{"title":"Garmin Antennas \u0026 Sensors","description":"\u003cp\u003e\u003cspan\u003eWherever you are on the water, there are Garmin antennas and sensors available to keep you in the know and on course. These include GPS\/GLONASS antennas, marine heading sensors and even antennas for weather information and entertainment.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"garmin-24xd-gps-receiver-and-antenna-for-the-nmea2000-network","title":"Garmin 24xd GPS receiver and antenna, for the NMEA2000 network","description":"\u003cdiv class=\"app__column-layout app__column-layout__column--3\"\u003e\n\u003cdiv class=\"app__feature__card\" data-translate=\"\"\u003e\n\u003ch4 class=\"app__feature__card__title light left\" data-v-7cb7910e=\"\" data-test=\"gc__heading\"\u003eGNSS Multibanda\u003c\/h4\u003e\n\u003cp\u003eThe multi-band GNSS gives you a precise location1 within the 1-meter radius with nautical multifunction screens, instrument displays and compatible autopilots.\u003c\/p\u003e\n\u003cp\u003eMagnetic course\u003c\/p\u003e\n\u003cp\u003eThe magnetic course sensor provides an accuracy of up to 3 degrees, card stabilization, radar overlay and MARPA even at low speeds.\u003c\/p\u003e\n\u003cp\u003eHigh sensitivity GPS\u003c\/p\u003e\n\u003cp\u003eThe fast frequencies of 10 Hz position updates provide high-sensitivity position, speed and time data.\u003c\/p\u003e\n\u003cp\u003eExtended GNSS compatibility\u003c\/p\u003e\n\u003cp\u003eGPS 24xd provides access to four key global satellite navigation systems (GPS, Galileo2, GLONASS and BeiDou2) to perform more accurate tracking in demanding conditions than if only GPS is used.\u003c\/p\u003e\n\u003cp\u003eCompatible with several sbas\u003c\/p\u003e\n\u003cp\u003eMulti-SBAS compatibility corrects signal measurement errors and provides information about the accuracy, integrity, continuity and availability of your signals.\u003c\/p\u003e\n\u003cp\u003eAssembly options\u003c\/p\u003e\n\u003cp\u003eThe installation is simple thanks to the mounting options under deck, on the post and on the surface.\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDimensions (D X H): \u003c\/b\u003e91.6 X 49.5 mm (3 19\/32′′ X 1 15\/16′′)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #333333;\"\u003eWeight: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"color: #333333;\"\u003e201 g (7.1 oz)\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"color: #333333;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #333333;\"\u003eCable length: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"color: #333333;\"\u003e6 m (19 ft 8′′)\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"color: #333333;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #333333;\"\u003eTemperature range: f\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"color: #333333;\"\u003erom -30 to 80 °C (from -22 to 176 °F), blank; from -30 to 65 °C (from -22 to 149 °F), in black\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"color: #333333;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #333333;\"\u003e\u003cstrong\u003eCase material:\u003c\/strong\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"color: #333333;\"\u003ef\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"color: #333333;\"\u003eully sealed plastic alloy with high impact resistance, water resistant in accordance with IPX7 standards\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"color: #333333;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #333333;\"\u003eSafety distance from the compass: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"color: #333333;\"\u003e150 mm (5.9′′)\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"color: #333333;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #333333;\"\u003ePower supply: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"color: #333333;\"\u003eFrom 9 to 32 V DC\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"color: #333333;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #333333;\"\u003ePower outlet:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"color: #333333;\"\u003e from 150 mA to 12 V DC\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"color: #333333;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #333333;\"\u003eLoad equivalence number (LEN) NMEA 2000: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"color: #333333;\"\u003e3 (150 mA)\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"color: #333333;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #333333;\"\u003ePositioning accuracy, typical nautical use: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"color: #333333;\"\u003e\u0026lt; 1 m Cep, \u0026lt; 3 m, 95%\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=0f5e7c86923cf13e1bb0ab1067747edec7bef5cf7ba6425fddc2ba5ecfc0c787 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eIs marine sealant needed during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eFilling gaps with marine sealant is optional, especially when routing the cable in the pole-mount slot.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan mounting screws other than those provided be used?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, but test all hardware with a compass to ensure no magnetic fields are present before installing.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the cable be routed through the mounting pole?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, the cable can be routed either outside or through a drilled hole in the mounting pole as described in the instructions.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs the GPS 24xd suitable for under-deck mounting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, but under-deck mounting is only allowed under a fiberglass surface. The under-deck mounting kit is supplied with the white antenna models only.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do you verify if a mounting location is free of magnetic interference?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTest with a handheld compass: if the needle moves in your chosen spot with all equipment powered, relocate and retest.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat type of fasteners should be used when mounting on fiberglass?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA countersink bit is recommended to drill a clearance counterbore through only the top gel-coat to avoid cracking when tightening screws.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat guidelines should be followed when selecting the mounting location?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eChoose a site with unobstructed sky view, away from EMI sources, ferrous metal, radar paths, and VHF antennas.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do you connect the antenna to the NMEA 2000 network?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eConnect the antenna using the provided NMEA 2000 T-connector and drop cable.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the cable be routed to avoid signal issues?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eRoute the cable away from sources of electronic interference for the best signal quality.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Is marine sealant needed during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Filling gaps with marine sealant is optional, especially when routing the cable in the pole-mount slot.\"}}, {\"@type\": \"Question\", \"name\": \"Can mounting screws other than those provided be used?