{"product_id":"garmin-gt17-m-thf-0-degrees","title":"Garmin GT17 m-THF 0 Degrees","description":"\u003cp\u003eDesigned for reduced drag and optimum sonar performance on fishing and cruising boats, this flush-mounted 1 kW midband CHIRP (80–165 kHz) transducer clearly defines fish arches, structure and bottom depth returns on your display.\u003c\/p\u003e\n\u003cp\u003eMidband CHIRP traditional sonar\u003c\/p\u003e\n\u003cp class=\"app__feature__card__description app__feature__card__description--left\"\u003eThis 8-pin 1 kW stainless steel thru-hull transducer features high-definition midband CHIRP sonar that clearly defines fish targets and structure down to 1,800’ in saltwater and 2,400’ in freshwater.\u003c\/p\u003e\n\u003cp\u003eBroad frequency range\u003c\/p\u003e\n\u003cp class=\"app__feature__card__description app__feature__card__description--left\"\u003eUse the perfect frequency for the waters you’re fishing. Covering the medium frequency range, this transducer pulses from 80–165 kHz, displaying a wide coverage area, clear fish arches and accurate depth readings.\u003c\/p\u003e\n\u003cp\u003eOptimum ping sensitivity\u003c\/p\u003e\n\u003cp class=\"app__feature__card__description app__feature__card__description--left\"\u003eOffering excellent sonar sensitivity, low noise, high resolution and good separation of targets, this robust transducer makes it easier than ever to distinguish fish and structure on your compatible chartplotter display.\u003c\/p\u003e\n\u003cdiv class=\"app__feature__card\" data-translate=\"\"\u003e\n\u003cp\u003eTHRU-HULL Installation\u003c\/p\u003e\n\u003cp class=\"app__feature__card__description app__feature__card__description--left\"\u003eA durable stainless steel housing and stem offer straightforward thru-hull flush mounting for minimum drag and optimum beam orientation for clear sonar returns.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"app__feature__card\" data-translate=\"\"\u003e\n\u003cp\u003eAUTO-ID Technology\u003c\/p\u003e\n\u003cp class=\"app__feature__card__description app__feature__card__description--left\"\u003eEnjoy simple plug-and-play operation with Garmin auto-identification technology — which enables the sonar to automatically configure itself to the transducer being used.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"app__feature__card\" data-translate=\"\"\u003e\n\u003cp\u003eFits various hull types\u003c\/p\u003e\n\u003cp class=\"app__feature__card__description app__feature__card__description--left\"\u003eConfigurable for a wide variety of boat hull materials, including fiberglass, composite, steel, aluminum and wood, the transducer is available in a range of tilt versions to accommodate deadrise angles of 0-24 degrees without a fairing block.\u003c\/p\u003e\n\u003ch3\u003eContent:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGT17M-THF transducer\u003c\/li\u003e\n\u003cli\u003eJam nut\u003c\/li\u003e\n\u003cli\u003eSpacer\u003c\/li\u003e\n\u003cli\u003e2 washers\u003c\/li\u003e\n\u003cli\u003e2 set screws\u003c\/li\u003e\n\u003cli\u003eThread isolator\u003c\/li\u003e\n\u003cli\u003eHull isolator\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr class=\"title\"\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003ch4 style=\"text-align: center;\"\u003eGeneral\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTransducer frequency\u003c\/th\u003e\n\u003ctd\u003eMedium band CHIRP (80-165 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTransducer power\u003c\/th\u003e\n\u003ctd\u003e1 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTransducer beamwidth\u003c\/th\u003e\n\u003ctd\u003e9°-18°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTransducer maximum depth\u003c\/th\u003e\n\u003ctd\u003e1800 ft saltwater; 2400 ft freshwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRapidReturn\u003csup class=\"tm-symbol\"\u003e™\u003c\/sup\u003e sonar compatible\u003c\/th\u003e\n\u003ctd class=\"yes\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTransducer cable length\u003c\/th\u003e\n\u003ctd\u003e50 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTransducer depth\/speed\/temperature\u003c\/th\u003e\n\u003ctd\u003eDepth, temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTransducer number of pins\u003c\/th\u003e\n\u003ctd\u003e8-pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTransducer supported deadrise\/transom angles\u003c\/th\u003e\n\u003ctd\u003e0° supports hull deadrise angles from 0° to 7°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHousing material\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=20dceb9046789782037f255edb56fd75a29082629994030fd28784def48503f2 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eAre special components needed for metal hull installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, for aluminum or steel hulls, you must use the included galvanic isolation components as instructed.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow can I prepare a cored-fiberglass hull for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYou must drill a pilot hole, cut the transducer hole, and seal the core with fiberglass or casting epoxy.