{"title":"GARMIN SCANNING SONAR TRANSDUCERS","description":"","products":[{"product_id":"garmin-gt30-tm","title":"Garmin GT30-TM","description":"\u003cp\u003eGet ultra-clear probe images of objects, structures and fish passing under your boat thanks to this 12-pin transducer.\u003c\/p\u003e \u003cp\u003eThis 20-foot transducer cable with built-in fast-response temperature sensor has a power of 500 W per element (1500 W in total), a depth of 750 feet (DownVü) and 500 feet to the left and right (SideVü); an operating frequency of 455\/800 kHz (DownVü) and a stern mirror angle of 0 to 70 degrees. Link it with your GCV™ 10 black box probe.\u003c\/p\u003e \u003cp\u003eThe transducer is supplied with the installation instructions. Follow the instructions carefully to avoid damage to the boat.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003ePhysical And Performance Characteristics\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eFrequency\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eClearVü\/SideVü CHIRP 455 kHz (425-485 kHz) \u0026amp; 800 kHz (790-850 kHz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eEnergy\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eClearVü\/SideVü 500 W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eBeam Width\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eClearVü: 1.4°x53° @ 455 kHz \u0026amp; 0.8°x30° @ 800 kHz SideVü: 1.1°x53° @ 455 kHZ \u0026amp; 0.7°x30° @ 800 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eMaximum Depth\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eClearVü: 750 ft.; SideVü: 500 ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eCable Legth\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e20 ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eDepth\/ Speed \/ Temperature\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eDepth and Temperature\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eNumber of sideburns\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e12-pin\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eAft Mirror angles allowed\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e0°-70° degree transom\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=00f716d7ea6799e2246b337129b90eb98a4944938923dea32c3537a657420a7b --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWhat mounting style does the GT30-TM transducer use?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GT30-TM is designed for transom mount installation, which attaches to the back (transom) of a boat hull.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould a professional install the transducer if there are issues?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIf you experience difficulty during the installation, contact Garmin Product Support or seek the advice of a professional installer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should I do if I encounter problems during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIf you have difficulty during installation, it's recommended to contact Garmin Product Support or consult a professional installer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhere should the transducer be installed for best sonar return?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eInstall all transducers according to the included instructions for best performance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the Garmin GT30-TM transducer be mounted?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GT30-TM is a transom mount transducer and should be attached to the back (transom) of the boat hull for best performance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs the transducer suitable for stepped hulls?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eNo, it is not recommended for use on vessels with a stepped hull.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan this be used on sailboats?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIt is not recommended for sailboats due to excessive heeling.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What mounting style does the GT30-TM transducer use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GT30-TM is designed for transom mount installation, which attaches to the back (transom) of a boat hull.\"}}, {\"@type\": \"Question\", \"name\": \"Should a professional install the transducer if there are issues?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If you experience difficulty during the installation, contact Garmin Product Support or seek the advice of a professional installer.\"}}, {\"@type\": \"Question\", \"name\": \"What should I do if I encounter problems during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If you have difficulty during installation, it's recommended to contact Garmin Product Support or consult a professional installer.\"}}, {\"@type\": \"Question\", \"name\": \"Where should the transducer be installed for best sonar return?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Install all transducers according to the included instructions for best performance.\"}}, {\"@type\": \"Question\", \"name\": \"How should the Garmin GT30-TM transducer be mounted?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GT30-TM is a transom mount transducer and should be attached to the back (transom) of the boat hull for best performance.\"}}, {\"@type\": \"Question\", \"name\": \"Is the transducer suitable for stepped hulls?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, it is not recommended for use on vessels with a stepped hull.\"}}, {\"@type\": \"Question\", \"name\": \"Can this be used on sailboats?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is not recommended for sailboats due to excessive heeling.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626162225489,"sku":"010-01961-00","price":153.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gt30-tm-captura-de-pantalla-2024-05-20-a-las-18.56.20.png?v=1754730051"},{"product_id":"garmin-gt30-th","title":"Garmin GT30-TH","description":"\u003cp\u003eGet extremely clear probe images of objects, structures and fish that are under and on the sides of your boat thanks to this 12-rod transducer that is mounted through the stainless steel wheeled hull.\u003c\/p\u003e \u003cp\u003eThis transducer with built-in fast-response temperature sensor has a power of 500 W per unit (1,500 W in total), a depth of 750 ft (DownVü) and 500 ft left and right (SideVü) and a CHIRP operating frequency of 455\/800 kHz¹;. It is suitable for helmet strut angles of less than 5 degrees. Link it with your GCV™ 10 scanning probe module.\u003c\/p\u003e \u003cp\u003eIncludes translator with stainless steel wheel, fairing block, insulation bushings and plate, extension cable, assembly components and installation instructions. Follow the instructions carefully to avoid damage to the boat.\u003c\/p\u003e \u003cp\u003e¹CHIRP frequency bandwidth: 445 to 475 kHz and 805 to 840 kHz.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003ePhysical And Performance Characteristics\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eFrequency\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eClearVü\/SideVü CHIRP 455 kHz (425-485 kHz) \u0026amp; 800 kHz (790-850 kHz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eEnergy\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eClearVü\/SideVü 500 W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eBeam Width\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eClearVü: 1.4°x53° @ 455 kHz and 0.8°x30° @ 800 kHz\u003cbr\u003e SideVü: 1.1°x53° @ 455 kHZ and 0.7°x30° @ 800 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eMaximum Depth\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eClearVü: 750 ft.; SideVü: 500 ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eCable Length\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e5 ft. + 30 ft. y-extension Cable\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eDEPTH\/SPEED\/TEMPERATURE\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eDepth and Temperature\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eNumber of Sideburns\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e12-pin\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eAft Mirror Angles Allowed\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eUp to 25° deadrise\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=a1e06af68a4e0a25cd4b01c77afdbe04f71372449feb42d3c33bef5ae0e5c430 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the main installation consideration for thru-hull mounting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThru-hull installations require drilling a hole through the hull, which increases installation complexity and needs careful placement.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat installation guidance is given for optimum performance?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eInstall all transducers according to the included installation instructions to achieve best possible performance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the key to optimal transducer performance during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eInstall transducers according to the included instructions to ensure best performance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy might installation be more complex for external thru-hull transducers?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003ePlacement is more complex for external models due to fairing installation and orientation requirements.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhere should thru-hull transducers ideally be located on the hull?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eInstall external thru-hull types with a fairing in clean water, forward of propellers and running gear.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhen should a thru-hull transducer pair be used?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA thru-hull pair is recommended for mounting a SideVü transducer where the deadrise exceeds 5 degrees.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhen is a fairing required for a thru-hull transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA fairing is usually required for external thru-hull transducers to ensure the transducer face is parallel to the waterline.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there thru-hull options for different hull materials?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThere are thru-hull transducers available for every hull material, ensuring broad compatibility.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo thru-hull transducers sit flush with the hull?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eFlush thru-hull transducers are designed to sit flush or nearly flush with the boat hull, minimizing drag.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is the main installation consideration for thru-hull mounting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Thru-hull installations require drilling a hole through the hull, which increases installation complexity and needs careful placement.\"}}, {\"@type\": \"Question\", \"name\": \"What installation guidance is given for optimum performance?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Install all transducers according to the included installation instructions to achieve best possible performance.\"}}, {\"@type\": \"Question\", \"name\": \"What is the key to optimal transducer performance during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Install transducers according to the included instructions to ensure best performance.\"}}, {\"@type\": \"Question\", \"name\": \"Why might installation be more complex for external thru-hull transducers?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Placement is more complex for external models due to fairing installation and orientation requirements.\"}}, {\"@type\": \"Question\", \"name\": \"Where should thru-hull transducers ideally be located on the hull?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Install external thru-hull types with a fairing in clean water, forward of propellers and running gear.\"}}, {\"@type\": \"Question\", \"name\": \"When should a thru-hull transducer pair be used?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A thru-hull pair is recommended for mounting a SideVü transducer where the deadrise exceeds 5 degrees.\"}}, {\"@type\": \"Question\", \"name\": \"When is a fairing required for a thru-hull transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A fairing is usually required for external thru-hull transducers to ensure the transducer face is parallel to the waterline.\"}}, {\"@type\": \"Question\", \"name\": \"Are there thru-hull options for different hull materials?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"There are thru-hull transducers available for every hull material, ensuring broad compatibility.\"}}, {\"@type\": \"Question\", \"name\": \"Do thru-hull transducers sit flush with the hull?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Flush thru-hull transducers are designed to sit flush or nearly flush with the boat hull, minimizing drag.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626162291025,"sku":"010-01961-10","price":543.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/010-01961-10-hr-9000.jpg?v=1754730054"},{"product_id":"garmin-gt30-thp","title":"Garmin GT30-THP","description":"\u003cp\u003eGet extremely clear probe images of objects, structures and fish that are under and on the sides of your boat thanks to these 12-stem transducers mounted through the hull with stainless steel wheels.\u003c\/p\u003e \u003cp\u003eThese transducers with built-in quick-response temperature sensor have a power of 500 W per unit (1,500 W in total), a depth of 750 ft (DownVü) and 500 ft left and right (SideVü) and a CHIRP operating frequency of 455\/800 kHz¹;. They are suitable for helmet strut angles of 5 to 25 degrees. Link them to your GCV™ 10 scanning probe module.\u003c\/p\u003e \u003cp\u003eIt includes 12-stem port and stribor transducers with stainless steel wheels, insulation bushings, fairing blocks, Y-cable, assembly components and installation instructions. Follow the instructions carefully to avoid damage to the boat.\u003c\/p\u003e \u003cp\u003e¹CHIRP frequency bandwidth: 445 to 475 kHz and 805 to 840 kHz.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003ePhysical And Performance Characteristics\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eFrequency\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eClearVü\/SideVü CHIRP 455 kHz (425-485 kHz) \u0026amp; 800 kHz (790-850 kHz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eEnergy\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eClearVü\/SideVü 500 W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eBeam Width\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eClearVü: 1.4°x53° @ 455 kHz and 0.8°x30° @ 800 kHz\u003cbr\u003e SideVü: 1.1°x53° @ 455 kHZ and 0.7°x30° @ 800 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eMaximum Depth\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eClearVü: 750 ft.; SideVü: 500 ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eCable Length\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e5 ft. + 30 ft. y-extension Cable\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eDEPTH\/SPEED\/TEMPERATURE\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eDepth and Temperature\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eNumber of Sideburns\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e12-pin\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eAft Mirror Angles Allowed\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eUp to 25° deadrise\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=ed789ecf3660aad0e229e5c222800103d622c98c8384451bde895866094d145a --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eShould the GT30-THP be installed with a fairing block or flush mount?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eExternal thru-hull transducers typically require a fairing block, which is included, to ensure the transducer face is parallel to the waterline for optimal performance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow complex is it to install a thru-hull transducer like the GT30-THP?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThru-hull placement increases installation complexity and requires drilling a hole through the hull.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should you do if you experience installation difficulties?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eContact Garmin Product Support or seek advice from a professional installer if you have trouble.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the GT30-THP be installed on various hull materials?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, there are thru-hull transducers for every hull material.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs the GT30-THP suitable for sailboats or only powerboats?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThru-hull mounting works for both power and sailboats and all engine types.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should you ensure vertical sonar beams with external thru-hull mounts?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA high-performance fairing block is used so the transducer face is parallel to the waterline, resulting in a truly vertical beam for optimum energy on the target.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhen should I use a thru-hull transducer pair?