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, but test all hardware with a compass to ensure no magnetic fields are present before installing.\"}}, {\"@type\": \"Question\", \"name\": \"Can the cable be routed through the mounting pole?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, the cable can be routed either outside or through a drilled hole in the mounting pole as described in the instructions.\"}}, {\"@type\": \"Question\", \"name\": \"Is the GPS 24xd suitable for under-deck mounting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, but under-deck mounting is only allowed under a fiberglass surface. The under-deck mounting kit is supplied with the white antenna models only.\"}}, {\"@type\": \"Question\", \"name\": \"How do you verify if a mounting location is free of magnetic interference?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Test with a handheld compass: if the needle moves in your chosen spot with all equipment powered, relocate and retest.\"}}, {\"@type\": \"Question\", \"name\": \"What type of fasteners should be used when mounting on fiberglass?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A countersink bit is recommended to drill a clearance counterbore through only the top gel-coat to avoid cracking when tightening screws.\"}}, {\"@type\": \"Question\", \"name\": \"What guidelines should be followed when selecting the mounting location?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Choose a site with unobstructed sky view, away from EMI sources, ferrous metal, radar paths, and VHF antennas.\"}}, {\"@type\": \"Question\", \"name\": \"How do you connect the antenna to the NMEA 2000 network?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Connect the antenna using the provided NMEA 2000 T-connector and drop cable.\"}}, {\"@type\": \"Question\", \"name\": \"How should the cable be routed to avoid signal issues?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Route the cable away from sources of electronic interference for the best signal quality.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Black \/ Garmin","offer_id":51626042098001,"sku":"010-02316-20","price":329.29,"currency_code":"EUR","in_stock":true},{"title":"White \/ Garmin","offer_id":51626042130769,"sku":"010-02316-10","price":283.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/24xd-gps-receiver-and-antenna-for-the-nmea-2000-network-010-01010-10-hr-066-scaled.webp?v=1754728932"},{"product_id":"garmin-closed-satellite-television-antenna-gtv5","title":"Garmin Closed satellite television antenna GTV5","description":"\u003cp\u003e\u003cstrong\u003eEnjoy the reception of satellite television that few systems are able to offer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis 45 cm (18\") diameter antenna incorporates the patented KVH® RingFire™ technology, which offers more intense signals, greater geographical coverage and better reception\u003c\/li\u003e\n\u003cli\u003eIt is compatible with DIRECTV® U.S., DISH Network®, Bell TV, Sky Mexico, Sky Italia, Sky UK and circular and linear Ku band services from around the world\u003c\/li\u003e\n\u003cli\u003eSupports the installation of several receivers\u003c\/li\u003e\n\u003cli\u003eLow elevation angle for improved tracking in northern latitudes\u003c\/li\u003e\n\u003cli\u003eLNB Quad universal linear configuration that offers optional built-in GPS and automatic skew\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith a reception 30% higher than other 45 cm (18\") systems, you will enjoy a satellite television reception that few are able to offer. Our GTV5 satellite television antenna, with KVH technology and available as part of the Garmin Bridge set, offers exceptional high-performance tracking and reception, as well as compatibility with DIRECTV U.S., DISH Network, Bell TV, Sky Mexico, Sky Italia, Sky UK and circular and linear Ku band services from around the world. This sturdy system is ideal for sport fishing boats or for crossings on the high seas or on the islands.\u003c\/p\u003e\n\u003cp\u003eThanks to the advanced technology of KVH, a leader in nautical satellite television systems, GTV5 offers a fast and stable satellite signal acquisition regardless of sea conditions, which guarantees excellent performance. For greater ease of use, KVH offers a sophisticated, as well as simple technology, which includes the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Tv-Hub, a sophisticated IP-enabled antenna control unit, enables the automatic switching of the satellite\u003c\/li\u003e\n\u003cli\u003eThe intuitive interface provides an assistant for simple installation and configuration, in addition to making system information available to you from any smartphone, tablet, smart TV or computer\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626147512657,"sku":"010-02123-00","price":6638.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-closed-satellite-television-antenna-gtv5-gtv5-hr-12897.png?v=1754729719"},{"product_id":"garmin-closed-satellite-television-antenna-gtv6","title":"Garmin Closed satellite television antenna GTV6","description":"\u003cp\u003e\u003cstrong\u003eEnjoy your favorite TV shows on the high seas\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis high-efficiency antenna of 60 cm in diameter (24\") incorporates the patented KVH® RingFire™ technology, which offers more intense signals, greater geographical coverage and better reception\u003c\/li\u003e\n\u003cli\u003eIt is compatible with DIRECTV® U.S., DISH Network®, Bell TV, Sky Mexico, Sky Italia, Sky UK and circular and linear Ku band services from around the world\u003c\/li\u003e\n\u003cli\u003eSupports the installation of several receivers\u003c\/li\u003e\n\u003cli\u003eUniversal linear Quad LNB configuration that offers built-in GPS and automatic skew\u003c\/li\u003e\n\u003cli\u003eThe sophisticated TV-Hub, enabled for IP, offers simple configuration and operation, in addition to an intuitive user interface to consult system information from any smartphone, tablet, smart TV or computer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to the IP-enabled TV-Hub, the intuitive interface and the single cable installation, our GTV6 satellite TV antenna, with KVH technology and available as part of the Garmin Bridge set, makes it easier than ever to enjoy your favorite TV programs no matter where your adventures on the high seas take you. This 60 cm (24\") nautical satellite television antenna not only offers access to satellite TV services around the world; it also supports the installation of multiple receivers so that all passengers on board can enjoy Your favorite programs. Designed to obtain a wider coverage area, this compatible DVB®-S2 system adapts perfectly to boats that make voyages on the high seas, whether short or long.\u003c\/p\u003e\n\u003cp\u003eWith the advanced technology of KVH, a leader in nautical satellite television systems, GTV6 is a versatile system compatible with DIRECTV U.S., DISH Network, Bell TV, Sky Mexico, Sky Italia, Sky UK and circular and linear Ku band services from around the world. This technology offers the latest advances, including the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTV-Hub, a sophisticated IP-enabled unit that is installed under cover with a simple user interface that offers system information from any computer or mobile device with Wi-Fi® technology.