{"product_id":"harken-bb-32-mm-4-1-cb-genoa-lead-performance-car","title":"Harken BB 32 mm 4: 1 CB Genoa Lead Performance Car","description":"\u003c!-- harken-official:v2 Sku:G3247B page_sha256:fb8b4bad8877884aef119146ca794736e656e78216b72a1685b5bd48c026eb5d --\u003e\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eCB adjustable genoa lead cars feature recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainless steel sheave carriers pivot 60 degrees to accommodate changing lead angles. Wide sheave holds two sheets during sail changes. Sheave carriers feature high-performance sheaves with roller bearings to handle radial loads, while sideload balls handle thrust loads for easy trimming and fore-and-aft adjustment. Cars feature car-mounted, sleeve-bearing control blocks for strength and durability. All CB genoa lead cars are compatible with Harken end controls. Kits are available for purchase upgrades up to 4:1. Torlon is a registered trademark of Solvay Advanced Polymers L.L.C.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable style=\"border-collapse:collapse;width:100%;max-width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:8px;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:8px;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003eBreaking load (kg)\u003c\/td\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003e4536 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003eBreaking load (lb)\u003c\/td\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003e10000 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003eLength (in)\u003c\/td\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003e9 1\/16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003eLength (mm)\u003c\/td\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003e231 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003eMaximum working load (kg)\u003c\/td\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003e2268 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003eMaximum working load (lb)\u003c\/td\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003e5000 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003eSheave Ø (in)\u003c\/td\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003e3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003eSheave Ø (mm)\u003c\/td\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003e76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003eUse with track\/rail\u003c\/td\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003eR32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003eWeight (g)\u003c\/td\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003e1846 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003eWeight (oz)\u003c\/td\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003e65.12 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003eWidth (in)\u003c\/td\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003e3 3\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003eWidth (mm)\u003c\/td\u003e\n\u003ctd style=\"border-bottom:1px solid #eee;padding:8px;vertical-align:top;\"\u003e85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c!-- sr-faq v=1 vendor=harken source_sha256=dae854d18806ef05b6649dbed6f60b0167b0d2a10ac878f7e38376cd266dea61 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWhat should each installation include to ensure safety?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eEvery installation must include Harken track endstops. Arrange tackle so cars do not hit endstops under load.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should you do if any ball bearings are lost during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eRefer to the instructions for the correct number of balls to load; consult the chart for quantities.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the key safety warning when installing CB Genoa Lead Cars?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eStrictly follow all instructions to avoid accidents, damage, personal injury, or death. Refer to the manual for safety info.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do you attach a splice to the deadend on car or controls?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eLoosen one deadend eyestrap screw, remove the other, rotate bail to capture splice loop, and reinstall screws with threadlocker.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do you clean and maintain the CB genoa lead car?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eClean by flushing with fresh water. Periodically use detergent\/water solution and roll car to distribute. Do not use spray lubricants.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre CB cars compatible with older Harken tracks?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eCB cars are shipped for use on CB track made after 2003 with grooves for retaining clips. See manual if you have older track.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the guidance for using teak cleaners or caustic solutions?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eExposure to some teak cleaners and caustic solutions can discolor parts and is not covered under warranty.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should you do if the car does not roll easily onto the track?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eCheck that you are using CB track, as cars won't roll unless they have retaining clips. Do not remove the ball retaining wires.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan CB+ cars be converted to run on non-CB tracks?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eCB+ cars can convert to run on old-style, non-CB track. Requires CB+ type and specific instructions.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs there a specific procedure for removing or loading ball bearings into CB cars?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eRemovals: Push one ball at a time from the retaining clip center. Loading: Gently load one ball at a time with clip in place.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should you avoid using as a lubricant on ball bearings?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDo not use spray lubricants, as they can cause ball bearings to skid instead of roll.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What should each installation include to ensure safety?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Every installation must include Harken track endstops. Arrange tackle so cars do not hit endstops under load.\"}}, {\"@type\": \"Question\", \"name\": \"What should you do if any ball bearings are lost during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Refer to the instructions for the correct number of balls to load; consult the chart for quantities.\"}}, {\"@type\": \"Question\", \"name\": \"What is the key safety warning when installing CB Genoa Lead Cars?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Strictly follow all instructions to avoid accidents, damage, personal injury, or death. Refer to the manual for safety info.\"}}, {\"@type\": \"Question\", \"name\": \"How do you attach a splice to the deadend on car or controls?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Loosen one deadend eyestrap screw, remove the other, rotate bail to capture splice loop, and reinstall screws with threadlocker.\"}}, {\"@type\": \"Question\", \"name\": \"How do you clean and maintain the CB genoa lead car?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Clean by flushing with fresh water. Periodically use detergent\/water solution and roll car to distribute. Do not use spray lubricants.\"}}, {\"@type\": \"Question\", \"name\": \"Are CB cars compatible with older Harken tracks?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"CB cars are shipped for use on CB track made after 2003 with grooves for retaining clips. See manual if you have older track.\"}}, {\"@type\": \"Question\", \"name\": \"What is the guidance for using teak cleaners or caustic solutions?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Exposure to some teak cleaners and caustic solutions can discolor parts and is not covered under warranty.\"}}, {\"@type\": \"Question\", \"name\": \"What should you do if the car does not roll easily onto the track?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Check that you are using CB track, as cars won't roll unless they have retaining clips. Do not remove the ball retaining wires.\"}}, {\"@type\": \"Question\", \"name\": \"Can CB+ cars be converted to run on non-CB tracks?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"CB+ cars can convert to run on old-style, non-CB track. Requires CB+ type and specific instructions.\"}}, {\"@type\": \"Question\", \"name\": \"Is there a specific procedure for removing or loading ball bearings into CB cars?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Removals: Push one ball at a time from the retaining clip center. Loading: Gently load one ball at a time with clip in place.\"}}, {\"@type\": \"Question\", \"name\": \"What should you avoid using as a lubricant on ball bearings?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Do not use spray lubricants, as they can cause ball bearings to skid instead of roll.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e\u003c!-- \/harken-official --\u003e","brand":"Harken","offers":[{"title":"Default Title","offer_id":53196181307729,"sku":"G3247B","price":2279.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/52bf23f5-e5f6-4511-90d5-13d64fb41b63.jpg?v=1772624637","url":"https:\/\/www.sailrace.com\/hi\/products\/harken-bb-32-mm-4-1-cb-genoa-lead-performance-car","provider":"SailRACE","version":"1.0","type":"link"}