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA thru-hull pair is recommended when the SideVü transducer is mounted in a location with a deadrise greater than 5 degrees.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhere should the transducer be mounted for best signal return?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMount in clean water forward of propellers and running gear for best signal return; avoid interference with vessel components.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there different styles of thru-hull transducers?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThru-hull transducers come in two styles: flush and external. Flush sits nearly flush with the hull; external extends beyond and may use a fairing.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Should the GT30-THP be installed with a fairing block or flush mount?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"External thru-hull transducers typically require a fairing block, which is included, to ensure the transducer face is parallel to the waterline for optimal performance.\"}}, {\"@type\": \"Question\", \"name\": \"How complex is it to install a thru-hull transducer like the GT30-THP?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Thru-hull placement increases installation complexity and requires drilling a hole through the hull.\"}}, {\"@type\": \"Question\", \"name\": \"What should you do if you experience installation difficulties?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Contact Garmin Product Support or seek advice from a professional installer if you have trouble.\"}}, {\"@type\": \"Question\", \"name\": \"Can the GT30-THP be installed on various hull materials?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, there are thru-hull transducers for every hull material.\"}}, {\"@type\": \"Question\", \"name\": \"Is the GT30-THP suitable for sailboats or only powerboats?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Thru-hull mounting works for both power and sailboats and all engine types.\"}}, {\"@type\": \"Question\", \"name\": \"How should you ensure vertical sonar beams with external thru-hull mounts?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A high-performance fairing block is used so the transducer face is parallel to the waterline, resulting in a truly vertical beam for optimum energy on the target.\"}}, {\"@type\": \"Question\", \"name\": \"When should I use a thru-hull transducer pair?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A thru-hull pair is recommended when the SideVü transducer is mounted in a location with a deadrise greater than 5 degrees.\"}}, {\"@type\": \"Question\", \"name\": \"Where should the transducer be mounted for best signal return?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Mount in clean water forward of propellers and running gear for best signal return; avoid interference with vessel components.\"}}, {\"@type\": \"Question\", \"name\": \"Are there different styles of thru-hull transducers?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Thru-hull transducers come in two styles: flush and external. Flush sits nearly flush with the hull; external extends beyond and may use a fairing.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626164453713,"sku":"010-01961-11","price":970.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gt30-thp-010-01961-11-hr-6004.png?v=1754730060"},{"product_id":"garmin-gt34uhd-th","title":"Garmin GT34UHD-TH","description":"\u003cp\u003e\u003cstrong\u003eCrosshead transducer for high-definition probe system\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDisplay the incredibly sharp images of the ClearVü and SideVü high-definition probes on your compatible plotter using the GCV™ 20 probe module. It offers three matrices, including a downward-facing element (ClearVü of 800 kHz UHD, SideVü of 1200 kHz UHD) and is recommended for helmets with a pantoque angle of up to 5 degrees.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh-definition ClearVü exploration\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThis probe system provides a bright image clarity of the structures and fish under the boat at greater depths than other high-frequency exploration probes because it offers greater power for the detection of targets through a downward-facing element.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh-definition SideVü exploration\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eGet incredibly clear images of the structures and fish on the sides of the boat. This makes it very easy to explore a fishing area quickly, since you will be able to see everything with surprising clarity from the first moment.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003ePhysical And Performance Characteristics\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eFrequency\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eUltra High-Definition ClearVü: 800 kHz (760-880 Khz) \u003cp\u003eUltra High-Definition SideVü: 1,200 kHz (1,060-1,170 kHz)\u003c\/p\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eEnergy\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e500 W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eBeam Width\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eHigh-definition ClearVü: 0.74° X 46°\u003cbr\u003e High-definition SideVü: 0.44° X 55°\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eMaximum Depth\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eHigh-definition ClearVü: 60m\u003cbr\u003e High-definition SideVü: 125' on each side, 250' in total\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eCable Length\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e6m\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eDEPTH\/SPEED\/TEMPERATURE\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eDepth and temperature\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eNumber of Sideburns\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e12 pines\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eAft Mirror Angles Allowed\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003ePantoque angle of up to 25°\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cp\u003e \u003c\/p\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003eProbe Specifications And Functions\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eULTRA-HIGH Definition CLEARVÜ\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e800 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eULTRA-HIGH Definition SIDEVÜ\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e1.200 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=6c7acd655950a66db0283b1dfa044c946de684d5177e8bb494ae7e52039ab190 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWhy does external thru-hull installation require a fairing?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eExternal thru-hull transducers require a fairing block to correctly align the transducer face parallel to the waterline for a vertical beam.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should you do if you have installation difficulties?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIf you experience difficulty during the installation, contact Garmin Product Support or seek the advice of a professional installer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhere should an external thru-hull transducer be installed for best performance?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eExternal thru-hull transducers should be mounted in clean water forward of propellers and running gear for the most effective signal return.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhen should I use a thru-hull pair mounting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA thru-hull pair is recommended if you are mounting a SideVü transducer in a location where the deadrise is greater than 5 degrees.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there different thru-hull options for different hull materials?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThere are thru-hull transducers for every hull material, supporting inboard, outboard, or I\/O engine types.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Why does external thru-hull installation require a fairing?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"External thru-hull transducers require a fairing block to correctly align the transducer face parallel to the waterline for a vertical beam.\"}}, {\"@type\": \"Question\", \"name\": \"What should you do if you have installation difficulties?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If you experience difficulty during the installation, contact Garmin Product Support or seek the advice of a professional installer.\"}}, {\"@type\": \"Question\", \"name\": \"Where should an external thru-hull transducer be installed for best performance?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"External thru-hull transducers should be mounted in clean water forward of propellers and running gear for the most effective signal return.\"}}, {\"@type\": \"Question\", \"name\": \"When should I use a thru-hull pair mounting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A thru-hull pair is recommended if you are mounting a SideVü transducer in a location where the deadrise is greater than 5 degrees.\"}}, {\"@type\": \"Question\", \"name\": \"Are there different thru-hull options for different hull materials?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"There are thru-hull transducers for every hull material, supporting inboard, outboard, or I\/O engine types.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626164486481,"sku":"010-12776-10","price":580.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/010-01961-10-hr-9000_56b4ddb4-05eb-4559-b520-b007e14b65ec.jpg?v=1754730059"},{"product_id":"garmin-gt34uhd-tm","title":"Garmin GT34UHD-TM","description":"\u003cp\u003e\u003cstrong\u003eTransducer with stern mirror support for high-definition probe module system\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDisplay the incredibly sharp images of the ClearVü and SideVü high-definition probes on your compatible plotter using the GCV™ 20 probe module. It offers three matrices, including a downward-oriented element (ClearVü of 800 kHz UHD, SideVü of 1200 kHz UHD)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh-definition ClearVü exploration\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThis probe system provides a bright image clarity of the structures and fish under the boat at greater depths than other high-frequency exploration probes because it offers greater power for the detection of targets through a downward-facing element.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh-definition SideVü exploration\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eGet incredibly clear images of the structures and fish on the sides of the boat. This makes it very easy to explore a fishing area quickly, since you will be able to see everything with surprising clarity from the first moment.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003ePhysical And Performance Characteristics\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eFrequency\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eUltra High-Definition ClearVü: 800 kHz (760-880 Khz) \u003cp\u003eUltra High-Definition SideVü: 1,200 kHz (1,060-1,170 kHz)\u003c\/p\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eEnergy\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e500 W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eBeam Width\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eHigh-definition ClearVü: 0.74° X 46°\u003cbr\u003e High-definition SideVü: 0.44° X 55°\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eMaximum Depth\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eHigh-definition ClearVü: 60m\u003cbr\u003e High-definition SideVü: 125' on each side\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eCable Length\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e6m\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eDEPTH\/SPEED\/TEMPERATURE\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eDepth and temperature\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eNumber of Sideburns\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e12 pines\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eAft Mirror Angles Allowed\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eStern mirror angle of 0°-70°\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cp\u003e \u003c\/p\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003eProbe Specifications And Functions\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eULTRA-HIGH Definition CLEARVÜ\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e800 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eULTRA-HIGH Definition SIDEVÜ\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e1.200 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=8fbe99747ae79c67e230c3d24642527cd08e5e4739fcb2d7e93c5bd4a3f9d618 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWhat maintenance is needed for transom mounts like the GT34UHD-TM?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mounts are easy to install and remove, especially if a kick-up bracket is used, which can aid in maintenance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat type of mounting does the GT34UHD-TM transducer support?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GT34UHD-TM transducer supports transom mount installation, which is attached to the back (transom) of a boat hull.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhere should the GT34UHD-TM be installed for optimal signal?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMount the transducer where nothing on the vessel interferes with the transducer’s active face for the most effective signal return.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there mounting constraints for transom mount transducers?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mounts will not work on vessels with inboard engines or stepped hulls.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWill the GT34UHD-TM transducer work on boats with inboard engines?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mount transducers will not work on vessels with an inboard engine.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the pin count of the GT34UHD-TM connector?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GT34UHD-TM features a 12-pin connector for device integration.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the GT34UHD-TM be used on sailboats?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mounts are not recommended for sailboats due to excessive heeling.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAt what boat speeds does the GT34UHD-TM perform well?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eGood performance can be expected at boat speeds below 30 knots (34 mph).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the maximum depth capability for UHD ClearVü?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe UHD ClearVü system provides brilliant image clarity and is designed for greater depths than other high-frequency sonars.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat elements does the GT34UHD-TM use for scanning?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIt utilizes a downward-facing element for UHD ClearVü and side elements for UHD SideVü imaging.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What maintenance is needed for transom mounts like the GT34UHD-TM?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mounts are easy to install and remove, especially if a kick-up bracket is used, which can aid in maintenance.\"}}, {\"@type\": \"Question\", \"name\": \"What type of mounting does the GT34UHD-TM transducer support?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GT34UHD-TM transducer supports transom mount installation, which is attached to the back (transom) of a boat hull.\"}}, {\"@type\": \"Question\", \"name\": \"Where should the GT34UHD-TM be installed for optimal signal?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Mount the transducer where nothing on the vessel interferes with the transducer’s active face for the most effective signal return.\"}}, {\"@type\": \"Question\", \"name\": \"Are there mounting constraints for transom mount transducers?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mounts will not work on vessels with inboard engines or stepped hulls.\"}}, {\"@type\": \"Question\", \"name\": \"Will the GT34UHD-TM transducer work on boats with inboard engines?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mount transducers will not work on vessels with an inboard engine.\"}}, {\"@type\": \"Question\", \"name\": \"What is the pin count of the GT34UHD-TM connector?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GT34UHD-TM features a 12-pin connector for device integration.\"}}, {\"@type\": \"Question\", \"name\": \"Can the GT34UHD-TM be used on sailboats?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mounts are not recommended for sailboats due to excessive heeling.\"}}, {\"@type\": \"Question\", \"name\": \"At what boat speeds does the GT34UHD-TM perform well?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Good performance can be expected at boat speeds below 30 knots (34 mph).\"}}, {\"@type\": \"Question\", \"name\": \"What is the maximum depth capability for UHD ClearVü?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The UHD ClearVü system provides brilliant image clarity and is designed for greater depths than other high-frequency sonars.