\u003c\/li\u003e\n\u003cli\u003eExclusive RingFire antenna technology, which offers more intense signals, greater geographical coverage and better reception\u003c\/li\u003e\n\u003cli\u003eAdvanced search stabilized and based on inertia that allows a rapid acquisition of the satellite\u003c\/li\u003e\n\u003cli\u003eHigh-performance tracking with advanced algorithms for a clear television image in thick sea conditions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626147545425,"sku":"010-02124-00","price":7576.04,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-closed-satellite-television-antenna-gtv5-gtv5-hr-12897_e8c33a84-d702-420b-b354-855bfd4ec252.png?v=1754729722"},{"product_id":"garmin-msc-10-nautical-compass","title":"Garmin MSC 10, Nautical compass","description":"\u003cp\u003eMULTI-BAND and MULTI-CONSTELLATION GNSS\u003c\/p\u003e\n\u003cp\u003eThe multi-band GNSS (GPS L1 and L5) and multi-constellation (GPS, Galileo, GLONASS and BeiDou) receiver provides precise positioning1.\u003c\/p\u003e\n\u003cp\u003eArfada of the boat and much more\u003c\/p\u003e\n\u003cp\u003eGet reliable and accurate information about the boat's pitch, pitching and swinging, even in irregular waters.\u003c\/p\u003e\n\u003cp\u003eIntegrated direction and position reference system (ahrs)\u003c\/p\u003e\n\u003cp\u003eWith a fully integrated course and position reference system to improve the GPS course at any speed, including heading in rough seas, when making closed turns or with the boat stopped.\u003c\/p\u003e\n\u003cp\u003eAccurate route data\u003c\/p\u003e\n\u003cp\u003eSeveral receivers provide course accuracy within a 2-degree radius. Since it uses satellite signals, you won't have to worry about magnetic interference.\u003c\/p\u003e\n\u003cp\u003eMain sensor in several systems\u003c\/p\u003e\n\u003cp\u003eYou can use the MSC 10 compass as the main sensor for autopilots and other on-board systems that require accurate course information.\u003c\/p\u003e\n\u003cp\u003eCompatibility with the NMEA 2000® network\u003c\/p\u003e\n\u003cp\u003eGet information about heading, anchoring, swinging and swaying directly on your compatible Garmin plotter through the NMEA 2000 network.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (W. X P. X H.): 155.5 X 333.6 X 76.2 mm (6.1′′ X 13.1′′ X 3.0′′)\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #333333;\"\u003eWeight: 810 g (28.6 oz)\u003c\/span\u003e\u003cspan style=\"color: #333333;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #333333;\"\u003eCable length: 6 m (19 feet 8 inches)\u003c\/span\u003e\u003cspan style=\"color: #333333;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #333333;\"\u003eTemperature range (white): from -30 °C to 80 °C (from -22 °F to 176 °F)\u003c\/span\u003e\u003cspan style=\"color: #333333;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #333333;\"\u003eTemperature range (black): from -30 °C to 70 °C (from -22 °F to 158 °F)\u003c\/span\u003e\u003cspan style=\"color: #333333;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #333333;\"\u003eHousing material: plastic alloy sealed with glue and high impact resistance, waterproof according to IPX7 standards\u003c\/span\u003e\u003cspan style=\"color: #333333;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #333333;\"\u003eSafety distance of the compass: 0 mm (0′′)\u003c\/span\u003e\u003cspan style=\"color: #333333;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #333333;\"\u003ePower supply: from 9 to 32 V DC, irregular\u003c\/span\u003e\u003cspan style=\"color: #333333;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #333333;\"\u003ePower outlet: from 180 mA to 12 V DC\u003c\/span\u003e\u003cspan style=\"color: #333333;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #333333;\"\u003eLoad equivalence number (LEN) of NMEA 2000: 6 (300 mA Max.)\u003c\/span\u003e\u003cspan style=\"color: #333333;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #333333;\"\u003ePosition accuracy, typical nautical use: \u0026lt;1 meter Cep, \u0026lt;3 meters 95%\u003c\/span\u003e\u003cspan style=\"color: #333333;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #333333;\"\u003eCourse accuracy: 2 RMS\u003c\/span\u003e\u003cspan style=\"color: #333333;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #333333;\"\u003eSharp precision: 8 cm Rms\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=f3d0fe4581341ff2de791d4aec842df3b3326e7dd277250c77372d3986d79a64 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eHow should the cable be routed in pole mounting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe cable can be routed either through the pole or outside of it using the included adapters for flexibility in installation.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do I minimize magnetic interference when mounting the compass?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAvoid mounting near ferrous metals or electromagnetic sources. Test the location and mounting hardware with a handheld compass before installation.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should cable routing be handled during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eRoute the cable through the mount or pole and away from sources of electronic interference for best performance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat surface thicknesses support the included mounting hardware?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe supplied threaded rods can be used on mounting thicknesses of 5 to 30 mm. For thicker surfaces, longer rods are needed.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eUnder what conditions should the magnetic heading data be disabled?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIf you can't install in an ideal magnetic\/GPS location, disable magnetic heading data via a factory reset; only GPS-based heading remains.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat type of pole should be used for pole mounting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eUse a standard stainless steel, 1 in. OD, 14 threads per inch, pipe-threaded pole. This ensures secure mounting and correct heading information.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat network is required for connecting the MSC 10?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA NMEA 2000 network is required. The device is supplied with a T-connector and drop cable for this purpose.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there location restrictions for mounting the MSC 10 compass?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe compass should be mounted with a clear, unobstructed sky view, away from tall structures, cabins, engines, or EMI sources. Avoid shading and radar paths.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the mounting nut be tightened for pole mounting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAfter aligning, finger tighten the nut, then use a 35 mm wrench to turn it 1\/4 turn to secure.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do you clean the MSC 10?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eClean with a cloth dampened with mild detergent. Avoid chemical cleaners and solvents to prevent damage to the outer casing.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do you fine-tune heading alignment?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eFine heading alignment can be adjusted in the NMEA 2000 device list using a known landmark or compass.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"How should the cable be routed in pole mounting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The cable can be routed either through the pole or outside of it using the included adapters for flexibility in installation.