\/li\u003e \u003cli\u003eCable length: 6 m\u003c\/li\u003e \u003cli\u003eTemperature range: from -30 to 80 °C\u003c\/li\u003e \u003cli\u003eCase material: fully sealed plastic alloy with high impact resistance, water resistant in accordance with IPX7 standards\u003c\/li\u003e \u003cli\u003eSafety distance from the compass: 150 mm\u003c\/li\u003e \u003cli\u003ePower supply: 8-33 V DC, irregular\u003c\/li\u003e \u003cli\u003ePower outlet: from 150 mA to 12 V DC\u003c\/li\u003e \u003cli\u003ePosition accuracy, typical nautical use: \u0026lt; 50 cm, Cep 50%; \u0026lt; 1 meter, 88%\u003c\/li\u003e \u003c\/ul\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=b71099dfad4d52f899d58c62c42c9fc5c5522a6f281dc05db17611696d4b7034 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eIs marine sealant required for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMarine sealant is optional. It can be used to fill any remaining gaps in the cable slot when mounting on a pole, or to seal cable holes where needed.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow can I test the mounting location before permanent installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTemporarily secure the antenna and ensure proper operation. Move and retest as needed to avoid interference or signal loss.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat maintenance does the outer casing require?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eClean with a cloth dampened with mild detergent; avoid chemical cleaners or solvents to prevent damage.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the cable be routed during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eRoute the cable away from sources of electronic interference, such as engines and power lines, for best performance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat type of pole can be used for pole mounting the GPS 24xd HVS?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA standard 1 in. OD, 14 threads per inch, pipe-threaded pole (not included) is required for pole mounting.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow can I limit the antenna's output update rate to 1 Hz?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eSolder the included Update Rate Select (resistor) cable to the orange Accessory on wire. The antenna will then output at 1 Hz.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhere should the antenna be mounted for best GPS performance?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eChoose a location with a clear, unobstructed sky view, away from superstructure, radome, the mast, engines, EMI, and ferrous metals.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow is basic heading calibration performed?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAfter connecting the display, perform two slow, tight circles at least 6.4 km\/h in calm water, and then align heading as needed.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the antenna be mounted with regard to radar and VHF antennas?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDon't mount within 1 meter of a VHF radio antenna or in the radar's path; best above the radar path, never shaded by superstructure.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do I disable magnetic heading data?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDrive the boat in two slow, tight circles after power cycling; remain stationary for 2 minutes to trigger heading disable sequence.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the outer casing of the GPS 24xd HVS be cleaned?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eClean the casing with a cloth dampened by mild detergent solution. Avoid chemical cleaners and solvents to protect plastic components.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Is marine sealant required for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Marine sealant is optional. It can be used to fill any remaining gaps in the cable slot when mounting on a pole, or to seal cable holes where needed.\"}}, {\"@type\": \"Question\", \"name\": \"How can I test the mounting location before permanent installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Temporarily secure the antenna and ensure proper operation. Move and retest as needed to avoid interference or signal loss.\"}}, {\"@type\": \"Question\", \"name\": \"What maintenance does the outer casing require?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Clean with a cloth dampened with mild detergent; avoid chemical cleaners or solvents to prevent damage.\"}}, {\"@type\": \"Question\", \"name\": \"How should the cable be routed during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Route the cable away from sources of electronic interference, such as engines and power lines, for best performance.\"}}, {\"@type\": \"Question\", \"name\": \"What type of pole can be used for pole mounting the GPS 24xd HVS?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A standard 1 in. OD, 14 threads per inch, pipe-threaded pole (not included) is required for pole mounting.\"}}, {\"@type\": \"Question\", \"name\": \"How can I limit the antenna's output update rate to 1 Hz?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Solder the included Update Rate Select (resistor) cable to the orange Accessory on wire. The antenna will then output at 1 Hz.\"}}, {\"@type\": \"Question\", \"name\": \"Where should the antenna be mounted for best GPS performance?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Choose a location with a clear, unobstructed sky view, away from superstructure, radome, the mast, engines, EMI, and ferrous metals.\"}}, {\"@type\": \"Question\", \"name\": \"How is basic heading calibration performed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"After connecting the display, perform two slow, tight circles at least 6.4 km\/h in calm water, and then align heading as needed.\"}}, {\"@type\": \"Question\", \"name\": \"How should the antenna be mounted with regard to radar and VHF antennas?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Don't mount within 1 meter of a VHF radio antenna or in the radar's path; best above the radar path, never shaded by superstructure.\"}}, {\"@type\": \"Question\", \"name\": \"How do I disable magnetic heading data?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Drive the boat in two slow, tight circles after power cycling; remain stationary for 2 minutes to trigger heading disable sequence.\"}}, {\"@type\": \"Question\", \"name\": \"How should the outer casing of the GPS 24xd HVS be cleaned?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Clean the casing with a cloth dampened by mild detergent solution. Avoid chemical cleaners and solvents to protect plastic components.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626147676497,"sku":"010-02316-00","price":234.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gps-24xd-hvs-010-01010-00-hr-031-scaled.jpg?v=1754729729","url":"https:\/\/www.sailrace.com\/en-caucasus\/products\/garmin-gps-24xd-hvs","provider":"SailRACE","version":"1.0","type":"link"}