\"}}, {\"@type\": \"Question\", \"name\": \"What elements does the GT34UHD-TM use for scanning?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It utilizes a downward-facing element for UHD ClearVü and side elements for UHD SideVü imaging.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626164584785,"sku":"010-12776-00","price":234.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gt34uhd-tm-captura-de-pantalla-2024-05-20-a-las-19.19.58.png?v=1754730061"},{"product_id":"garmin-gt34uhd-thp","title":"Garmin GT34UHD-THP","description":"\u003cp\u003e\u003cstrong\u003ePair of overhead transducers for high-definition probe system\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDisplay the incredibly sharp images of the ClearVü and SideVü high-definition probes on your compatible plotter using the GCV™ 20 probe module. It offers three matrices, including a downward-facing element (ClearVü of 800 kHz UHD, SideVü of 1200 kHz UHD) and is recommended for helmets with a pantoque angle of up to 5 degrees.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh-definition ClearVü exploration\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThis probe system provides a bright image clarity of the structures and fish under the boat at greater depths than other high-frequency exploration probes because it offers greater power for the detection of targets through a downward-facing element.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh-definition SideVü exploration\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eGet incredibly clear images of the structures and fish on the sides of the boat. This makes it very easy to explore a fishing area quickly, since you will be able to see everything with surprising clarity from the first moment.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003ePhysical And Performance Characteristics\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eFrequency\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eUltra High-Definition ClearVü: 800 kHz (760-880 Khz) \u003cp\u003eUltra High-Definition SideVü: 1,200 kHz (1,060-1,170 kHz)\u003c\/p\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eEnergy\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e500 W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eBeam Width\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eHigh-definition ClearVü: 0.74° X 46°\u003cbr\u003e High-definition SideVü: 0.44° X 55°\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eMaximum Depth\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eHigh-definition ClearVü: 60m\u003cbr\u003e High-definition SideVü: 125' on each side, 250' in total\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eCable Length\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e6m\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eDEPTH\/SPEED\/TEMPERATURE\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eDepth and temperature\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eNumber of Sideburns\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e12 pines\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eAft Mirror Angles Allowed\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003ePantoque angle of up to 25°\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cp\u003e \u003c\/p\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003eProbe Specifications And Functions\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eULTRA-HIGH Definition CLEARVÜ\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e800 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eULTRA-HIGH Definition SIDEVÜ\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e1.200 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=1f8cfc998057f49f507c29bc226164fc699ba95fa7a0476ef8e224ecb9dca1a3 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eAre there special mounting requirements for thru-hull installations?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003ePlacement increases the complexity of thru-hull installations and requires a hole in the hull of the boat.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat guidance is given for optimal transducer performance?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTo obtain the best possible performance, install all transducers according to the included installation instructions.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat type of installation is required for the GT34UHD-THP transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GT34UHD-THP is a thru-hull transducer, which means it is installed in a hole drilled through the hull. Placement increases the complexity of thru-hull installations and a hole in the hull is required.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow can installation issues be addressed if they arise?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eFollow the included installation instructions and contact Garmin Product Support or seek a professional installer if you experience difficulty.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich connector pin count does the GT34UHD-THP use?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIt uses a 12-pin connector for integration with compatible systems.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhen is a pair of thru-hull transducers recommended for SideVü?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA thru-hull pair is recommended when mounting a SideVü transducer in a location with deadrise greater than 5 degrees.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhere should external thru-hull transducers be mounted?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eExternals are typically mounted forward of propellers and running gear in clean water for best signal.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the purpose of the downward-facing element in UHD ClearVü?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIt puts more power on targets for greater image clarity and depth compared to other high-frequency scanning sonars.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eOn what types of boats can a thru-hull transducer be used?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThru-hull transducers work with any engine type— inboard, outboard, or I\/O— and for both power and sailboats.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the GT34UHD-THP transducer's power rating?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GT34UHD-THP transducer is rated for 500 W power output.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Are there special mounting requirements for thru-hull installations?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Placement increases the complexity of thru-hull installations and requires a hole in the hull of the boat.\"}}, {\"@type\": \"Question\", \"name\": \"What guidance is given for optimal transducer performance?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"To obtain the best possible performance, install all transducers according to the included installation instructions.\"}}, {\"@type\": \"Question\", \"name\": \"What type of installation is required for the GT34UHD-THP transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GT34UHD-THP is a thru-hull transducer, which means it is installed in a hole drilled through the hull. Placement increases the complexity of thru-hull installations and a hole in the hull is required.\"}}, {\"@type\": \"Question\", \"name\": \"How can installation issues be addressed if they arise?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Follow the included installation instructions and contact Garmin Product Support or seek a professional installer if you experience difficulty.\"}}, {\"@type\": \"Question\", \"name\": \"Which connector pin count does the GT34UHD-THP use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It uses a 12-pin connector for integration with compatible systems.\"}}, {\"@type\": \"Question\", \"name\": \"When is a pair of thru-hull transducers recommended for SideVü?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A thru-hull pair is recommended when mounting a SideVü transducer in a location with deadrise greater than 5 degrees.\"}}, {\"@type\": \"Question\", \"name\": \"Where should external thru-hull transducers be mounted?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Externals are typically mounted forward of propellers and running gear in clean water for best signal.\"}}, {\"@type\": \"Question\", \"name\": \"What is the purpose of the downward-facing element in UHD ClearVü?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It puts more power on targets for greater image clarity and depth compared to other high-frequency scanning sonars.\"}}, {\"@type\": \"Question\", \"name\": \"On what types of boats can a thru-hull transducer be used?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Thru-hull transducers work with any engine type— inboard, outboard, or I\/O— and for both power and sailboats.\"}}, {\"@type\": \"Question\", \"name\": \"What is the GT34UHD-THP transducer's power rating?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GT34UHD-THP transducer is rated for 500 W power output.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626164617553,"sku":"010-12776-11","price":1080.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gt30-thp-010-01961-11-hr-6004_0cc9c595-b6e2-4108-b182-31346ff8a02b.png?v=1754730067"},{"product_id":"garmin-gt20-tm-4-pines","title":"Garmin GT20-TM 4 Pines","description":"\u003cp\u003eGet ultra-clear probe images of objects, structures and fish passing under your boat thanks to this 4-pin transducer.\u003c\/p\u003e \u003cp\u003eThis 20-foot transducer cable with built-in quick-response temperature sensor has a power of 500 W, a depth of 1900 feet (traditional) and 750 feet (ClearVü); an operating frequency of 77\/200 kHz (traditional) and 455\/800 kHz (ClearVü), and a stern mirror angle of 0 to 70 degrees.\u003c\/p\u003e \u003cp\u003eThe transducer comes with a stern mirror and motor mounts for trolling fishing and installation instructions. Follow the instructions carefully to avoid damage to the boat.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003ePhysical And Performance Characteristics\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eFrequency\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional 77\/200; ClearVü CHIRP 455 kHz (435-475 kHz) \u0026amp; 800kHz (800-840 kHz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eEnergy\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional 500 W; ClearVü 500 W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eBeam Width\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional: 45°\/15°\u003cbr\u003e ClearVü: 2.5°x53°@ 455 kHz and 1.6°x29° @ 800 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eMaximum Depth\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional: 1,900 ft.; ClearVü: 750 ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eCable Length\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e20 ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eDEPTH\/SPEED\/TEMPERATURE\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eDepth and Temperature\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eNumber of Sideburns\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e4-pin\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eAft Mirror Angles Allowed\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e0°-70° degree transom\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=b19ac2d9b266d31dc69fb1c03c48111c6fe3bf35e6260064eed5a315ef784f80 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eDoes installation require drilling into the hull?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom and trolling motor mounts generally do not require drilling through the hull, minimizing modifications to your boat.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould this transducer be installed by a professional?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIf you experience difficulty during installation, Garmin suggests contacting Product Support or a professional installer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs wiring into the hull necessary for this transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom and trolling motor mounts do not generally require drilling into the hull, as wiring is routed above the waterline.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhere should the transom mount be installed?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe transom mount should be attached to the back (transom) of the boat hull, ensuring it's out of the way of rollers on trailered boats and in clean water flow.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs this transducer suitable for high-speed boats or trailering?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom-mount transducers are good for trailered boats and are easy to install and remove, especially with a kick-up bracket.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs the transducer easy to remove if needed?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom-mount transducers are easy to install and remove, especially if a kick-up bracket is used.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow can I ensure a stable sonar image when mounted on a trolling motor?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTrolling motor mounts provide sonar images from the bow, but the image correspondence depends on motor orientation and may shift with current or wind.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhere can this transducer be mounted on the hull?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom-mount transducers are attached to the back (transom) of the boat hull.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Does installation require drilling into the hull?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom and trolling motor mounts generally do not require drilling through the hull, minimizing modifications to your boat.\"}}, {\"@type\": \"Question\", \"name\": \"Should this transducer be installed by a professional?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If you experience difficulty during installation, Garmin suggests contacting Product Support or a professional installer.\"}}, {\"@type\": \"Question\", \"name\": \"Is wiring into the hull necessary for this transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom and trolling motor mounts do not generally require drilling into the hull, as wiring is routed above the waterline.\"}}, {\"@type\": \"Question\", \"name\": \"Where should the transom mount be installed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The transom mount should be attached to the back (transom) of the boat hull, ensuring it's out of the way of rollers on trailered boats and in clean water flow.\"}}, {\"@type\": \"Question\", \"name\": \"Is this transducer suitable for high-speed boats or trailering?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom-mount transducers are good for trailered boats and are easy to install and remove, especially with a kick-up bracket.\"}}, {\"@type\": \"Question\", \"name\": \"Is the transducer easy to remove if needed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom-mount transducers are easy to install and remove, especially if a kick-up bracket is used.\"}}, {\"@type\": \"Question\", \"name\": \"How can I ensure a stable sonar image when mounted on a trolling motor?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Trolling motor mounts provide sonar images from the bow, but the image correspondence depends on motor orientation and may shift with current or wind.\"}}, {\"@type\": \"Question\", \"name\": \"Where can this transducer be mounted on the hull?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom-mount transducers are attached to the back (transom) of the boat hull.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626177986897,"sku":"010-01960-00","price":94.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/captura-de-pantalla-2024-06-04-a-las-20.37.07.png?v=1754730408"},{"product_id":"garmin-gt20-tm-8-pines","title":"Garmin GT20-TM 8 Pines","description":"\u003cp\u003eGet ultra-clear probe images of objects, structures and fish passing under your boat thanks to this all-in-one 8-pin transducer.\u003c\/p\u003e \u003cp\u003eThis 20-foot transducer cable with built-in fast-response temperature sensor has a power of 500 W, a depth of 1900 feet (traditional) and 750 feet (ClearVü); an operating frequency of 77\/200 kHz (traditional) and 455 kHz (ClearVü), and an aft mirror angle of 0 to 70 degrees.\u003c\/p\u003e \u003cp\u003eThe transducer comes with a stern mirror and motor mounts for trolling fishing and installation instructions. Follow the instructions carefully to avoid damage to the boat.