\"}}, {\"@type\": \"Question\", \"name\": \"How do I minimize magnetic interference when mounting the compass?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Avoid mounting near ferrous metals or electromagnetic sources. Test the location and mounting hardware with a handheld compass before installation.\"}}, {\"@type\": \"Question\", \"name\": \"How should cable routing be handled during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Route the cable through the mount or pole and away from sources of electronic interference for best performance.\"}}, {\"@type\": \"Question\", \"name\": \"What surface thicknesses support the included mounting hardware?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The supplied threaded rods can be used on mounting thicknesses of 5 to 30 mm. For thicker surfaces, longer rods are needed.\"}}, {\"@type\": \"Question\", \"name\": \"Under what conditions should the magnetic heading data be disabled?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If you can't install in an ideal magnetic\/GPS location, disable magnetic heading data via a factory reset; only GPS-based heading remains.\"}}, {\"@type\": \"Question\", \"name\": \"What type of pole should be used for pole mounting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Use a standard stainless steel, 1 in. OD, 14 threads per inch, pipe-threaded pole. This ensures secure mounting and correct heading information.\"}}, {\"@type\": \"Question\", \"name\": \"What network is required for connecting the MSC 10?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A NMEA 2000 network is required. The device is supplied with a T-connector and drop cable for this purpose.\"}}, {\"@type\": \"Question\", \"name\": \"Are there location restrictions for mounting the MSC 10 compass?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The compass should be mounted with a clear, unobstructed sky view, away from tall structures, cabins, engines, or EMI sources. Avoid shading and radar paths.\"}}, {\"@type\": \"Question\", \"name\": \"How should the mounting nut be tightened for pole mounting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"After aligning, finger tighten the nut, then use a 35 mm wrench to turn it 1\/4 turn to secure.\"}}, {\"@type\": \"Question\", \"name\": \"How do you clean the MSC 10?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Clean with a cloth dampened with mild detergent. Avoid chemical cleaners and solvents to prevent damage to the outer casing.\"}}, {\"@type\": \"Question\", \"name\": \"How do you fine-tune heading alignment?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Fine heading alignment can be adjusted in the NMEA 2000 device list using a known landmark or compass.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Nautical compass, heading sensor and multi-band GPS receiver, white","offer_id":51626147610961,"sku":"010-02407-00","price":933.61,"currency_code":"EUR","in_stock":true},{"title":"Nautical satellite compass MSC™ 10 Course sensor and multiband GPS receiver, black","offer_id":51626147643729,"sku":"010-02407-10","price":978.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-msc-10-nautical-compass-msc10-hr-1007_6bb12897-6a98-4aa0-a802-5c3da799e5d8.png?v=1754729757"},{"product_id":"garmin-gps-24xd-hvs","title":"Garmin GPS 24xd HVS","description":"\u003cp\u003eGNSS Multibanda\u003c\/p\u003e\n\u003cp\u003eThe multi-band GNSS gives you a precise location1 within the 1-meter radius with nautical multifunction screens, instrument displays and compatible autopilots.\u003c\/p\u003e\n\u003cp\u003eMagnetic course\u003c\/p\u003e\n\u003cp\u003eThe magnetic course sensor provides an accuracy of up to 3 degrees, card stabilization, radar overlap and MARPA even at low speeds\u003c\/p\u003e\n\u003cp\u003eHigh sensitivity GPS\u003c\/p\u003e\n\u003cp\u003eThe fast frequencies of 10 Hz position updates provide high-sensitivity position, speed and time data.\u003c\/p\u003e\n\u003cp\u003eExtended GNSS compatibility\u003c\/p\u003e\n\u003cp\u003eGPS 24xd provides access to four key global satellite navigation systems (GPS, Galileo2, GLONASS and BeiDou2) to perform more accurate tracking in demanding conditions than if only GPS is used.\u003c\/p\u003e\n\u003cp\u003eCompatible with several sbas\u003c\/p\u003e\n\u003cp\u003eMulti-SBAS compatibility corrects signal measurement errors and provides information about the accuracy, integrity, continuity and availability of your signals.\u003c\/p\u003e\n\u003cp\u003eAssembly options\u003c\/p\u003e\n\u003cp\u003eThe installation is simple thanks to the mounting options under deck, on the post and on the surface.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (depth X height): 91.6 mm X 49.5 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 201 g\u003c\/li\u003e\n\u003cli\u003eCable length: 6 m\u003c\/li\u003e\n\u003cli\u003eTemperature range: from -30 to 80 °C\u003c\/li\u003e\n\u003cli\u003eCase material: fully sealed plastic alloy with high impact resistance, water resistant in accordance with IPX7 standards\u003c\/li\u003e\n\u003cli\u003eSafety distance from the compass: 150 mm\u003c\/li\u003e\n\u003cli\u003ePower supply: 8-33 V DC, irregular\u003c\/li\u003e\n\u003cli\u003ePower outlet: from 150 mA to 12 V DC\u003c\/li\u003e\n\u003cli\u003ePosition accuracy, typical nautical use: \u0026lt; 50 cm, Cep 50%; \u0026lt; 1 meter, 88%\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=b71099dfad4d52f899d58c62c42c9fc5c5522a6f281dc05db17611696d4b7034 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eIs marine sealant required for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMarine sealant is optional. It can be used to fill any remaining gaps in the cable slot when mounting on a pole, or to seal cable holes where needed.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow can I test the mounting location before permanent installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTemporarily secure the antenna and ensure proper operation. Move and retest as needed to avoid interference or signal loss.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat maintenance does the outer casing require?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eClean with a cloth dampened with mild detergent; avoid chemical cleaners or solvents to prevent damage.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the cable be routed during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eRoute the cable away from sources of electronic interference, such as engines and power lines, for best performance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat type of pole can be used for pole mounting the GPS 24xd HVS?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA standard 1 in. OD, 14 threads per inch, pipe-threaded pole (not included) is required for pole mounting.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow can I limit the antenna's output update rate to 1 Hz?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eSolder the included Update Rate Select (resistor) cable to the orange Accessory on wire. The antenna will then output at 1 Hz.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhere should the antenna be mounted for best GPS performance?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eChoose a location with a clear, unobstructed sky view, away from superstructure, radome, the mast, engines, EMI, and ferrous metals.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow is basic heading calibration performed?