Harken 50mm Protexit™ Exit Block

When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too. Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates. Sheave Ø (mm) 50 mm
Sheave Ø (in) 1 15/16 in
Length (mm) 117 mm
Length (in) 4 5/8 in
Weight (g) 128 g
Weight (oz) 4.5 oz
Maximum line Ø (mm) 12 mm
Maximum line Ø (in) 1/2 in
Fasteners (mm) 6 FH mm
Fasteners (in) 1/4 FH in
Fastener spacing (mm) 90 mm
A (mm) 23.3 mm
B (mm) 71.5 mm
Maximum working load (kg) 800 kg
Maximum working load (lb) 1760 lb
Breaking load (kg) 1600 kg
Breaking load (lb) 3528 lb

Brand	HARKEN
SKU	1203
GTIN	097653284659

The following products are from the same Category as this one:

[ywqa_questions]