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003ePhysical And Performance Characteristics\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eFrequency\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional 77\/200; ClearVü CHIRP 455 kHz (435-475 kHz) \u0026amp; 800kHz (800-840 kHz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eEnergy\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional 500 W; ClearVü 500 W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eBeam Width\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional: 45°\/15°\u003cbr\u003e ClearVü: 2.5°x53°@ 455 kHz and 1.6°x29° @ 800 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eMaximum Depth\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional: 1,900 ft.; ClearVü: 750 ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eCable Length\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e20 ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eDEPTH\/SPEED\/TEMPERATURE\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eDepth and Temperature\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eNumber of Sideburns\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e8-pin\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eAft Mirror Angles Allowed\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e0°-70° degree transom\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=9eb88837a443b8134ab6dc58dd86a5996de3f60ac01e23e148443418da119327 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eDo I need to drill into the hull for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mounting usually requires drilling to attach the bracket; follow included instructions for safe installation.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there hull types unsuitable for transom mount installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mounts will not work on stepped hulls.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should I do if experiencing difficulty during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eContact Garmin Product Support or seek advice from a professional installer if you have installation issues.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat hull materials can be used with the mounting hardware?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mount transducers can be used with any hull material.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there compatibility warnings for inboard engine vessels?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mount transducers will not work on vessels with an inboard engine.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the transducer be used with different hull materials?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mounts can be used with any hull material.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs the transducer suitable for high-speed boats?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mounts provide good performance at boat speeds below 30 knots (34 mph).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Do I need to drill into the hull for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mounting usually requires drilling to attach the bracket; follow included instructions for safe installation.\"}}, {\"@type\": \"Question\", \"name\": \"Are there hull types unsuitable for transom mount installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mounts will not work on stepped hulls.\"}}, {\"@type\": \"Question\", \"name\": \"What should I do if experiencing difficulty during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Contact Garmin Product Support or seek advice from a professional installer if you have installation issues.\"}}, {\"@type\": \"Question\", \"name\": \"What hull materials can be used with the mounting hardware?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mount transducers can be used with any hull material.\"}}, {\"@type\": \"Question\", \"name\": \"Are there compatibility warnings for inboard engine vessels?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mount transducers will not work on vessels with an inboard engine.\"}}, {\"@type\": \"Question\", \"name\": \"Can the transducer be used with different hull materials?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mounts can be used with any hull material.\"}}, {\"@type\": \"Question\", \"name\": \"Is the transducer suitable for high-speed boats?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mounts provide good performance at boat speeds below 30 knots (34 mph).\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626178019665,"sku":"010-01960-01","price":116.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gt20-tm-captura-de-pantalla-2024-06-04-a-las-20.44.03.png?v=1754730410"},{"product_id":"garmin-gt21-tm","title":"Garmin GT21-TM","description":"\u003cp\u003eThis aft mirror mount transducer provides extremely clear probe images of objects, structures and fish that are under your boat. This transducer with traditional probe and CHIRP DownVü is optimized to offer maximum performance at great depths and in rough sea conditions.\u003c\/p\u003e \u003cp\u003eThe CHIRP DownVü element has a power of 500 W and operating frequencies of 260\/455 kHz. The traditional probe has a power of 600 W and operating frequencies of 50\/200 kHz. It also has a built-in quick-response temperature sensor.\u003c\/p\u003e \u003cp\u003eGT21-TM includes an 8-pin transducer with assembly components and installation instructions. Follow the instructions carefully to avoid damage to the boat.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003ePhysical And Performance Characteristics\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eFrequency\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional 50\/200; ClearVü CHIRP 260 kHz (245-275 kHz) \u0026amp; 455 kHz (445-465 kHz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eEnergy\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional 600 W; ClearVü 500 W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eBeam Width\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional: 40°\/10°\u003cbr\u003e ClearVü: 2.0°x51° @ 260 kHz and 1.4°x29° @ 455 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eMaximum Depth\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional: 1,500 ft.; ClearVü: 1,000 ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eCable Length\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e30 ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eDEPTH\/SPEED\/TEMPERATURE\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eDepth and Temperature\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eNumber of Sideburns\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e8-pin\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eAft Mirror Angles Allowed\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e0°-70° degree transom\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cp\u003e \u003c\/p\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=e84f15abab86f00d09ddad164f9a630e4f21d449566993c83e4e58125db31764 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWill the GT21-TM transducer work with boats having an inboard engine?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mount transducers will not work on vessels with an inboard engine, as mentioned in Garmin's installation guidance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat safety precautions should be followed during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eFollow the included installation instructions carefully to avoid damage to your boat when installing the transducer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWho should install the GT21-TM if I encounter difficulties?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIf installation is difficult, contact Garmin Product Support or seek the advice of a professional installer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWho should be contacted if I experience installation issues with GT21-TM?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIf you experience difficulty during installation, contact Garmin Product Support or seek a professional installer's advice.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should a transom mount transducer like the GT21-TM be mounted?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mount transducers are attached to the back (transom) of the boat hull and are easy to install and remove, especially if a kick-up bracket is used. They are good for trailered boats and perform well at boat speeds below 30 knots (34 mph).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should I position the GT21-TM for best sonar performance?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eInstall transducers according to the included instructions for best performance. If you have issues, contact Garmin support or a professional installer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the transducer be serviced in-water?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mount units can be installed and serviced more easily than some other types, but in-hull models are notable for this feature.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDoes the GT21-TM require the hull to be drilled for mounting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mount types attach to the back of the hull, typically requiring drilling. Thru-hull types, however, require a hole through the hull.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs the GT21-TM compatible with stepped hull designs?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mount transducers will not work on stepped hulls, per Garmin recommendations.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs the GT21-TM suitable for use on sailboats?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mount transducers are not recommended for sailboats because of excessive heeling, which can affect performance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will the GT21-TM transducer work with boats having an inboard engine?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mount transducers will not work on vessels with an inboard engine, as mentioned in Garmin's installation guidance.\"}}, {\"@type\": \"Question\", \"name\": \"What safety precautions should be followed during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Follow the included installation instructions carefully to avoid damage to your boat when installing the transducer.\"}}, {\"@type\": \"Question\", \"name\": \"Who should install the GT21-TM if I encounter difficulties?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If installation is difficult, contact Garmin Product Support or seek the advice of a professional installer.\"}}, {\"@type\": \"Question\", \"name\": \"Who should be contacted if I experience installation issues with GT21-TM?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If you experience difficulty during installation, contact Garmin Product Support or seek a professional installer's advice.\"}}, {\"@type\": \"Question\", \"name\": \"How should a transom mount transducer like the GT21-TM be mounted?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mount transducers are attached to the back (transom) of the boat hull and are easy to install and remove, especially if a kick-up bracket is used. They are good for trailered boats and perform well at boat speeds below 30 knots (34 mph).\"}}, {\"@type\": \"Question\", \"name\": \"How should I position the GT21-TM for best sonar performance?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Install transducers according to the included instructions for best performance. If you have issues, contact Garmin support or a professional installer.\"}}, {\"@type\": \"Question\", \"name\": \"Can the transducer be serviced in-water?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mount units can be installed and serviced more easily than some other types, but in-hull models are notable for this feature.\"}}, {\"@type\": \"Question\", \"name\": \"Does the GT21-TM require the hull to be drilled for mounting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mount types attach to the back of the hull, typically requiring drilling. Thru-hull types, however, require a hole through the hull.\"}}, {\"@type\": \"Question\", \"name\": \"Is the GT21-TM compatible with stepped hull designs?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mount transducers will not work on stepped hulls, per Garmin recommendations.\"}}, {\"@type\": \"Question\", \"name\": \"Is the GT21-TM suitable for use on sailboats?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mount transducers are not recommended for sailboats because of excessive heeling, which can affect performance.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626178052433,"sku":"010-01962-00","price":153.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/captura-de-pantalla-2024-06-04-a-las-20.50.32.png?v=1754730411"},{"product_id":"garmin-gt21-th","title":"Garmin GT21-TH","description":"\u003cp\u003eThis hull-mounted transducer provides extremely clear probe images of objects, structures and fish that are under your boat. This transducer with traditional probe and CHIRP DownVü is optimized to offer maximum performance at great depths and in rough sea conditions.\u003c\/p\u003e \u003cp\u003eThe CHIRP DownVü element has a power of 500 W and operating frequencies of 260\/455 kHz. The traditional probe has a power of 600 W and operating frequencies of 50\/200 kHz. It includes a built-in quick-response temperature sensor. For hull strut angles of less than 25 degrees.\u003c\/p\u003e \u003cp\u003eGT21-TH includes an 8-pin transducer with stainless steel wheel, fairing block, bushings and insulation plate, assembly components and installation instructions. Follow the instructions carefully to avoid damage to the boat.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003ePhysical And Performance Characteristics\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eFrequency\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional 50\/200; ClearVü CHIRP 260 kHz (245-275 kHz) \u0026amp; 455 kHz (445-465 kHz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eEnergy\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional 600 W; ClearVü 500 W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eBeam Width\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional: 40°\/10°\u003cbr\u003e ClearVü: 2.0°x51° @ 260 kHz and 1.4°x29° @ 455 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eMaximum Depth\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional: 1,500 ft.; ClearVü: 1,000 ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eCable Length\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e30 ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eDEPTH\/SPEED\/TEMPERATURE\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eDepth and Temperature\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eNumber of Sideburns\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e8-pin\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eAft Mirror Angles Allowed\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eUp to 25° deadrise\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=f88cad331fc744c0b4aa4b75413437591f53e07e41945cf59086f4b8b72c2ec8 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eIs placement of the transducer important for performance?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTo obtain the best possible performance, install all transducers according to the included installation instructions.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat type of installation is required for thru-hull transducers?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThru-hull transducers are installed in a hole drilled through the hull.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the transducer be serviced with the vessel in the water?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIn-hull and certain thru-hull installations may allow for servicing with the vessel in the water, but always refer to specific instructions for your configuration.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should I do if I have installation difficulties?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eContact Garmin Product Support or seek the advice of a professional installer if you experience difficulties during installation.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy is mounting location important for transducer performance?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eProper mounting ensures a truly vertical beam and maximizes signal strength. Install in clean water forward of propellers and running gear.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhen should a thru-hull pair be used?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA thru-hull pair is recommended when mounting a SideVü transducer in a location with a deadrise greater than 5 degrees.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow is a thru-hull transducer mounted—what are the main styles?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThru-hull transducers come in two styles: flush and external. Flush types sit nearly flush with the hull and are used for smaller boats with minimal deadrise; external types extend beyond the hull's surface and require a fairing block, suited for larger vessels.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhere should the transducer be mounted relative to other parts of the boat?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMount in clean water forward of propellers and running gear to minimize interference.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Is placement of the transducer important for performance?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"To obtain the best possible performance, install all transducers according to the included installation instructions.\"}}, {\"@type\": \"Question\", \"name\": \"What type of installation is required for thru-hull transducers?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Thru-hull transducers are installed in a hole drilled through the hull.\"}}, {\"@type\": \"Question\", \"name\": \"Can the transducer be serviced with the vessel in the water?