Harken High-Load Furling System — 5mm Luff Wire

Harken® Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without removing the headstay. Swivels are independent of the headstay, allowing you to tension the luff separately from the mast rake. Pin-to-pin length (mm) 102 mm
Pin-to-pin length (in) 4 in
Drum Ø (mm) 106 mm
Drum Ø (in) 4 3/16 in
Maximum line Ø (mm) 6 mm
Maximum line Ø (in) 1/4 in
Jaw width (mm) 10 mm
Jaw width (in) 3/8 in
Maximum luff wire Ø (mm) 5 mm
Maximum luff wire Ø (in) 3/16 in
Clevis pin Ø (mm) 7.9 mm
Clevis pin Ø (in) 5/16 in
Weight (g) 646 g
Weight (oz) 22.8 oz
Maximum working load (kg) 907 kg
Maximum working load (lb) 2000 lb
Boat length – monohull (m) 6.1 – 7.6 m
Boat length – monohull (ft) 20 – 25 ft
Boat length – multihull (m) 5.5 – 7 m
Boat length – multihull (ft) 18 – 23 ft
Includes upper swivel 207
Includes drum 208
Footnote Includes drum and upper swivel. Does not include hoistable swivel.

Brand	HARKEN
SKU	436
GTIN	097653073567

The following products are from the same Category as this one:

[ywqa_questions]