{"product_id":"garmin-reactor-40-cable-steering-corepack-for-yamaha-helm-master-with-autopilot","title":"Garmin Reactor 40 cable steering corepack for Yamaha Helm Master With autopilot","description":"\u003cp\u003eCompatibility with corepack\u003c\/p\u003e \u003cp\u003eThis corepack works with yachts that have a Yamaha Helm Master system and requires a compatible Garmin plotter.\u003c\/p\u003e \u003cp\u003eAhrs of 9-AXIS solid state\u003c\/p\u003e \u003cp\u003eThe advanced 9-axis solid-state AHRS system allows you to install the Reactor 40 unit in virtually anywhere and orientation. It even reduces energy consumption, minimizes course errors and much more.\u003c\/p\u003e \u003cp\u003eAbility to react to water conditions\u003c\/p\u003e \u003cp\u003eKeep the course at sea: this autopilot reacts to the conditions, so you can maintain peace of mind even when nooing or rocking movements occur.\u003c\/p\u003e \u003cp\u003eSimple calibration\u003c\/p\u003e \u003cp\u003eAll automatic pilots require a commissioning and calibration process. Reactor 40 makes it quick and easy.\u003c\/p\u003e \u003cp\u003eWireless remote functions\u003c\/p\u003e \u003cp\u003eControl the autopilot from anywhere on the boat using your compatible Garmin devices, including the Reactor autopilot remote control, certain quatix® nautical watches and many more (requires a compatible Garmin plotter or a GHC 50 autopilot instrument).\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=91e8de7007f1012ac7831394c1f0d6b927da74fd0ecebbf8e4a3fe48b68d95cc --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eCan I manually run configuration steps outside the wizards?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, on a helm control or compatible chartplotter, you can run compass calibration, autotune, or define north from the installation setup menu.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do I perform the Dockside Wizard if no helm control is included?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIf there's no helm control, use a compatible chartplotter on the same NMEA 2000 network as the autopilot CCU to run the Dockside Wizard.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWho should install the autopilot system?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe system should be installed by a qualified marine installer with specific knowledge of marine steering and electrical systems.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the Dockside Wizard be run with the boat out of water?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYou can complete the Dockside Wizard while the boat is in or out of the water. If the boat is in the water, it must be stationary.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do I select the speed source for the autopilot?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eSelect Tach. - N2K or Proprietary if RPM data is available over NMEA 2000. If not available, select GPS as a speed source. If neither is available, select None.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow is the autopilot compass calibrated?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eCalibrate the compass during the Sea Trial Wizard or via the Compass Setup, keeping the boat steady and balanced. If calibration is unsuccessful, repeat or relocate the unit.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do I test autopilot performance after setup?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTest at low speed with heading hold engaged, checking for oscillations or sluggish\/misbehaving turns. Fine-tune using gain and acceleration limiter adjustments if needed.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do I verify and correct settings after Dockside Wizard?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eReview all values displayed at the end of the Dockside Wizard and individually correct any errors before finishing the setup.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Can I manually run configuration steps outside the wizards?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, on a helm control or compatible chartplotter, you can run compass calibration, autotune, or define north from the installation setup menu.\"}}, {\"@type\": \"Question\", \"name\": \"How do I perform the Dockside Wizard if no helm control is included?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If there's no helm control, use a compatible chartplotter on the same NMEA 2000 network as the autopilot CCU to run the Dockside Wizard.\"}}, {\"@type\": \"Question\", \"name\": \"Who should install the autopilot system?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The system should be installed by a qualified marine installer with specific knowledge of marine steering and electrical systems.\"}}, {\"@type\": \"Question\", \"name\": \"Can the Dockside Wizard be run with the boat out of water?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"You can complete the Dockside Wizard while the boat is in or out of the water. If the boat is in the water, it must be stationary.\"}}, {\"@type\": \"Question\", \"name\": \"How do I select the speed source for the autopilot?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Select Tach. - N2K or Proprietary if RPM data is available over NMEA 2000. If not available, select GPS as a speed source. If neither is available, select None.\"}}, {\"@type\": \"Question\", \"name\": \"How is the autopilot compass calibrated?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Calibrate the compass during the Sea Trial Wizard or via the Compass Setup, keeping the boat steady and balanced. If calibration is unsuccessful, repeat or relocate the unit.\"}}, {\"@type\": \"Question\", \"name\": \"How do I test autopilot performance after setup?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Test at low speed with heading hold engaged, checking for oscillations or sluggish\/misbehaving turns. Fine-tune using gain and acceleration limiter adjustments if needed.\"}}, {\"@type\": \"Question\", \"name\": \"How do I verify and correct settings after Dockside Wizard?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Review all values displayed at the end of the Dockside Wizard and individually correct any errors before finishing the setup.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626152788305,"sku":"010-02794-04","price":2610.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-reactor-40-cable-steering-corepack-for-yamaha-helm-master-with-autopilot-instrument-ghc-50-reactortm-40-cable-steering-corepack-for-yamaha-helm-master-with-autopilot-instrument_6c5c8fc5-c854-4575-ae45-b403d7bcd4f6.webp?v=1764076000","url":"https:\/\/www.sailrace.com\/en-caucasus\/products\/garmin-reactor-40-cable-steering-corepack-for-yamaha-helm-master-with-autopilot","provider":"SailRACE","version":"1.0","type":"link"}