{"product_id":"lumishore-eclipse-neonflx-tpbnd-snl100-rgb","title":"Lumishore ECLIPSE NeonFlx - TpBnd-SNL100-RGB","description":"\u003cp\u003eECLISPE NeonFlx - TpBnd-SNL100-RGB-650mm\u003c\/p\u003e \u003cp\u003eECLISPE NeonFlx - TpBnd-SNL100-RGB-650mm,LS, (60-0577-0650)\u003c\/p\u003e\u003c!-- sr-faq v=1 vendor=lumishore source_sha256=82e7a922cd350bcc133e7b1381619e31a52388f8257b5e316e87b4eee3a57b79 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWhat should be done with the boat’s power source before installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDisconnect or isolate the vessel’s power source and battery before starting installation.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat’s the minimum bend radius for this Neon Flex?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe installation guide specifies a minimum bend radius of 120mm (4.724in). Avoid tighter bends to prevent damage during installation.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do I know when the Neon Flex is fully seated in a mounting clip?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAfter the clips are installed, push the Neon Flex into place; a noticeable “Click” indicates it is secure.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eFor dual-color switch wiring, where does the switch connect?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eFor the dual-color switch connection, the note states the switch connects to the negative wires of the Neon Flex.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the stated warranty period?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe datasheet lists a 3-year warranty period.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy coil the Neon Flex back onto the reel during sealing?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eCoiling it back onto the reel retracts the PCB into the extrusion so the end cap can be fitted correctly.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow much sponge cord is used before sealing, and what’s its purpose?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eCut a 4mm piece of sponge cord and place it inside the cavity; it prevents sealant from touching the LEDs (which may cause color shift).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the cut be made at a cut point?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMake a single cutting motion in the center of the cut point.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow full should the end caps be with silicone adhesive?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eFill the blanking end cap and the cable exit end cap “1\/3 of the way up” with the supplied silicone adhesive.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould I test-fit the Neon Flex before cutting it?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes. Lumishore recommends “offering up” (test-fitting) before cutting to ensure you’ve marked the correct length and cut point.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do I wipe away excess adhesive after fitting an end cap?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eWipe away any excess adhesive using water only, then dry with a paper towel before leaving it to cure.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003c!-- \/sr-faq --\u003e","brand":"Lumishore","offers":[{"title":"650 mm","offer_id":53131984404817,"sku":"010-04628-00","price":47.8,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/ELIPSE-Neon-Flex_16746c48-57e6-4abb-a42c-bc9d64c73eb2.png?v=1772043838","url":"https:\/\/www.sailrace.com\/en-caucasus\/products\/lumishore-eclipse-neonflx-tpbnd-snl100-rgb","provider":"SailRACE","version":"1.0","type":"link"}