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"In-hull and certain thru-hull installations may allow for servicing with the vessel in the water, but always refer to specific instructions for your configuration.\"}}, {\"@type\": \"Question\", \"name\": \"What should I do if I have installation difficulties?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Contact Garmin Product Support or seek the advice of a professional installer if you experience difficulties during installation.\"}}, {\"@type\": \"Question\", \"name\": \"Why is mounting location important for transducer performance?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Proper mounting ensures a truly vertical beam and maximizes signal strength. Install in clean water forward of propellers and running gear.\"}}, {\"@type\": \"Question\", \"name\": \"When should a thru-hull pair be used?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A thru-hull pair is recommended when mounting a SideVü transducer in a location with a deadrise greater than 5 degrees.\"}}, {\"@type\": \"Question\", \"name\": \"How is a thru-hull transducer mounted—what are the main styles?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Thru-hull transducers come in two styles: flush and external. Flush types sit nearly flush with the hull and are used for smaller boats with minimal deadrise; external types extend beyond the hull's surface and require a fairing block, suited for larger vessels.\"}}, {\"@type\": \"Question\", \"name\": \"Where should the transducer be mounted relative to other parts of the boat?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Mount in clean water forward of propellers and running gear to minimize interference.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626178085201,"sku":"010-01962-10","price":425.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gt21-th-captura-de-pantalla-2024-06-04-a-las-20.56.50.png?v=1754730416"},{"product_id":"garmin-gt22hw-tm","title":"Garmin GT22HW-TM","description":"\u003cp\u003eThe GT22HW-TM transducer is perfect for freshwater fishermen who want a traditional CHIRP probe and a CHIRP ClearVü exploration probe. This stern mirror-mounted transducer or motor for trolling fishing constantly displays fish bows in a clear and sharp way with a superior lens separation, as well as a clear definition of the structure under the boat.\u003c\/p\u003e \u003cp\u003eThe 8-prong transducer includes a traditional CHIRP probe with high frequency band and wide beam (150-240 kHz) and has a power of 250 W. The CHIRP ClearVü element (455\/800 kHz) has a power of 500 W.\u003c\/p\u003e \u003cp\u003eThanks to its compact size, the GT22HW-TM is ideal for mounting on trolling fishing engines. For the installation, follow the instructions provided carefully to avoid damage to your boat.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003ePhysical And Performance Characteristics\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eFrequency\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eCHIRP High Wide (150-240 kHz); ClearVü CHIRP 455 kHz (425-485 kHz) \u0026amp; 800 kHz (790-850 kHz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eEnergy\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eCHIRP Traditional 250 W; ClearVü 350 W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eBeam Width\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional: 24°-16°\u003cbr\u003e ClearVü: 2.0°x50° @ 455 kHz and 1.0°x30° @ 800 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eMaximum Depth\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional: 800 ft.; ClearVü: 500 ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eCable Length\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e20 ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eDEPTH\/SPEED\/TEMPERATURE\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eDepth and Temperature\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eNumber of Sideburns\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e8-pin\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eAft Mirror Angles Allowed\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e0°-70° degree transom\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cp\u003e \u003c\/p\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=ebb39d0b5a1a5c0172f5225582bc1b12befed63a26a1987333d7a9b9c5c8c9a3 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eIs the transducer easy to remove if needed?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eBoth trolling motor and transom mounts are designed for easy installation and removal for maintenance or transport.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow important is it to follow the installation instructions?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIt is very important to install all transducers according to the included instructions for best performance and to avoid damage.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there maintenance considerations for this transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom and trolling motor mounts allow for easy removal, making cleaning and maintenance easy if needed.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the main safety warning for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIt's important to follow the included installation instructions to avoid damaging your boat and ensure optimal performance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should you do if you encounter installation issues?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eContact Garmin Product Support or seek professional advice if you experience problems during installation.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDoes the GT22HW-TM support trolling motor mounting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, this transducer is designed for trolling motor mounting and can be easily installed on the shaft or below the body of a trolling motor.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there engine type limitations for transom mounting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mounts are not suitable for vessels with inboard engines. Outboard engines are compatible.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the transducer be easily removed for storage?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom and trolling motor mounts are easy to install and remove, allowing you to store the transducer with the trolling motor when not in use.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there hull material limitations for mounting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mounts can be used with any hull material. In-hull and kayak in-hull mounts are not recommended for metal or wooden hulls.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there specific mounting constraints to consider?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mounts are not recommended for sailboats due to excessive heeling, and do not work on vessels with an inboard engine or stepped hull.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the main disadvantage of mounting on the trolling motor?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe transducer hangs low and may hit submerged objects if depth is not monitored.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat performance considerations exist for different mount types?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mounts perform well below 30 knots (34 mph); trolling motor mounts provide data from the bow, but image direction may change with current or wind.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Is the transducer easy to remove if needed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Both trolling motor and transom mounts are designed for easy installation and removal for maintenance or transport.\"}}, {\"@type\": \"Question\", \"name\": \"How important is it to follow the installation instructions?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is very important to install all transducers according to the included instructions for best performance and to avoid damage.\"}}, {\"@type\": \"Question\", \"name\": \"Are there maintenance considerations for this transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom and trolling motor mounts allow for easy removal, making cleaning and maintenance easy if needed.\"}}, {\"@type\": \"Question\", \"name\": \"What is the main safety warning for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It's important to follow the included installation instructions to avoid damaging your boat and ensure optimal performance.\"}}, {\"@type\": \"Question\", \"name\": \"What should you do if you encounter installation issues?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Contact Garmin Product Support or seek professional advice if you experience problems during installation.\"}}, {\"@type\": \"Question\", \"name\": \"Does the GT22HW-TM support trolling motor mounting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, this transducer is designed for trolling motor mounting and can be easily installed on the shaft or below the body of a trolling motor.\"}}, {\"@type\": \"Question\", \"name\": \"Are there engine type limitations for transom mounting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mounts are not suitable for vessels with inboard engines. Outboard engines are compatible.\"}}, {\"@type\": \"Question\", \"name\": \"Can the transducer be easily removed for storage?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom and trolling motor mounts are easy to install and remove, allowing you to store the transducer with the trolling motor when not in use.\"}}, {\"@type\": \"Question\", \"name\": \"Are there hull material limitations for mounting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mounts can be used with any hull material. In-hull and kayak in-hull mounts are not recommended for metal or wooden hulls.\"}}, {\"@type\": \"Question\", \"name\": \"Are there specific mounting constraints to consider?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mounts are not recommended for sailboats due to excessive heeling, and do not work on vessels with an inboard engine or stepped hull.\"}}, {\"@type\": \"Question\", \"name\": \"What is the main disadvantage of mounting on the trolling motor?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The transducer hangs low and may hit submerged objects if depth is not monitored.\"}}, {\"@type\": \"Question\", \"name\": \"What performance considerations exist for different mount types?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mounts perform well below 30 knots (34 mph); trolling motor mounts provide data from the bow, but image direction may change with current or wind.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626178117969,"sku":"010-12403-00","price":153.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gt22hw-tm-captura-de-pantalla-2024-06-04-a-las-21.12.26.png?v=1754730419"},{"product_id":"garmin-gt23-m-tm","title":"Garmin GT23 m-TM","description":"\u003cp\u003eThe GT23M-TM transducer is perfect for coastal and high-sea fishermen who want a traditional CHIRP probe and a CHIRP ClearVü exploration probe. This aft mirror mount transducer constantly shows fish arcs in a clear and sharp way with a superior lens separation, as well as a clear definition of the structure under the boat.\u003c\/p\u003e \u003cp\u003eThe 8-pin transducer includes a traditional CHIRP probe with a medium frequency band (80-160 kHz) and has a power of 600 W. The CHIRP ClearVü element (260\/455 kHz) has a power of 500 W.\u003c\/p\u003e \u003cp\u003eFor installation, follow the instructions provided carefully to avoid damage to your boat.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003eCaracterísticas Físicas Y De Rendimiento\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eFrecuencia\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eCHIRP con banda de frecuencia media (80-160 kHz); CHIRP ClearVü 260 kHz (245-275 kHz) y 455 kHz (445-465 kHz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eENERGÍA\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTradicional CHIRP 600 W; ClearVü 500 W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eAncho de Haz\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTradicional: 24°-13°\u003cbr\u003e ClearVü: 2,0° X 51° a 260 kHz 1,4° X 29° a 455 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eProfundidad MÁXIMA\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTradicional: 1800 ft; ClearVü: 1000 ft\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eLongitud del Cable\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e30 ft\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003ePROFUNDIDAD\/VELOCIDAD\/TEMPERATURA\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eProfundidad y temperatura\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eNÚMERO De Patillas\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e8 pines\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eÁNGULOS De Espejo de POPA\/PANTOQUE Admitidos\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eÁngulo de espejo de popa de 0°-70°\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=dc2f9dd6471035700c9cd9e2ec62bd1b785e059b693a7c5846d61360be1102e1 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eIs it necessary to drill into the hull for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eFor transom mount transducers like the GT23 m-TM, drilling into the hull is not generally required, making installation less invasive compared to thru-hull mounts.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat installation instructions must be followed for the GT23 m-TM?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eCarefully follow the included installation instructions to avoid boat damage.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould the installation be handled by a professional?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIf you experience difficulty, contact Garmin Product Support or seek the advice of a professional installer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should you do if you have difficulty during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIf you experience difficulty during installation, contact Garmin Product Support or seek the advice of a professional installer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat kind of mounting is used for the Garmin GT23 m-TM?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mounting is used, as these are attached to the back of a boat hull and are easy to install and remove.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should you do to obtain the best possible performance from the transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eInstall according to the included instructions and consult a professional if needed.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat can impact signal return for transom or hull mounts?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMounting location and interference from hull features can affect signal return quality.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan this transducer be used on sailboats?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mount transducers are not recommended for sailboats due to excessive heeling.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the main disadvantage of transom mount transducers on stepped hulls?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThey will not work on stepped hulls, as performance will be affected.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs the GT23 m-TM suitable for inboard engine boats?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mount transducers like the GT23 m-TM will not work on vessels with an inboard engine, so this product is not suitable for boats with inboard motors.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Is it necessary to drill into the hull for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"For transom mount transducers like the GT23 m-TM, drilling into the hull is not generally required, making installation less invasive compared to thru-hull mounts.\"}}, {\"@type\": \"Question\", \"name\": \"What installation instructions must be followed for the GT23 m-TM?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Carefully follow the included installation instructions to avoid boat damage.\"}}, {\"@type\": \"Question\", \"name\": \"Should the installation be handled by a professional?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If you experience difficulty, contact Garmin Product Support or seek the advice of a professional installer.\"}}, {\"@type\": \"Question\", \"name\": \"What should you do if you have difficulty during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If you experience difficulty during installation, contact Garmin Product Support or seek the advice of a professional installer.\"}}, {\"@type\": \"Question\", \"name\": \"What kind of mounting is used for the Garmin GT23 m-TM?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mounting is used, as these are attached to the back of a boat hull and are easy to install and remove.\"}}, {\"@type\": \"Question\", \"name\": \"What should you do to obtain the best possible performance from the transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Install according to the included instructions and consult a professional if needed.\"}}, {\"@type\": \"Question\", \"name\": \"What can impact signal return for transom or hull mounts?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Mounting location and interference from hull features can affect signal return quality.