Harken 30mm Protexit™ Double Exit Block

When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too. Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates. Sheave Ø (mm) 30 mm
Sheave Ø (in) 1 3/16 in
Length (mm) 97 mm
Length (in) 3 13/16 in
Weight (g) 57 g
Weight (oz) 2 oz
Maximum line Ø (mm) 8 mm
Maximum line Ø (in) 5/16 in
Fasteners (mm) 5 FH mm
Fasteners (in) #10 FH in
Fastener spacing (mm) 79 mm
A (mm) 18.2 mm
B (mm) 70.1 mm
Maximum working load (kg) 250 kg
Maximum working load (lb) 550 lb
Breaking load (kg) 500 kg
Breaking load (lb) 1103 lb

Brand	HARKEN
SKU	1201
GTIN	097653284635

The following products are from the same Category as this one:

[ywqa_questions]