NKE Pad Display

2023-08-17T10:25:07+02:00

Prezzo: 315.95

This wired remote control incorporates the A-B-C-D keys to directly access pre-programmed configurations.

For example, after a start in configuration A, a simple press of the B key will switch all Multidisplay with the useful channels for upwind.

The C key will be for the downwind leg, etc.

It also allows access to the various menus.

Specifications

Alimentation | 8V – 32V DC
Consommation | < 30 mA @ 12V
Etanchéité | IPX7
Câble | Ø5,5mm, 2 conducteurs + fil de masse, longueur 6m
Température de fonctionnement | -10°C / 50°C
Température de stockage | -20°C / 60°C
Poids | 350 g avec 6 m de câble et capot de protection

Dimensions

Avec capot de protection | 122 x 62 x 27 mm
Sans capot de protection | 115 x 58 x 23 mm

Fastening elements

Ecrou 4 lobes M14 | Ref : 30-95-032
Fixamo M14 | Ref : 30-95-031

Features

The upper part of the keyboard is common to both PADs with the same capabilities.

The difference here is in the lower part with dedicated stopwatch keys and shortcut keys A, B, C and D.

You set each display independently for a response to a shortcut key.

You can imagine display contexts such as: port maneuver, regatta start phase, close edge, bearing, etc … In a single key you modify the page of all the displays of the edge to access the data that you are interested in this context.

Note: The PAD Display is not necessary to control the Multidisplay, the PAD Pilot can be enough, but it offers interesting possibilities with its shortcut keys.