\"}}, {\"@type\": \"Question\", \"name\": \"Can this transducer be used on sailboats?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mount transducers are not recommended for sailboats due to excessive heeling.\"}}, {\"@type\": \"Question\", \"name\": \"What is the main disadvantage of transom mount transducers on stepped hulls?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They will not work on stepped hulls, as performance will be affected.\"}}, {\"@type\": \"Question\", \"name\": \"Is the GT23 m-TM suitable for inboard engine boats?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mount transducers like the GT23 m-TM will not work on vessels with an inboard engine, so this product is not suitable for boats with inboard motors.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626178183505,"sku":"010-12404-00","price":271.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gt23m-tm-captura-de-pantalla-2024-06-04-a-las-21.21.01.png?v=1754730418"},{"product_id":"garmin-gt23-m-th","title":"Garmin GT23 m-TH","description":"\u003cp\u003eThe GT23M-TH transducer is perfect for coastal and offshore fishermen who want a traditional CHIRP probe and a CHIRP ClearVü exploration probe. This aft mirror mount transducer constantly shows fish arcs in a clear and sharp way with a superior lens separation, as well as a clear definition of the structure under the boat.\u003c\/p\u003e \u003cp\u003eThe 8-pin transducer includes a traditional CHIRP probe with a medium frequency band (80-160 kHz) and has a power of 600 W. The CHIRP ClearVü element (260\/455 kHz) has a power of 500 W.\u003c\/p\u003e \u003cp\u003eFor installation, follow the instructions provided carefully to avoid damage to your boat\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=1e4eec30a22a72a97e8e5aaba7b0cd4a91256a2c7b3528d7a911fec6ef26f928 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWhat safety precautions should I take during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAlways wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding. The device must be installed with anti-rotation bolts (included) to avoid damage.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat tools are needed for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYou will need a drill, various drill bits, wrenches up to 38 mm, marine sealant, sandpaper, masking tape, and possibly a hole saw (size depends on hull type).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should I prepare a non-cored fiberglass hull for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMark and drill all holes perpendicular to the water surface, use masking tape to reduce gel coat cracking, and sand\/clean the areas after drilling.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy use anti-rotation bolts during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAnti-rotation bolts prevent device rotation during movement, which could cause vessel damage.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould I update the chartplotter software after installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, you must update the Garmin chartplotter software when you install this device.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do I prepare a metal hull for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDrill a 3 mm pilot hole, then use a 32 mm hole saw for the stem hole and a 13 mm drill bit for bolt holes; clean and sand all drilled areas.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do I apply marine sealant when installing?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eApply marine sealant around the base of the stem and anti-rotation bolts—do not apply it directly to the stem or anti-rotation bolts.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhere should the transducer not be installed?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDo not mount the transducer near the engine, in the engine room, or in turbulent water for optimal performance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould the mounting template be printed at home?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIt is not recommended to print the template on your own. Use the template that came in the product box.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs a fairing block recommended for mounting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIf the deadrise angle at your mounting location exceeds 5°, you should use a fairing block to mount the transducer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should a cored fiberglass hull be sealed?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eSeal the exposed inner core with marine grade fiberglass epoxy resin before securing the transducer in the hull.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What safety precautions should I take during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding. The device must be installed with anti-rotation bolts (included) to avoid damage.\"}}, {\"@type\": \"Question\", \"name\": \"What tools are needed for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"You will need a drill, various drill bits, wrenches up to 38 mm, marine sealant, sandpaper, masking tape, and possibly a hole saw (size depends on hull type).\"}}, {\"@type\": \"Question\", \"name\": \"How should I prepare a non-cored fiberglass hull for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Mark and drill all holes perpendicular to the water surface, use masking tape to reduce gel coat cracking, and sand\/clean the areas after drilling.\"}}, {\"@type\": \"Question\", \"name\": \"Why use anti-rotation bolts during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Anti-rotation bolts prevent device rotation during movement, which could cause vessel damage.\"}}, {\"@type\": \"Question\", \"name\": \"Should I update the chartplotter software after installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, you must update the Garmin chartplotter software when you install this device.\"}}, {\"@type\": \"Question\", \"name\": \"How do I prepare a metal hull for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Drill a 3 mm pilot hole, then use a 32 mm hole saw for the stem hole and a 13 mm drill bit for bolt holes; clean and sand all drilled areas.\"}}, {\"@type\": \"Question\", \"name\": \"How do I apply marine sealant when installing?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Apply marine sealant around the base of the stem and anti-rotation bolts—do not apply it directly to the stem or anti-rotation bolts.\"}}, {\"@type\": \"Question\", \"name\": \"Where should the transducer not be installed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Do not mount the transducer near the engine, in the engine room, or in turbulent water for optimal performance.\"}}, {\"@type\": \"Question\", \"name\": \"Should the mounting template be printed at home?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is not recommended to print the template on your own. Use the template that came in the product box.\"}}, {\"@type\": \"Question\", \"name\": \"Is a fairing block recommended for mounting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If the deadrise angle at your mounting location exceeds 5°, you should use a fairing block to mount the transducer.\"}}, {\"@type\": \"Question\", \"name\": \"How should a cored fiberglass hull be sealed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Seal the exposed inner core with marine grade fiberglass epoxy resin before securing the transducer in the hull.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626178347345,"sku":"010-12404-10","price":617.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gt21-th-captura-de-pantalla-2024-06-04-a-las-20.56.50_59a899de-0c07-494f-9457-06ad4ba65817.png?v=1754730420"},{"product_id":"garmin-gt24uhd-tm-ultra-high-definition-scanning-sonar-all-in-one-transducer","title":"Garmin GT24UHD-TM Ultra High-Definition Scanning Sonar All-in-one Transducer","description":"\u003cp\u003e\u003cstrong\u003eAll-in-one transducer\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eA single transducer provides the maximum resolution available in the images of the ClearVü scanning probe and the traditional CHIRP probe with an incredibly sharp high frequency band\u003c\/li\u003e \u003cli\u003eThe traditional CHIRP probe with high frequency band provides a clear separation of the objectives and an amazing definition\u003c\/li\u003e \u003cli\u003eVisualize incredibly detailed images of fish and structures up to 60m below your boat with the 800 kHz ClearVü probe\u003c\/li\u003e \u003cli\u003eAll-in-one design, easy to install and compact, which includes brackets for mounting in aft mirror and electric drag motor\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eAn extremely clear view of what's underneath\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe high-definition all-in-one GT24 transducer provides image details so clear and accurate that it allows you to see the fish that swim between the branches, plants and submerged rocks. You can see the difference between small and large fish, and even see fish swimming in schools. Get the maximum resolution available in the images of the ClearVü scanning probe and the traditional CHIRP probe with an incredibly sharp high frequency band, all in one transducer.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIncredible performance\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eA high-definition exploration probe that shows incredibly detailed images of fish and structures up to 60 m below your boat with the 800 kHz ClearVü exploration probe. It is easy to install and includes brackets for mounting in a stern mirror and electric trawling motor, so you can start fishing as soon as possible.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003ePhysical And Performance Characteristics\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eFrequency\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eCHIRP High Wide (150-240 kHz); UHD ClearVü CHIRP 800 kHz (760-880 kHz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eEnergy\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eCHIRP Traditional 350 W; ClearVü 350 W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eBeam Width\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eCHIRP: 24°-16°\u003cbr\u003e ClearVü: 0.94°x60° @ 800 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eMaximum Depth\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eCHIRP: 800 ft.; ClearVü 200 ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eCable Length\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e20 ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eDEPTH\/SPEED\/TEMPERATURE\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eDepth and Temperature\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eNumber of Sideburns\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e8\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eAft Mirror Angles Allowed\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e0°-70° degree transom\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=8f09ead6956afe0f8974836a19c749aa9a166f01e4f8ac732b9e51255ebb6aac --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eAre there engine compatibility constraints for transom mounting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mount installations are not compatible with inboard engines.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs special wiring required for this transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe documentation emphasizes matching the transducer to your device's sonar, as each requires a different connector; plug-and-play wiring is typical for transom and trolling motor installations.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there safety requirements during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAlways install according to Garmin’s included instructions to ensure safe operation and optimal performance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs this transducer suitable for trailered boats?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mount installations are suitable for trailered boats since they remain out of the way of rollers and are easy to install and remove.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eUp to what boat speed does this transducer perform well in transom mount?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eOptimal performance is achieved at boat speeds below 30 knots (34 mph) in transom mount installations.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs the transducer suitable for sailboats when transom mounted?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mount installations are not recommended for sailboats because of excessive heeling.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWill a transom mount installation work on a stepped hull?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mounts will not work on stepped hull vessels.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs installation\/removal of the transom mount bracket easy?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom mounts are easy to install and remove, especially if a kick-up bracket is used.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there installation guidelines to ensure performance?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eFor best performance, install transducers according to the included installation instructions and consult support if needed.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs there guidance on mounting below the waterline?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIf a transom mount is used, the transducer is positioned below the waterline for optimal sonar performance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Are there engine compatibility constraints for transom mounting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mount installations are not compatible with inboard engines.\"}}, {\"@type\": \"Question\", \"name\": \"Is special wiring required for this transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The documentation emphasizes matching the transducer to your device's sonar, as each requires a different connector; plug-and-play wiring is typical for transom and trolling motor installations.\"}}, {\"@type\": \"Question\", \"name\": \"Are there safety requirements during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Always install according to Garmin’s included instructions to ensure safe operation and optimal performance.\"}}, {\"@type\": \"Question\", \"name\": \"Is this transducer suitable for trailered boats?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mount installations are suitable for trailered boats since they remain out of the way of rollers and are easy to install and remove.\"}}, {\"@type\": \"Question\", \"name\": \"Up to what boat speed does this transducer perform well in transom mount?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Optimal performance is achieved at boat speeds below 30 knots (34 mph) in transom mount installations.\"}}, {\"@type\": \"Question\", \"name\": \"Is the transducer suitable for sailboats when transom mounted?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mount installations are not recommended for sailboats because of excessive heeling.\"}}, {\"@type\": \"Question\", \"name\": \"Will a transom mount installation work on a stepped hull?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mounts will not work on stepped hull vessels.\"}}, {\"@type\": \"Question\", \"name\": \"Is installation\/removal of the transom mount bracket easy?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom mounts are easy to install and remove, especially if a kick-up bracket is used.\"}}, {\"@type\": \"Question\", \"name\": \"Are there installation guidelines to ensure performance?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"For best performance, install transducers according to the included installation instructions and consult support if needed.\"}}, {\"@type\": \"Question\", \"name\": \"Is there guidance on mounting below the waterline?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If a transom mount is used, the transducer is positioned below the waterline for optimal sonar performance.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626178511185,"sku":"010-12908-00","price":197.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmgt24uhd-tm-ultra-high-definition-scanning-sonar-all-in-one-transducer-captura-de-pantalla-2024-06-04-a-las-21.42.02.png?v=1754730427"},{"product_id":"garmin-gt36uhd-tm","title":"Garmin GT36UHD-TM","description":"\u003cp\u003eThanks to the ClearVü and SideVü high-definition exploration probes, which provide totally sharp images of fish and structures, this transducer offers the ultimate in versatility, so you can spend more time fishing.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCLEARVÜ HIGH-DEFINITION Scanning Probe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eGet totally sharp images of the structures and fish under the boat at greater depths than any other high-frequency exploration probe. A downward-facing element increases the power for the detection of targets.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSIDEVÜ HIGH-DEFINITION Exploration Probe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eObserve everything the first time with incredibly sharp images of the structures and fish that are on the sides of the boat. Now, the SideVü probe has 20% more range at 1000 kHz, so you can see even further than before.