{"product_id":"garmin-td-50-5-touch-screen","title":"Garmin TD 50, 5\" touch screen","description":"\u003cp\u003eControl at your fingertips\u003c\/p\u003e \u003cp\u003eWhenever you need more access to the on-board system, the 5′′ TD 50 touch screen adapts to your needs. Check the data of the engine and systems or adjust the settings of lighting, air conditioning, entertainment, safety sensors, autopilots and much more.\u003c\/p\u003e \u003cp\u003eScalable technology\u003c\/p\u003e \u003cp\u003eThe touch screen of the TD 50, easy to use and install, can work as an additional screen at the rudder station or to network access the switching and data monitoring functions of the entire boat under deck.\u003c\/p\u003e \u003cp\u003eEasy integration into systems\u003c\/p\u003e \u003cp\u003eTo obtain an integrated digital control on board, the TD 50 touch screen is compatible with NMEA 2000, third-party systems, OneHelm™ EmpirBus and the Garmin network. System connectivity couldn't be simpler.\u003c\/p\u003e \u003cp\u003eIntuitive interface\u003c\/p\u003e \u003cp\u003eThe control by touch screen through a simple graphical interface allows you to access various switching functions and supervision of the electrical components of the entire boat.\u003c\/p\u003e \u003cp\u003eVersatile assembly options\u003c\/p\u003e \u003cp\u003eThe stylized design, the minimum size and the flat or recessed mounting options of the TD 50 unit, allow it to be installed in virtually any location on board where access to the auxiliary system is needed.\u003c\/p\u003e \u003cp\u003eResistant and durable design\u003c\/p\u003e \u003cp\u003eIt has an IPX7 water resistance rating, the touch screen of the TD 50 has been designed for the most demanding nautical environments. The bright LCD screen offers clear and sharp visibility in daylight, adjustable backlight and a wide viewing angle to provide excellent readability anywhere it is used on board.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eMisc\u003c\/td\u003e \u003ctd\u003e \u003ctable style=\"height: 559px;\" width=\"750\"\u003e \u003ccolgroup\u003e \u003ccol width=\"33%\"\u003e \u003ccol width=\"67%\"\u003e \u003c\/colgroup\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd colspan=\"2\"\u003e \u003ch4\u003eDescription\u003c\/h4\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDimensions without the cover for the sun (H. x H. x Pr.)\u003c\/td\u003e \u003ctd\u003e10,5 X 14,0 X 5,1 cm (4,1\" X 4,5\" X 2,0\")\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDimensions with the cover for the sun (H. x H. x D.)\u003c\/td\u003e \u003ctd\u003e11,3 X 14,4 X 5,6 cm (4,5\" X 5,7\" X 2,2\")\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWeight without the cover for the sun\u003c\/td\u003e \u003ctd\u003e328 g (11,6 oz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWeight with the sun cover\u003c\/td\u003e \u003ctd\u003e375 g (13,2 oz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eTemperature range\u003c\/td\u003e \u003ctd\u003eDe -15 a 55 °C (de 5 a 131 °F)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSafety distance of the compass\u003c\/td\u003e \u003ctd\u003e20 cm (7,9\")\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eConstruction of the cables\u003c\/td\u003e \u003ctd\u003eFully sealed polycarbonate\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eLens material\u003c\/td\u003e \u003ctd\u003eGlass with anti-reflective and anti-fingerprint finish\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eClassification of water resistance\u003c\/td\u003e \u003ctd\u003eIPX7\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShine\u003c\/td\u003e \u003ctd\u003e1200 cd\/m2 (nits)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eElectricity consumption\u003c\/td\u003e \u003ctd\u003e5,9 W MáX.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eNMEA 2000® input voltage\u003c\/td\u003e \u003ctd\u003eDe 9 a 16 V de CC\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eLen NMEA 2000 a 9 V de cc\u003c\/td\u003e \u003ctd\u003e13 (650 mA)\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=045d329587c0d8a43504b5b23826093439a8a8e6e469df9806af0d7ffd09729f --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eShould cables be connected before flush mounting the device?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, connect all necessary cables before mounting if access to the back will be blocked after installation.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should I route cables for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eEnsure enough room behind the mounting surface for routing and connecting cables before securing the device.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat gasket steps should be followed during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eInstall the adhesive-backed rubber gasket pieces onto the back of the device after preparing the mounting surface and before placement.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there important safety precautions during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAlways wear safety goggles, ear protection, and a dust mask when drilling or cutting. Disconnect vessel power before starting and ensure proper grounding.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan screws other than those supplied be used for mounting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eNo, only use the included screws. Using other screws may void your warranty and could damage the device.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould the provided mounting template be used?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, use the included mounting template. Printing your own template risks incorrect sizing and may lead to a faulty cutout.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow is the device held securely in place during mounting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eUse the included screws (wood or machine screws, with nut plates if needed) and snap trim caps over the screws once mounted.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs the TD 50 suitable for locations close to magnetic compasses?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eNo, install at least the compass-safe distance away to avoid interference, as stated in the product specifications.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the guidance for installing the gasket pieces?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eInstall the adhesive-backed rubber gasket pieces on the back of the device after removing the protective liner.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhere should the TD 50 be mounted for best performance?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMount at or below eye level on a flat, strong surface. Avoid mounting where exposed to extreme temperatures or excessive vibration\/shock.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there special instructions for cutting the mounting surface?