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAfter connecting the display, perform two slow, tight circles at least 6.4 km\/h in calm water, and then align heading as needed.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the antenna be mounted with regard to radar and VHF antennas?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDon't mount within 1 meter of a VHF radio antenna or in the radar's path; best above the radar path, never shaded by superstructure.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do I disable magnetic heading data?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDrive the boat in two slow, tight circles after power cycling; remain stationary for 2 minutes to trigger heading disable sequence.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the outer casing of the GPS 24xd HVS be cleaned?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eClean the casing with a cloth dampened by mild detergent solution. Avoid chemical cleaners and solvents to protect plastic components.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Is marine sealant required for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Marine sealant is optional. It can be used to fill any remaining gaps in the cable slot when mounting on a pole, or to seal cable holes where needed.\"}}, {\"@type\": \"Question\", \"name\": \"How can I test the mounting location before permanent installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Temporarily secure the antenna and ensure proper operation. Move and retest as needed to avoid interference or signal loss.\"}}, {\"@type\": \"Question\", \"name\": \"What maintenance does the outer casing require?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Clean with a cloth dampened with mild detergent; avoid chemical cleaners or solvents to prevent damage.\"}}, {\"@type\": \"Question\", \"name\": \"How should the cable be routed during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Route the cable away from sources of electronic interference, such as engines and power lines, for best performance.\"}}, {\"@type\": \"Question\", \"name\": \"What type of pole can be used for pole mounting the GPS 24xd HVS?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A standard 1 in. OD, 14 threads per inch, pipe-threaded pole (not included) is required for pole mounting.\"}}, {\"@type\": \"Question\", \"name\": \"How can I limit the antenna's output update rate to 1 Hz?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Solder the included Update Rate Select (resistor) cable to the orange Accessory on wire. The antenna will then output at 1 Hz.\"}}, {\"@type\": \"Question\", \"name\": \"Where should the antenna be mounted for best GPS performance?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Choose a location with a clear, unobstructed sky view, away from superstructure, radome, the mast, engines, EMI, and ferrous metals.\"}}, {\"@type\": \"Question\", \"name\": \"How is basic heading calibration performed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"After connecting the display, perform two slow, tight circles at least 6.4 km\/h in calm water, and then align heading as needed.\"}}, {\"@type\": \"Question\", \"name\": \"How should the antenna be mounted with regard to radar and VHF antennas?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Don't mount within 1 meter of a VHF radio antenna or in the radar's path; best above the radar path, never shaded by superstructure.\"}}, {\"@type\": \"Question\", \"name\": \"How do I disable magnetic heading data?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Drive the boat in two slow, tight circles after power cycling; remain stationary for 2 minutes to trigger heading disable sequence.\"}}, {\"@type\": \"Question\", \"name\": \"How should the outer casing of the GPS 24xd HVS be cleaned?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Clean the casing with a cloth dampened by mild detergent solution. Avoid chemical cleaners and solvents to protect plastic components.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626147676497,"sku":"010-02316-00","price":283.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gps-24xd-hvs-010-01010-00-hr-031-scaled.jpg?v=1754729729"},{"product_id":"garmin-steadycast-course","title":"Garmin SteadyCast course","description":"\u003cp\u003e\u003cstrong\u003eFind out where you throw the hook\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAllows you to make sure that the bow orientation on the plotter matches the course\u003c\/li\u003e\n\u003cli\u003eAccuracy of the course of plus\/minus 3 degrees\u003c\/li\u003e\n\u003cli\u003eSimple NMEA 2000® plug-and-play interface\u003c\/li\u003e\n\u003cli\u003eSimple two-step calibration process\u003c\/li\u003e\n\u003cli\u003eThe 9-axis MEMS technology allows installation in any orientation, away from magnetic interference\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe SteadyCast heading sensor is a simple and very easy-to-install solution that can be quickly calibrated and provides exceptional course accuracy. Align the bow of the boat with the real orientation, so that, with the help of the plotter screen, you can know where you throw the hook.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecise direction even at low speed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith a heading out frequency of 10 Hz and an accuracy of more\/minus 3 degrees, you can be sure that the orientation of the letter and the heading line of the boat will totally coincide with reality, even at low speed or when being totally still in the water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEffective in coarse sea conditions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can also fully rely on the accuracy of the course information, even in coarse sea conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to install and quick to calibrate\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThanks to the NMEA 2000® plug-and-play interface and a precise and simple two-step calibration process for compatible Garmin plotters, the SteadyCast rumbo sensor is very easy to install. Basic calibration is also supported. It is also available for Garmin echoMAP models and other NMEA 2000 displays. The 9-axis MEMS technology allows installation in any orientation away from electromagnetic interference. Its design allows installation on the benney.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (length X width X height): 86.3 X 52.9 X 33.7 mm\u003c\/li\u003e\n\u003cli\u003eDefault direction information output: 10 Hz\u003c\/li\u003e\n\u003cli\u003eOutput of course information with an accuracy of +\/-3 degrees\u003c\/li\u003e\n\u003cli\u003eWater resistance rating: IPX7\u003c\/li\u003e\n\u003cli\u003eLen: 2\u003c\/li\u003e\n\u003cli\u003eOperating voltage: From 9 V DC to 32 V DC\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=a4fb4761b93b508b17b3e33747d0bed40d4df6671590f4306e0b64be2bb38d69 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eHow should the cable be routed during sensor installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe cable can be routed along the mounting surface or through the mounting surface under the sensor using a 25 mm drill bit for passthrough.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat tools are required for SteadyCast sensor installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYou will need safety glasses, a drill, 3.2mm and 25mm drill bits, a Phillips screwdriver, cable ties, and a portable or handheld compass.