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eVarious Exploration Probe Frequencies\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eUse the perfect frequency for the waters you are in. The transducer provides 455 kHz, 800 kHz and 1000 kHz to ensure maximum performance at any depth.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntense Color Ranges\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThanks to the intense and high-contrast color ranges of the exploration probes, distinguishing objectives and structures has never been easier.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAssembly Options\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eWe all have our preferences. Hence, we have included mounting components for both the aft mirror and the electric motor.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTraditional CHIRP Probe Optional\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eUse a Y-cable (sold separately) to link it with a Garmin GT8HW-IH or GT15M-IH transducer (sold separately) and add a traditional high-frequency band CHIRP probe to obtain an extraordinarily clear lens separation.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003ePhysical And Performance Characteristics\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eFrequency\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eClearVü\/SideVü: 455 kHz (425-485 kHz), 800 kHz (790-850 kHz) y 1000 kHz (940-1100 kHz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eEnergy\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eClearVü\/SideVü: 500 W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eBeam Width\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e \u003cstrong\u003eClearVü\u003c\/strong\u003e\u003cbr\u003e 0,52 X 52 a 1000 kHz\u003cbr\u003e 0,64 X 35 a 800 kHz\u003cbr\u003e 1,1 X 52 a 455 kHz\u003cstrong\u003eSideVü\u003c\/strong\u003e\u003cbr\u003e 0,52 X 52 a 1000 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eMaximum Depth\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eClearVü: 122 m; SideVü: 152 m\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eCable Length\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e7,62 m\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eDEPTH\/SPEED\/TEMPERATURE\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eDepth and temperature\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eNumber of Sideburns\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e12 pin\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eAft Mirror Angles Allowed\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eStern mirror angle of 0°-70°\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cp\u003e \u003c\/p\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=d4206c5b97b09e2096806a40cc128c861fa13f3debb6f966bb87f44a330b5caa --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eShould the transducer be installed with the boat out of water?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom and trolling motor mounts generally require the boat to be out of water for safe, correct installation.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there specific installation instructions I should follow?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eInstall all transducers according to the included installation instructions for best performance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan this transducer be installed in-hull?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIn-hull mounting is not a recommended option for this model; mounting options include transom (aft mirror) or trolling motor.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDoes the transducer require hole drilling for mounting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTransom and trolling motor mounts generally do not require drilling through the hull; refer to specific instructions included.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the function of the transducer's 12-pin connector?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe 12-pin connector provides interface to compatible sonar\/chartplotter devices for data and power connection.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eFor which sonar technologies is the GT36UHD-TM designed?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GT36UHD-TM supports Ultra High-Definition ClearVü and SideVü scanning sonar technologies for detail below and off to the sides.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Should the transducer be installed with the boat out of water?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom and trolling motor mounts generally require the boat to be out of water for safe, correct installation.\"}}, {\"@type\": \"Question\", \"name\": \"Are there specific installation instructions I should follow?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Install all transducers according to the included installation instructions for best performance.\"}}, {\"@type\": \"Question\", \"name\": \"Can this transducer be installed in-hull?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"In-hull mounting is not a recommended option for this model; mounting options include transom (aft mirror) or trolling motor.\"}}, {\"@type\": \"Question\", \"name\": \"Does the transducer require hole drilling for mounting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Transom and trolling motor mounts generally do not require drilling through the hull; refer to specific instructions included.\"}}, {\"@type\": \"Question\", \"name\": \"What is the function of the transducer's 12-pin connector?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The 12-pin connector provides interface to compatible sonar\/chartplotter devices for data and power connection.\"}}, {\"@type\": \"Question\", \"name\": \"For which sonar technologies is the GT36UHD-TM designed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GT36UHD-TM supports Ultra High-Definition ClearVü and SideVü scanning sonar technologies for detail below and off to the sides.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626178642257,"sku":"010-13072-00","price":308.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gt36uhd-tm-captura-de-pantalla-2024-06-04-a-las-21.52.46.png?v=1754730426"},{"product_id":"garmin-gt54uhd-tm-ultra-high-definition-scanning-sonar-all-in-one-transducer","title":"Garmin GT54UHD-TM Ultra High-Definition Scanning Sonar All-in-one Transducer","description":"\u003cp\u003e\u003cstrong\u003eAll-in-one transducer\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eA single transducer provides the maximum resolution available in the images of the ClearVü and SideVü exploration probes, and the traditional CHIRP probe with incredibly sharp high frequency band\u003c\/li\u003e \u003cli\u003eThe traditional CHIRP probe with high frequency band provides a clear separation of the objectives and an amazing definition\u003c\/li\u003e \u003cli\u003eVisualize incredibly detailed images of fish and structures up to 60m below your boat with the 800 kHz ClearVü probe\u003c\/li\u003e \u003cli\u003eThe two frequency settings of the SideVü probe (455\/1200 kHz) provide an extended range of up to 150 m\u003c\/li\u003e \u003cli\u003eAll-in-one design, easy to install and compact, which includes brackets for mounting in aft mirror and electric drag motor\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eExtremely high clarity\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe high-definition all-in-one GT54 transducer provides details of images that are so clear and accurate that it allows you to see the fish that swim between the branches of trees, plants and submerged rocks. You can see the difference between small and large fish, and even see fish swimming in schools. Get the maximum resolution available in the images of the ClearVü and SideVü exploration probes, and the traditional CHIRP probe with an incredibly sharp high-frequency band, all in one transducer.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExtremely high performance\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe high-definition scanning probe provides great performance in terms of depth and distance. It shows you incredibly detailed images of fish and structures up to 60 m below your boat with ClearVü of 800 kHz. In addition, thanks to the two frequency settings of the SideVü probe (455\/1200 kHz), it offers an extended range of up to 150 m. It is easy to install and includes brackets for mounting in a stern mirror and electric trawling motor, so you can start fishing as soon as possible.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003ePhysical And Performance Characteristics\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eFrequency\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eCHIRP High Wide (150-240 kHz); UHD ClearVü CHIRP 800 kHz (760-880 kHz); UHD SideVü 1,200kHz (1020-1230 kHz); CHIRP SideVü 455 kHz (425-485 kHz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eEnergy\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eCHIRP Traditional 350 W; ClearVü\/SideVü 350 W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eBeam Width\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eCHIRP: 24°-16°\u003cbr\u003e ClearVü: 0.94°x60° @ 800 kHz\u003cbr\u003e SideVü: 1.62°x50°\u003cbr\u003e UHD SideVü: 0.441°x52° @ 1200 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eMaximum Depth\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eCHIRP: 800 ft.; ClearVü 200 ft.; SideVü 500'; UHD SideVü 125'\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eCable Length\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e20 ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eDEPTH\/SPEED\/TEMPERATURE\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eDepth and Temperature\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eNumber of Sideburns\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e12 pin\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eAft Mirror Angles Allowed\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e0°-70° degree transom\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=94ff814eaae55c32ad356175783649cde6414280247e61498b8517ffa6938f2e --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWhere can I find further installation assistance if needed?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIf you experience difficulty during installation, contact Garmin Product Support or a professional installer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Where can I find further installation assistance if needed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If you experience difficulty during installation, contact Garmin Product Support or a professional installer.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626178675025,"sku":"010-12909-00","price":308.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gt22hw-tm-captura-de-pantalla-2024-06-04-a-las-21.12.26_51c4b33e-b0aa-493c-b246-6ce379d73bb7.png?v=1754730427"},{"product_id":"garmin-gt56uhd-tm","title":"Garmin GT56UHD-TM","description":"\u003cp\u003eThanks to the ClearVü and SideVü high-definition exploration probes and the traditional CHIRP probe with high frequency band, among other elements, this all-in-one transducer offers the ultimate in versatility, so you can spend more time fishing.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCLEARVÜ HIGH-DEFINITION Scanning Probe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eGet totally sharp images of the structures and fish under the boat at greater depths than any other high-frequency exploration probe. A downward-facing element increases the power for the detection of targets.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSIDEVÜ HIGH-DEFINITION Exploration Probe\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eObserve everything the first time with incredibly sharp images of the structures and fish that are on the sides of the boat. Now, the SideVü probe has 20% more range at 1000 kHz, so you can see even further than before.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTraditional CHIRP Probe with High Frequency Band\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eEnjoy an incredibly sharp lens separation and definition up to 244 m (800 feet) below the boat.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eVarious Exploration Probe Frequencies\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eUse the perfect frequency for the waters you are in. The transducer provides 455 kHz, 800 kHz and 1000 kHz to ensure maximum performance at any depth.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntense Color Ranges\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThanks to the intense and high-contrast color ranges of the exploration probes, distinguishing objectives and structures has never been easier.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAssembly Options\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eWe all have our preferences. That is why we have included mounting components in the aft mirror, the electric motor and in helmet mode.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003ePhysical And Performance Characteristics\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eFrequency\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional CHIRP with high frequency band (150-240 kHz); ClearVü\/SideVü: 455 kHz (425-485 kHz), 800 kHz (790-850 kHz) and 1000 kHz (940-1100 kHz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eEnergy\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTradicional: 350 W; ClearVü\/SideVü: 500 W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eBeam Width\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional CHIRP: 24-16; ClearVü 0.52 x 52 @ 1000 kHz, 0.64 x 35 @ 800 kHz, 1.1 x 52 @ 455 kHz; SideVü 0.52 x 52 @ 1000 kHz, 0.64 x 35 @ 800 kHz, 1.1 x 52 @ 455 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eMaximum Depth\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional: 244 m in fresh water; ClearVü: 122 m; SideVü: 152 m\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eCable Length\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e7,62 m\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eDEPTH\/SPEED\/TEMPERATURE\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eDepth and temperature\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eNumber of Sideburns\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e12 pin\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eAft Mirror Angles Allowed\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eStern mirror angle of 0°-70°\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=8fb13115154090f9ee2331d9e61840f3fb4cfee97099ff5e72bfa8e533fd8fd6 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWhat key steps ensure optimal performance when installing the transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eFor best results, always follow the included installation instructions and consult Garmin Product Support or a professional installer if needed.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What key steps ensure optimal performance when installing the transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"For best results, always follow the included installation instructions and consult Garmin Product Support or a professional installer if needed.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626178707793,"sku":"010-13073-00","price":352.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gt36uhd-tm-captura-de-pantalla-2024-06-04-a-las-21.52.46_882d2eba-50c1-4ada-8f29-efb189ccd563.png?v=1754730429"},{"product_id":"garmin-gt51-m-tm","title":"Garmin GT51 m-TM","description":"\u003cp\u003eThis aft mirror mount transducer provides extremely clear probe images of objects, structures and fish that are under your boat. This transducer with traditional CHIRP probe and CHIRP DownVü\/SideVü is optimized to offer maximum performance at great depths and in rough sea conditions.\u003c\/p\u003e \u003cp\u003eThe CHIRP DownVü\/SideVü elements have a power of 500 W per element (1,500 W in total) and operating frequencies of 260\/455 kHz. The traditional CHIRP probe has a power of 600 W and CHIRP with an average operating frequency band of 80-160 kHz. It also has a built-in quick-response temperature sensor.\u003c\/p\u003e \u003cp\u003eGT51M-TM includes a 12-pin transducer with assembly components and installation instructions. Follow the instructions carefully to avoid damage to the boat.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003ePhysical And Performance Characteristics\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eFrequency\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eCHIRP Mid-band (80-160 kHz); ClearVü\/SideVü CHIRP 260 kHz (245-275 kHz) \u0026amp; 455 kHz (445-465 kHz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eEnergy\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eCHIRP Traditional 600 W; ClearVü\/SideVü 500 W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eBeam Width\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional: 24°-13°\u003cbr\u003e ClearVü\/SideVü: 2.0°x51° @ 260 kHz and 1.4°x29° @ 455 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eMaximum Depth\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional: 1,800 ft.; ClearVü: 1,000 ft.; SideVü: 750 ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eCable Length\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e30 ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eDEPTH\/SPEED\/TEMPERATURE\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eDepth and Temperature\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eNumber of Sideburns\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e12-pin\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eAft Mirror Angles Allowed\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e0°-70° degree transom\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=969859e4afe95c8214897c2a305eaab78d944404282a3d90b0c794e750ef18e9 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eShould I install the transducer according to any instructions?