{"product_id":"garmin-gt12-m-thf","title":"Garmin GT12 m-THF","description":"\u003cp\u003eThis CHIRP transducer with a median frequency band of 350 watts and built-in mounting has been designed to reduce resistance and optimize the performance of the probe in medium-sized fishing or navigation boats, and clearly defines the fish arches, structures and depth returns of the bottom on the screen.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOptimal Pulse Sensitivity\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe robust transducer offers excellent probe sensitivity, low noise, high resolution and good lens separation, which makes distinguishing the fish and structures on the screen of your compatible plotter easier than ever.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation of Helmets\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe durable bronze housing and wheel allow a simple built-in mounting of the helmets with which a minimum resistance and an optimal orientation of the beam are achieved to obtain clear probe data.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAutomatic Identification Technology\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eEnjoy simple plug-and-play operation with Garmin's automatic identification technology, which allows the probe to be automatically configured depending on the transducer being used.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIt Adapts to Various Types of Helmets\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe transducer can be configured for a wide variety of hull materials, such as fiberglass, laminated materials and wood, and can be mounted with several inclinations to allow pantoque angles from 0 to 24 degrees without a bar.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWide Range of Frequencies\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eUse the perfect frequency for the areas where you fish. This transducer, which covers the average frequency range, emits pulses from 85 to 165 kHz and offers a wide coverage area, sharp fish arcs and accurate depth readings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTraditional CHIRP Probe with Medium Frequency Band\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThis 350-watt, 8-pin bronze helmet transducer has a CHIRP probe with a high-definition medium frequency band that clearly defines fishing targets and structures at depths of up to 240 m in salt water and 365 m in fresh water.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003ePhysical And Performance Characteristics\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eFrequency\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eCHIRP with medium frequency band (85-165 kHz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eEnergy\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e350 W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eBeam Width\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e24°-16°\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eMaximum Depth\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e240 meters in salt water; 365 meters in fresh water\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eRapidreturn™ Sonar Compatible\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eCable Length\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e15 meters\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eDEPTH\/SPEED\/TEMPERATURE\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eDepth, temperature\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eNumber of Sideburns\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e8 pines\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eAft Mirror Angles Allowed\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eThe 0° inclination is compatible with hull pantoque angles from 0° to 7°\u003cbr\u003e The inclination of 12° is compatible with pantoque angles of the hull from 8° to 15°\u003cbr\u003e The 20° inclination is compatible with hull pantoque angles from 16° to 24°\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eHousing Material\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eBronze\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=fa981c282ba3edaa4504da06bc8919b94fb6197060796df09326d92df1ddbc9c --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWhat type of marine sealant should be used for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA flexible, fast-cure marine sealant for below the waterline should be used with the GT12 m-THF transducer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the transducer cable be routed during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eRoute the cable away from other wiring and engines to avoid possible interference with the sonar signal.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the hull nut be tightened for a fiberglass hull installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTighten with a suitable wrench, but do not over-tighten to prevent hull damage.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should you choose the correct transducer inclination for your hull?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYou should match the transducer's angle to the hull's deadrise at the installation point for optimal sonar performance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat safety precautions should be taken during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eWear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding during installation.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs it permissible to cut or splice the transducer cable?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDo not cut or splice the cable except for bare-wire sonar box use, as this may void your warranty.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhere should the transducer be mounted for best performance?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMount in clean, non-turbulent water, away from strakes, struts, or anything creating bubbles or turbulence.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat precaution should be taken when cleaning the GT12 m-THF transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDo not use solvents such as mineral spirits, acetone, or MEK. Only use a soft cloth and mild detergent for cleaning.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat safety precautions should be taken when drilling or cutting the hull?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAlways check the opposite side before drilling and wear safety goggles, ear protection, and a dust mask.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow can you protect the transducer cable passing through a bulkhead?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eUse grommets to protect the cable if it passes through bulkheads.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What type of marine sealant should be used for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A flexible, fast-cure marine sealant for below the waterline should be used with the GT12 m-THF transducer.\"}}, {\"@type\": \"Question\", \"name\": \"How should the transducer cable be routed during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Route the cable away from other wiring and engines to avoid possible interference with the sonar signal.\"}}, {\"@type\": \"Question\", \"name\": \"How should the hull nut be tightened for a fiberglass hull installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Tighten with a suitable wrench, but do not over-tighten to prevent hull damage.\"}}, {\"@type\": \"Question\", \"name\": \"How should you choose the correct transducer inclination for your hull?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"You should match the transducer's angle to the hull's deadrise at the installation point for optimal sonar performance.\"}}, {\"@type\": \"Question\", \"name\": \"What safety precautions should be taken during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding during installation.\"}}, {\"@type\": \"Question\", \"name\": \"Is it permissible to cut or splice the transducer cable?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Do not cut or splice the cable except for bare-wire sonar box use, as this may void your warranty.\"}}, {\"@type\": \"Question\", \"name\": \"Where should the transducer be mounted for best performance?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Mount in clean, non-turbulent water, away from strakes, struts, or anything creating bubbles or turbulence.\"}}, {\"@type\": \"Question\", \"name\": \"What precaution should be taken when cleaning the GT12 m-THF transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Do not use solvents such as mineral spirits, acetone, or MEK. Only use a soft cloth and mild detergent for cleaning.\"}}, {\"@type\": \"Question\", \"name\": \"What safety precautions should be taken when drilling or cutting the hull?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Always check the opposite side before drilling and wear safety goggles, ear protection, and a dust mask.\"}}, {\"@type\": \"Question\", \"name\": \"How can you protect the transducer cable passing through a bulkhead?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Use grommets to protect the cable if it passes through bulkheads.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"0º","offer_id":51626177757521,"sku":"010-02867-00","price":367.76,"currency_code":"EUR","in_stock":true},{"title":"12º","offer_id":51626177790289,"sku":"010-02867-01","price":367.76,"currency_code":"EUR","in_stock":true},{"title":"20º","offer_id":51626177823057,"sku":"010-02867-02","price":367.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gt12m-thf-gt12m-thf-hr-1000.png?v=1754730404","url":"https:\/\/www.sailrace.com\/en-caucasus\/products\/garmin-gt12-m-thf","provider":"SailRACE","version":"1.0","type":"link"}