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow is calibration performed after installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eCalibration is mandatory and can be done menu-based via chartplotter or basic, depending on NMEA 2000 devices connected.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is a key safety precaution during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAlways wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding. Check for obstructions before drilling.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should I do if installing using non-standard mounting hardware?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIf using your own hardware, ensure it is stainless steel or brass and test it for magnetic interference with a handheld compass.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan SteadyCast be mounted in any orientation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, the sensor can be mounted in any orientation and is not required to be installed in the same horizontal plane as the boat.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is included in the SteadyCast package?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe sensor comes with mounting screws and a NMEA 2000 T-connector; additional screws or cable extensions may be needed.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"How should the cable be routed during sensor installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The cable can be routed along the mounting surface or through the mounting surface under the sensor using a 25 mm drill bit for passthrough.\"}}, {\"@type\": \"Question\", \"name\": \"What tools are required for SteadyCast sensor installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"You will need safety glasses, a drill, 3.2mm and 25mm drill bits, a Phillips screwdriver, cable ties, and a portable or handheld compass.\"}}, {\"@type\": \"Question\", \"name\": \"How is calibration performed after installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Calibration is mandatory and can be done menu-based via chartplotter or basic, depending on NMEA 2000 devices connected.\"}}, {\"@type\": \"Question\", \"name\": \"What is a key safety precaution during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding. Check for obstructions before drilling.\"}}, {\"@type\": \"Question\", \"name\": \"What should I do if installing using non-standard mounting hardware?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If using your own hardware, ensure it is stainless steel or brass and test it for magnetic interference with a handheld compass.\"}}, {\"@type\": \"Question\", \"name\": \"Can SteadyCast be mounted in any orientation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, the sensor can be mounted in any orientation and is not required to be installed in the same horizontal plane as the boat.\"}}, {\"@type\": \"Question\", \"name\": \"What is included in the SteadyCast package?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The sensor comes with mounting screws and a NMEA 2000 T-connector; additional screws or cable extensions may be needed.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626150232401,"sku":"010-11417-10","price":186.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-steadycast-course-sensor-r-010-11417-10-hr-144.png?v=1754729751"},{"product_id":"garmin-gps-and-glonass-ga-38","title":"Garmin GPS and Glonass GA 38","description":"\u003cp\u003eDesigned to take advantage of the GLONASS system or satellite constellations, in addition to the standard GPS, this sturdy outdoor antenna incorporates a water-resistant low-profile housing and provides three simple mounting solutions: pole, surface or under deck (for the bottom of fiberglass covers).\u003c\/p\u003e\n\u003cp\u003eThe external GPS and GLONASS antennas provide greater flexibility and more installation options, as well as the power necessary to achieve better reception of the GPS or GLONASS signal, for products with built-in GPS or GLONASS antennas.\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (Pr. X H.): 91.6 mm X 49.5 mm (3 19\/32′′ X 1 15\/18′′)\u003c\/li\u003e\n\u003cli\u003eWeight: 201 g (7.1 oz)\u003c\/li\u003e\n\u003cli\u003eTemperature range: from -30 °C to 80 °C (from -22 °F to 176 °F)\u003c\/li\u003e\n\u003cli\u003eCase material: fully sealed plastic alloy with high impact resistance, water resistant in accordance with IPX7 standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=0d1d7f50f17d96d425a2d78cc9f9abebda7eb6ba691e4f3228a1cdde21ab9f04 --\u003e\u003ch4\u003eFAQs\u003c\/h4\u003e\u003cdetails\u003e\u003csummary\u003eWhat are the safety recommendations during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAlways wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the required thread specification for pole mounting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe pole must be standard 1 in. OD, 14 threads per inch, pipe-threaded (not included).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat connector type does the GA 38 antenna use?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GA 38 antenna uses a BNC connector to connect to compatible Garmin chartplotters.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the advised compass-safe distance for the antenna?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMaintain at least 114 mm (4.5 in.) between the antenna and any compass.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat are the recommended mounting locations for best signal?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIt should be mounted where there is a clear, unobstructed view of the sky, away from superstructures, radomes, and masts.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat steps are recommended before permanent mounting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTemporarily secure and test the antenna for correct operation to ensure there is no interference.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDoes the antenna support different mounting methods?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, it supports surface, pole, and under-deck (fiberglass only) mounting options.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the GA 38 be mounted under a metal deck?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eNo, the antenna cannot acquire signals through metal and must be mounted under a fiberglass surface only.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What are the safety recommendations during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.\"}}, {\"@type\": \"Question\", \"name\": \"What is the required thread specification for pole mounting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The pole must be standard 1 in. OD, 14 threads per inch, pipe-threaded (not included).\"}}, {\"@type\": \"Question\", \"name\": \"What connector type does the GA 38 antenna use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GA 38 antenna uses a BNC connector to connect to compatible Garmin chartplotters.\"}}, {\"@type\": \"Question\", \"name\": \"What is the advised compass-safe distance for the antenna?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Maintain at least 114 mm (4.5 in.) between the antenna and any compass.\"}}, {\"@type\": \"Question\", \"name\": \"What are the recommended mounting locations for best signal?