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should you test for leaks after installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eCheck for leaks around any screw holes before leaving the boat in the water for extended periods.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs software updating required when installing the transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, you must update the Garmin chartplotter software when you install this device.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould the transducer be mounted parallel to the boat's centerline?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, the transducer should be mounted parallel to the bow-stern axis of your vessel.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the transducer cable be routed?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eRoute the cable away from other wiring and engines, avoid pinching, use grommets for bulkheads, and secure with zip ties without over-tightening.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat precautions should be taken when drilling into the hull?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAlways check what's on the opposite side before drilling, and wear safety goggles, ear protection, and a dust mask.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the transducer be operated out of the water?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eNo, always operate the transducer when it is submerged. Operating in air may cause overheating and damage.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should you do if the cable is not long enough?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIf the cable is too short, you can purchase an extension cable from your Garmin dealer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat cleaning products can be used on the transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eClean with a soft cloth and mild detergent. Do not use solvents, power sanders, or pressure washers.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould you use the cable to lift the transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eNo, do not use the cable to pick up or pull the transducer, to prevent damage.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Are special components needed for metal hull installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, for aluminum or steel hulls, you must use the included galvanic isolation components as instructed.\"}}, {\"@type\": \"Question\", \"name\": \"How can I prepare a cored-fiberglass hull for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"You must drill a pilot hole, cut the transducer hole, and seal the core with fiberglass or casting epoxy.\"}}, {\"@type\": \"Question\", \"name\": \"How should you test for leaks after installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Check for leaks around any screw holes before leaving the boat in the water for extended periods.\"}}, {\"@type\": \"Question\", \"name\": \"Is software updating required when installing the transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, you must update the Garmin chartplotter software when you install this device.\"}}, {\"@type\": \"Question\", \"name\": \"Should the transducer be mounted parallel to the boat's centerline?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, the transducer should be mounted parallel to the bow-stern axis of your vessel.\"}}, {\"@type\": \"Question\", \"name\": \"How should the transducer cable be routed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Route the cable away from other wiring and engines, avoid pinching, use grommets for bulkheads, and secure with zip ties without over-tightening.\"}}, {\"@type\": \"Question\", \"name\": \"What precautions should be taken when drilling into the hull?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Always check what's on the opposite side before drilling, and wear safety goggles, ear protection, and a dust mask.\"}}, {\"@type\": \"Question\", \"name\": \"Can the transducer be operated out of the water?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, always operate the transducer when it is submerged. Operating in air may cause overheating and damage.\"}}, {\"@type\": \"Question\", \"name\": \"What should you do if the cable is not long enough?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If the cable is too short, you can purchase an extension cable from your Garmin dealer.\"}}, {\"@type\": \"Question\", \"name\": \"What cleaning products can be used on the transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Clean with a soft cloth and mild detergent. Do not use solvents, power sanders, or pressure washers.\"}}, {\"@type\": \"Question\", \"name\": \"Should you use the cable to lift the transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, do not use the cable to pick up or pull the transducer, to prevent damage.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626207478097,"sku":"010-02930-00","price":5471.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/1-154.jpg?v=1754731101","url":"https:\/\/www.sailrace.com\/en-me\/products\/garmin-gt17-m-thf-0-degrees","provider":"SailRACE","version":"1.0","type":"link"}