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIt is important to install all transducers according to the included installation instructions to achieve optimal performance and avoid potential issues.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat guidance is provided if I have installation difficulties?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIf you experience difficulty during the installation, contact Garmin Product Support or seek the advice of a professional installer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWho should I contact if I have difficulty with installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIf you experience difficulty during installation, Garmin recommends contacting Product Support or seeking a professional installer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIf the transducer is installed incorrectly, what might happen?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIncorrect installation can result in loss of signal or ineffective sonar performance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre trailered boats compatible with this transducer's mounting options?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, the transom mount is suitable for trailered boats as it stays out of the way of the rollers.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Should I install the transducer according to any instructions?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is important to install all transducers according to the included installation instructions to achieve optimal performance and avoid potential issues.\"}}, {\"@type\": \"Question\", \"name\": \"What guidance is provided if I have installation difficulties?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If you experience difficulty during the installation, contact Garmin Product Support or seek the advice of a professional installer.\"}}, {\"@type\": \"Question\", \"name\": \"Who should I contact if I have difficulty with installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If you experience difficulty during installation, Garmin recommends contacting Product Support or seeking a professional installer.\"}}, {\"@type\": \"Question\", \"name\": \"If the transducer is installed incorrectly, what might happen?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Incorrect installation can result in loss of signal or ineffective sonar performance.\"}}, {\"@type\": \"Question\", \"name\": \"Are trailered boats compatible with this transducer's mounting options?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, the transom mount is suitable for trailered boats as it stays out of the way of the rollers.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626178969937,"sku":"010-01966-00","price":462.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gt23m-tm-captura-de-pantalla-2024-06-04-a-las-21.21.01_905c01ba-0bbe-45f6-bcf5-20eaca8685e7.png?v=1754730441"},{"product_id":"garmin-gt51-m-th","title":"Garmin GT51 m-TH","description":"\u003cp\u003eThis hull-mounted transducer provides extremely clear probe images of objects, structures and fish that are under your boat. This transducer with traditional CHIRP probe and CHIRP DownVü\/SideVü is optimized to offer maximum performance at great depths and in rough sea conditions.\u003c\/p\u003e \u003cp\u003eThe CHIRP DownVü\/SideVü elements have a power of 500 W per element (1,500 W in total) and operating frequencies of 260\/455 kHz. The traditional CHIRP probe has a power of 600 W and CHIRP with an average operating frequency band of 80-160 kHz. It includes a built-in quick-response temperature sensor. For hull strut angles of less than 25 degrees.\u003c\/p\u003e \u003cp\u003eGT51M-TH includes a 12-pin transducer with stainless steel wheel, fairing block, bushings and insulation plate, assembly components and installation instructions. Follow the instructions carefully to avoid damage to the boat.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003ePhysical And Performance Characteristics\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eFrequency\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eCHIRP Mid-band (80-160 kHz); ClearVü\/SideVü CHIRP 260 kHz (245-275 kHz) \u0026amp; 455 kHz (445-465 kHz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eEnergy\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eCHIRP Traditional 600 W; ClearVü\/SideVü 500 W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eBeam Width\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional: 24°-13°\u003cbr\u003e ClearVü\/SideVü: 2.0°x51° @ 260 kHz and 1.4°x29° @ 455 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eMaximum Depth\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional: 1,800 ft.; ClearVü: 1,000 ft.; SideVü: 750 ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eCable Length\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e5 ft. + 30 ft. extension cable\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eDEPTH\/SPEED\/TEMPERATURE\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eDepth and Temperature\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eNumber of Sideburns\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e12-pin\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eAft Mirror Angles Allowed\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eUp to 5° deadrise\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=b7b79ecea559841598740554817abac6991aab86dc3f34ea58d95c0211d3cd1d --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eAre installation instructions provided with the GT51 m-TH?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, installation instructions are included and should be followed carefully to avoid damage to the boat.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat type of mounting is required for the GT51 m-TH transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GT51 m-TH is a thru-hull transducer, meaning it must be installed through a hole drilled in the boat hull, and can be used on power and sailboats.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat type of hull material is supported for thru-hull installations?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThru-hull transducers are offered for every hull material, but specific installation guidance should be followed based on your boat type.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhen is a thru-hull transducer pair recommended?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA pair is recommended for mounting SideVü transducers when deadrise exceeds 5 degrees.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs the mounting style suitable for trailered boats?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eFlush thru-hull transducers are often chosen for minimal drag, suitable for sailing vessels and smaller boats.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy is the fairing block important for this transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA high-performance fairing ensures the transducer face is parallel to the waterline for an accurate vertical beam and optimal signal.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there specific hull types suitable for this transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThru-hull transducers work with any engine type and any hull material, for both power and sailboats.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Are installation instructions provided with the GT51 m-TH?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, installation instructions are included and should be followed carefully to avoid damage to the boat.\"}}, {\"@type\": \"Question\", \"name\": \"What type of mounting is required for the GT51 m-TH transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GT51 m-TH is a thru-hull transducer, meaning it must be installed through a hole drilled in the boat hull, and can be used on power and sailboats.\"}}, {\"@type\": \"Question\", \"name\": \"What type of hull material is supported for thru-hull installations?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Thru-hull transducers are offered for every hull material, but specific installation guidance should be followed based on your boat type.\"}}, {\"@type\": \"Question\", \"name\": \"When is a thru-hull transducer pair recommended?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A pair is recommended for mounting SideVü transducers when deadrise exceeds 5 degrees.\"}}, {\"@type\": \"Question\", \"name\": \"Is the mounting style suitable for trailered boats?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Flush thru-hull transducers are often chosen for minimal drag, suitable for sailing vessels and smaller boats.\"}}, {\"@type\": \"Question\", \"name\": \"Why is the fairing block important for this transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A high-performance fairing ensures the transducer face is parallel to the waterline for an accurate vertical beam and optimal signal.\"}}, {\"@type\": \"Question\", \"name\": \"Are there specific hull types suitable for this transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Thru-hull transducers work with any engine type and any hull material, for both power and sailboats.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626179002705,"sku":"010-01966-10","price":698.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gt21-th-captura-de-pantalla-2024-06-04-a-las-20.56.50_05847183-decb-47cb-a047-b35e2d370ffd.png?v=1754730443"},{"product_id":"garmin-gt51-m-thp","title":"Garmin GT51 m-THP","description":"\u003cp\u003eThis pair of transducers mounted through the hull provides extremely clear probe images of objects, structures and fish that are under your boat. These transducers with traditional CHIRP probe and CHIRP DownVü\/SideVü are optimized to offer maximum performance at great depths and in rough sea conditions.\u003c\/p\u003e \u003cp\u003eThe CHIRP DownVü\/SideVü elements have a power of 500 W per element (1,500 W in total) and operating frequencies of 260\/455 kHz. The traditional CHIRP probe has a power of 600 W and CHIRP with an average operating frequency band of 80-160 kHz. It includes a built-in quick-response temperature sensor. For hull strut angles of less than 25 degrees.\u003c\/p\u003e \u003cp\u003eGT51M-THP includes 12-lug transducers for port\/stribor with stainless steel wheels, fairing blocks, Y-cable, bushings, assembly components and installation instructions. Follow the instructions carefully to avoid damage to the boat.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable class=\"app__product__specs__container__group\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"specs-group narrow-column\"\u003ePhysical And Performance Characteristics\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eFrequency\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eCHIRP Mid-band (80-160 kHz); ClearVü\/SideVü CHIRP 260 kHz (245-275 kHz) \u0026amp; 455 kHz (445-465 kHz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eEnergy\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eCHIRP Traditional 600 W; ClearVü\/SideVü 500 W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eBeam Width\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional: 24°-13°\u003cbr\u003e ClearVü\/SideVü: 2.0°x51° @ 260 kHz and 1.4°x29° @ 455 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eMaximum Depth\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eTraditional: 1,800 ft.; ClearVü: 1,000 ft.; SideVü: 750 ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eCable Length\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e5 ft. + 30 ft. y-extension Cable\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eDEPTH\/SPEED\/TEMPERATURE\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eDepth and Temperature\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eNumber of Sideburns\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003e12-pin\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd class=\"narrow-column\"\u003eAft Mirror Angles Allowed\u003c\/td\u003e \u003ctd class=\"wide-column\"\u003eUp to 25° deadrise\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cp\u003e \u003c\/p\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=f7a83a4b4c076d5dd719be18250240497ece9636f88d3071fcd368b6abf30b32 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eAre fairing blocks needed for installation of this transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, a high-performance fairing block is included and recommended for proper external thru-hull mounting, ensuring the transducer face is parallel to the waterline.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat type of mounting is required for the GT51 m-THP transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GT51 m-THP transducer requires thru-hull mounting and comes with mounting components and fairing blocks for installation.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat key installation requirements should I follow for this thru-hull transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTo obtain the best possible performance, install all transducers according to the included installation instructions. If you experience difficulty during the installation, contact Garmin Product Support or seek the advice of a professional installer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat guidance is given for troubleshooting installation issues?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIf you have difficulty during installation, Garmin recommends contacting their Product Support or consulting a professional installer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there different styles of thru-hull mounting for this transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThru-hull transducers come in two styles: flush and external. Flush transducers sit nearly flush with the hull, while external types require a fairing.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhen should I use a pair of thru-hull transducers?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA thru-hull pair is recommended when mounting a SideVü transducer in a location that has a deadrise greater than 5 degrees.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy would I use a high performance fairing block with a thru-hull transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA high-performance fairing block aims the sound beam vertically for best signal return and a vertical beam.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Are fairing blocks needed for installation of this transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, a high-performance fairing block is included and recommended for proper external thru-hull mounting, ensuring the transducer face is parallel to the waterline.\"}}, {\"@type\": \"Question\", \"name\": \"What type of mounting is required for the GT51 m-THP transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GT51 m-THP transducer requires thru-hull mounting and comes with mounting components and fairing blocks for installation.\"}}, {\"@type\": \"Question\", \"name\": \"What key installation requirements should I follow for this thru-hull transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"To obtain the best possible performance, install all transducers according to the included installation instructions. If you experience difficulty during the installation, contact Garmin Product Support or seek the advice of a professional installer.\"}}, {\"@type\": \"Question\", \"name\": \"What guidance is given for troubleshooting installation issues?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If you have difficulty during installation, Garmin recommends contacting their Product Support or consulting a professional installer.\"}}, {\"@type\": \"Question\", \"name\": \"Are there different styles of thru-hull mounting for this transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Thru-hull transducers come in two styles: flush and external. Flush transducers sit nearly flush with the hull, while external types require a fairing.\"}}, {\"@type\": \"Question\", \"name\": \"When should I use a pair of thru-hull transducers?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A thru-hull pair is recommended when mounting a SideVü transducer in a location that has a deadrise greater than 5 degrees.\"}}, {\"@type\": \"Question\", \"name\": \"Why would I use a high performance fairing block with a thru-hull transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A high-performance fairing block aims the sound beam vertically for best signal return and a vertical beam.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626179035473,"sku":"010-01966-11","price":1279.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gt56uhd-tm-captura-de-pantalla-2024-06-04-a-las-22.20.26_8d4366c8-c365-4b6a-b6f4-7164eb649405.png?v=1754730444"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/collections\/Captura_de_pantalla_5-11-2025_14615_www.garmin.com.jpg?v=1762347994","url":"https:\/\/www.sailrace.com\/fr-ca\/collections\/scanning-sonar-transducers.oembed?page=3","provider":"SailRACE","version":"1.0","type":"link"}