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It should be mounted where there is a clear, unobstructed view of the sky, away from superstructures, radomes, and masts.\"}}, {\"@type\": \"Question\", \"name\": \"What steps are recommended before permanent mounting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Temporarily secure and test the antenna for correct operation to ensure there is no interference.\"}}, {\"@type\": \"Question\", \"name\": \"Does the antenna support different mounting methods?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, it supports surface, pole, and under-deck (fiberglass only) mounting options.\"}}, {\"@type\": \"Question\", \"name\": \"Can the GA 38 be mounted under a metal deck?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, the antenna cannot acquire signals through metal and must be mounted under a fiberglass surface only.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626158031185,"sku":"010-13305-00","price":106.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gps-and-glonass-ga-38-antenna-for-cortex-v1-and-m1-in-white-010-12017-00-010-13305-00-family-hr-1000.png?v=1754729946"},{"product_id":"garmin-gps-and-glonass-ga-38-antenna-for-vhf-ais-and-plotters-in-white","title":"Garmin GPS and Glonass GA 38 antenna for VHF, AIS and plotters, in white","description":"\u003cp\u003eDesigned to take advantage of the GLONASS system or satellite constellations, in addition to the standard GPS, this sturdy outdoor antenna incorporates a water-resistant low-profile housing and provides three simple mounting solutions: pole, surface or under deck (for the bottom of fiberglass covers).\u003c\/p\u003e\n\u003cp\u003eThe external GPS and GLONASS antennas provide greater flexibility and more installation options, as well as the power necessary to achieve better reception of the GPS or GLONASS signal, for products with built-in GPS or GLONASS antennas.\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (Pr. X H.): 91.6 mm X 49.5 mm (3 19\/32′′ X 1 15\/18′′)\u003c\/li\u003e\n\u003cli\u003eWeight: 201 g (7.1 oz)\u003c\/li\u003e\n\u003cli\u003eTemperature range: from -30 °C to 80 °C (from -22 °F to 176 °F)\u003c\/li\u003e\n\u003cli\u003eCase material: fully sealed plastic alloy with high impact resistance, water resistant in accordance with IPX7 standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=1e9c22017a6a4191a8fcf8452ec2aa21364ba908dd856079011721f7f7e7da7e --\u003e\u003ch4\u003eFAQs\u003c\/h4\u003e\u003cdetails\u003e\u003csummary\u003eWhat connector does the GA 38 antenna use for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GA 38 uses a BNC connector to attach to the ANTENNA or EXT GPS port on compatible Garmin chartplotters.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the cable be routed when using the pole mount adapter?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eCable can be routed outside or through the pole; fill any gap in the cable slot with marine sealant (optional) after installation.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat safety precautions should be followed during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eWear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding. Check the opposite side before drilling\/cutting.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat type of pole is required for pole mounting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA standard 1 in. OD, 14 threads per inch, pipe-threaded pole is required (not included).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat are the recommended steps for surface mounting the GA 38 antenna?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTo surface mount, use the bracket as a template for pilot holes, drill holes, secure the bracket, route the cable, and lock the antenna with the included set screw.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the recommended compass-safe distance for the antenna?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMaintain at least 114 mm (4.5 in.) between the antenna and any compass.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the GA 38 antenna be damaged by magnets?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDo not install or store near strong magnets, including speakers, as a strong magnetic field can damage the antenna.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat mounting options are available for the GA 38 antenna?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYou can mount the GA 38 on a flat surface, on a pole (1 in. OD, 14 threads per inch), or under a fiberglass deck.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What connector does the GA 38 antenna use for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GA 38 uses a BNC connector to attach to the ANTENNA or EXT GPS port on compatible Garmin chartplotters.\"}}, {\"@type\": \"Question\", \"name\": \"How should the cable be routed when using the pole mount adapter?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Cable can be routed outside or through the pole; fill any gap in the cable slot with marine sealant (optional) after installation.\"}}, {\"@type\": \"Question\", \"name\": \"What safety precautions should be followed during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding. Check the opposite side before drilling\/cutting.\"}}, {\"@type\": \"Question\", \"name\": \"What type of pole is required for pole mounting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A standard 1 in. OD, 14 threads per inch, pipe-threaded pole is required (not included).\"}}, {\"@type\": \"Question\", \"name\": \"What are the recommended steps for surface mounting the GA 38 antenna?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"To surface mount, use the bracket as a template for pilot holes, drill holes, secure the bracket, route the cable, and lock the antenna with the included set screw.\"}}, {\"@type\": \"Question\", \"name\": \"What is the recommended compass-safe distance for the antenna?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Maintain at least 114 mm (4.5 in.) between the antenna and any compass.\"}}, {\"@type\": \"Question\", \"name\": \"Can the GA 38 antenna be damaged by magnets?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Do not install or store near strong magnets, including speakers, as a strong magnetic field can damage the antenna.\"}}, {\"@type\": \"Question\", \"name\": \"What mounting options are available for the GA 38 antenna?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"You can mount the GA 38 on a flat surface, on a pole (1 in. OD, 14 threads per inch), or under a fiberglass deck.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626159374673,"sku":"010-12017-00","price":88.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gps-and-glonass-ga-38-antenna-for-vhf-ais-and-garmin-plotters-in-white-010-12017-00-hr-609-scaled.jpg?v=1754730010"},{"product_id":"garmin-gtemp10-th-through-hull-temperature","title":"Garmin GTEMP10-TH Through-Hull Temperature","description":"\u003cp\u003eA simple way to obtain accurate water temperature data\u003cbr\u003e\nAccurately records the temperature of a bait well, a livewell, or the waters where you're fishing\u003cbr\u003e\nFast response and high sensitivity temperature reading from -25 to 60 °C (-13 to 140 °F)\u003cbr\u003e\nAbility to identify devices, such as \"port livewell\" and \"starboard baitwell,\" in multi-installation locations for easy location (this feature is available only on certain devices)\u003cbr\u003e\nRobust mechanical design for easy installation\u003cbr\u003e\nPlug-and-play integration with NMEA 2000® network\u003c\/p\u003e\n\u003cp\u003eFreshwater and saltwater anglers need to keep accurate records of the temperature of bait wells, livewells, and the waters they are fishing in. The GTEMP10-TH is the perfect solution. This through-hull temperature sensor with fast response and high sensitivity provides NMEA 2000 data and can identify the location of each device, such as \"port livewell\" or \"starboard baitwell,\" when used in multiple installations. It features a robust mechanical design for easy installation and is built to withstand even harsh saltwater environments. Its design allows the transducer to be flush-mounted on the vessel with no protruding parts, reducing turbulence in through-hull installations. It easily connects with plug-and-play integration to the NMEA 2000 network.