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eBe careful—there's minimal clearance between the case and mounting holes. Cutting too large a hole could compromise stability.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should you prepare the mounting surface for cutting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDrill one or more holes inside the template outline using a 9 mm (3\/8 in.) bit before cutting with a jigsaw or rotary tool.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs standalone operation possible for the TD 50?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eNo, the device will not function as a stand-alone unit; it must be networked with compatible Garmin Marine Network chartplotters.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow is the software updated on the TD 50?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eSoftware updates require either a Garmin memory card reader accessory or another Garmin chartplotter over the Garmin Marine Network.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do you adjust the display backlight?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eSelect the 'Backlight' menu or press the power button repeatedly from any screen to scroll through brightness levels.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow can the display be locked to prevent accidental touches?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eSelect \u0026gt; Lock Touchscreen to lock. Select to unlock the screen when needed.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow is the TD 50 secured when using nut plates?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eNut plates are placed behind the surface, aligned with drilled holes. An M3 pan-head screw fastens each plate for stability.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do you snap the trim caps into place?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAfter securing the device with screws, snap the trim caps into place over the screws as the last step.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Should cables be connected before flush mounting the device?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, connect all necessary cables before mounting if access to the back will be blocked after installation.\"}}, {\"@type\": \"Question\", \"name\": \"How should I route cables for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Ensure enough room behind the mounting surface for routing and connecting cables before securing the device.\"}}, {\"@type\": \"Question\", \"name\": \"What gasket steps should be followed during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Install the adhesive-backed rubber gasket pieces onto the back of the device after preparing the mounting surface and before placement.\"}}, {\"@type\": \"Question\", \"name\": \"Are there important safety precautions during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Always wear safety goggles, ear protection, and a dust mask when drilling or cutting. Disconnect vessel power before starting and ensure proper grounding.\"}}, {\"@type\": \"Question\", \"name\": \"Can screws other than those supplied be used for mounting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, only use the included screws. Using other screws may void your warranty and could damage the device.\"}}, {\"@type\": \"Question\", \"name\": \"Should the provided mounting template be used?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, use the included mounting template. Printing your own template risks incorrect sizing and may lead to a faulty cutout.\"}}, {\"@type\": \"Question\", \"name\": \"How is the device held securely in place during mounting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Use the included screws (wood or machine screws, with nut plates if needed) and snap trim caps over the screws once mounted.\"}}, {\"@type\": \"Question\", \"name\": \"Is the TD 50 suitable for locations close to magnetic compasses?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, install at least the compass-safe distance away to avoid interference, as stated in the product specifications.\"}}, {\"@type\": \"Question\", \"name\": \"What is the guidance for installing the gasket pieces?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Install the adhesive-backed rubber gasket pieces on the back of the device after removing the protective liner.\"}}, {\"@type\": \"Question\", \"name\": \"Where should the TD 50 be mounted for best performance?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Mount at or below eye level on a flat, strong surface. Avoid mounting where exposed to extreme temperatures or excessive vibration\/shock.\"}}, {\"@type\": \"Question\", \"name\": \"Are there special instructions for cutting the mounting surface?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Be careful—there's minimal clearance between the case and mounting holes. Cutting too large a hole could compromise stability.\"}}, {\"@type\": \"Question\", \"name\": \"How should you prepare the mounting surface for cutting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Drill one or more holes inside the template outline using a 9 mm (3\/8 in.) bit before cutting with a jigsaw or rotary tool.\"}}, {\"@type\": \"Question\", \"name\": \"Is standalone operation possible for the TD 50?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, the device will not function as a stand-alone unit; it must be networked with compatible Garmin Marine Network chartplotters.\"}}, {\"@type\": \"Question\", \"name\": \"How is the software updated on the TD 50?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Software updates require either a Garmin memory card reader accessory or another Garmin chartplotter over the Garmin Marine Network.\"}}, {\"@type\": \"Question\", \"name\": \"How do you adjust the display backlight?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Select the 'Backlight' menu or press the power button repeatedly from any screen to scroll through brightness levels.\"}}, {\"@type\": \"Question\", \"name\": \"How can the display be locked to prevent accidental touches?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Select \u003e Lock Touchscreen to lock. Select to unlock the screen when needed.\"}}, {\"@type\": \"Question\", \"name\": \"How is the TD 50 secured when using nut plates?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Nut plates are placed behind the surface, aligned with drilled holes. An M3 pan-head screw fastens each plate for stability.\"}}, {\"@type\": \"Question\", \"name\": \"How do you snap the trim caps into place?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"After securing the device with screws, snap the trim caps into place over the screws as the last step.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626142695761,"sku":"010-02139-10","price":506.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-td-50-5-touch-screen-td50-oem-hr-1005.png?v=1754729586","url":"https:\/\/www.sailrace.com\/en-caucasus\/products\/garmin-td-50-5-touch-screen","provider":"SailRACE","version":"1.0","type":"link"}