Filter

NKE Mast Angle Sensor

Name: NKE Mast Angle Sensor
SKU: 99-50-003
Price: 1356.39 EUR
Availability: InStock

Original price was: 1.507,00 €.Current price is: 1.356,39 €.

SKU: 99-50-003 Category: Sensors

1ST ORDER DISCOUNT

Claim your initial 5% discount on your first order.
Claim it here!

PRICE GUARANTEE

If you find a cheaper price in the next 72 hours we will match it.

OFFICIAL WARRANTY

We are Authorised Dealers for all brands. You will be fully covered.

Terms and Conditions

FAQ & Terms

LOCAL DELIVERY OPTIONS

Standard Delivery usually 3-5 days.
Express Delivery usually 2-3 days.

Rebate

PRICE GUARANTEE

If you find a cheaper price in the next 72 hours we will match it.

1ST ORDER DISCOUNT

Claim your initial 5% discount on your first order by registering on the SailRACE community.

CERTIFIED SUPPORT

Get support by officially certified experts. Detail us your refitting needs and we will help you determining the best solution.

Detailed Information

Waterproof, robust and accurate.

For correction and 100% reliability of the wind vane
nke has developed this new waterproof sensor for the measurement of rotating masts and rudder angles.

Specifications

Power supply	10 to 16V DC
Consumption	15mA
Waterproofing	IP67 for the sensor, IP54 for the interface
Weight	450 gr (arm) 480 gr (sheave)
Operating temperature	-10 ° C à +50 ° C
Storage temperature	-20 ° C à +60 ° C
Measurement range	-170 ° à +170 °
Resolution	0.1 °
Linearity	2%
Comes with	a 3m cable, interface, arm and sheave.

Features

The autopilot requires an accurate measurement for rudder angle. This waterproof sensor can be installed in many different ways.

This sensor is mounted at the mast base where it is generally very exposed to water. It has been designed to withstand waves across the deck and has been successfully tested in the harsh working environments onboard Open 60s and Mini Transats.

It can be supplied with a sheave or an arm depending on the mechanical installation options you choose. Data is sent to the bus via an interface junction box included in the pack.

Installations with a sheave require a setup value which relate to the difference in diameters between the two sheaves.