\u003c\/p\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=b5b57442513b51a448f29fb3befa349c2a2383315954d6c3fb48c8a87b89ad0b --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the maximum hull thickness for sensor installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe maximum hull thickness supported for installation is 57 mm (2.25 inches).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat are the installation safety warnings?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eWear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there special mounting considerations for cored-fiberglass hulls?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, you must seal the core properly to prevent water from entering and damaging the boat.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow long is the included sensor cable?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe cable length provided with the unit is 1.8 meters (6 feet).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the power input range for the GTEMP10-TH sensor?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe power input for the GTEMP10-TH sensor is from 9 to 32 Vdc.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the power consumption of this NMEA 2000 sensor?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe sensor consumes 0.24 W (20 mA at 12V).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the operating temperature range for the device?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIt operates from -25 to 80ºC (from -13 to 176°F).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is the maximum hull thickness for sensor installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The maximum hull thickness supported for installation is 57 mm (2.25 inches).\"}}, {\"@type\": \"Question\", \"name\": \"What are the installation safety warnings?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.\"}}, {\"@type\": \"Question\", \"name\": \"Are there special mounting considerations for cored-fiberglass hulls?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, you must seal the core properly to prevent water from entering and damaging the boat.\"}}, {\"@type\": \"Question\", \"name\": \"How long is the included sensor cable?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The cable length provided with the unit is 1.8 meters (6 feet).\"}}, {\"@type\": \"Question\", \"name\": \"What is the power input range for the GTEMP10-TH sensor?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The power input for the GTEMP10-TH sensor is from 9 to 32 Vdc.\"}}, {\"@type\": \"Question\", \"name\": \"What is the power consumption of this NMEA 2000 sensor?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The sensor consumes 0.24 W (20 mA at 12V).\"}}, {\"@type\": \"Question\", \"name\": \"What is the operating temperature range for the device?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It operates from -25 to 80ºC (from -13 to 176°F).\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626182574417,"sku":"010-11413-10","price":123.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/010-11413-10_hr_1676-scaled.jpg?v=1754730572"},{"product_id":"garmin-water-speed-sensor-4-pins","title":"Garmin Water speed sensor (4 pins)","description":"\u003cp\u003eCollect speed data and send it to your echo™ probe with our water sensor.\u003c\/p\u003e\n\u003cp\u003eSimply mount our speed sensor on the transom of your boat and connect it to the device. The paddle wheel on the speed sensor rotates as the boat moves through the water, and the speed data is collected and displayed on the device.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626182607185,"sku":"010-10279-04","price":29.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/010-10279-04_hr_001.jpg?v=1754730575"},{"product_id":"airmar-t80-water-temperature-probe-8-pin","title":"Airmar T80 Water Temperature Probe (8-pin)","description":"\u003cp\u003eUse this Garmin or Airmar temperature probe to add compatible water-temperature sensing to the referenced sonar or instrument installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReference:\u003c\/strong\u003e Sensor de temperatura 8 pines\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned for the matching Garmin or Airmar interface referenced in the title.\u003c\/li\u003e\n\u003cli\u003eUseful when replacing a failed probe or adding a compatible temperature input to the system.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626182934865,"sku":"010-10717-20","price":147.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/cf-lg_763c97e5-e1de-498b-9987-5c824ca5d5aa.jpg?v=1773481429"},{"product_id":"fusion-stealth-antenna","title":"GARMIN Fusion | Stealth Antenna","description":"\u003cp\u003eThis \u003cstrong\u003ecompact antenna\u003c\/strong\u003e connects to your compatible \u003cstrong\u003eFusion marine stereo\u003c\/strong\u003e to enable \u003cstrong\u003eAM\/FM radio reception\u003c\/strong\u003e. Its \u003cstrong\u003e1.8-meter cable\u003c\/strong\u003e allows flexible antenna placement.\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":51626187653457,"sku":"010-12584-00","price":17.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/1-41.jpg?v=1754730736"},{"product_id":"fusion-ms-bt100-bluetooth-module","title":"GARMIN Fusion | MS-BT100 BLUETOOTH Module","description":"\u003cp\u003eConnect this module to your compatible Fusion marine stereo with an RCA AUX input to enable BLUETOOTH wireless connectivity. It features an IP65 rating, integrated protection against voltage spikes and an effective range of 33’ (10 meters).\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical dimensions (WxHxD): 1.65” x 2.32” x 0.59” (42 x 59 x 15 mm)\u003c\/li\u003e\n\u003cli\u003eWater and dust rating: IP65\u003c\/li\u003e\n\u003cli\u003ePower input: 10.8-16 VDC\u003c\/li\u003e\n\u003cli\u003eCurrent (max): 20 mA\u003c\/li\u003e\n\u003cli\u003eBLUETOOTH: A2DP V3.0 Class 2\u003c\/li\u003e\n\u003cli\u003eBLUETOOTH wireless range: Up to 33 ft (10 m)\u003c\/li\u003e\n\u003cli\u003eWireless frequencies\/protocols: BLUETOOTH 2.4 GHz @ +5 dBm maximum\u003c\/li\u003e\n\u003cli\u003eCable length: 5 ft (1.5 m)\u003c\/li\u003e\n\u003cli\u003eCompass-safe distance: 2” (50 mm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":51626187850065,"sku":"MS-BT100","price":44.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/1-44.jpg?v=1754730748"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/collections\/boat-sensors-antennas.webp?v=1768306233","url":"https:\/\/www.sailrace.com\/en-pac\/collections\/garmin-boat-sensors-antennas.oembed?page=2","provider":"SailRACE","version":"1.0","type":"link"}