{"product_id":"garmin-gmr-25342536-xhd3","title":"Garmin GMR 2534\/2536 xHD3","description":"\u003cp\u003eThese rugged 4-foot and 6-foot open antenna radars, which combine high-definition images with Garmin's latest platform technology, offer superior detection of weather conditions, obstacles and traffic for navigators fishing or sailing on the high seas.\u003c\/p\u003e\n\u003cp\u003eNew exploration media technology\u003c\/p\u003e\n\u003cp\u003eThe scanning average, a first in Garmin radars, helps reduce the sea filter and interference to improve the detection and visualization of consistent targets.\u003c\/p\u003e\n\u003cp\u003eAngular adjustment of the size of the lens\u003c\/p\u003e\n\u003cp\u003eThe expanded pulse and angular processing techniques of the size of the lens optimize the shapes of the objects on the screen to improve interpretation on all range scales.\u003c\/p\u003e\n\u003cp\u003eHIGH-PERFORMANCE Antennas\u003c\/p\u003e\n\u003cp\u003eThe open antennas with wind rating of 100 knots1 have rotation speeds of 24 and 48 RPM to increase the delay speed, with a maximum range of up to 96 nautical miles in the 25 kW versions (up to 72 nautical miles in the 4 and 12 kW versions).\u003c\/p\u003e\n\u003cp\u003eReal echo FOLLOW-UPS\u003c\/p\u003e\n\u003cp\u003eThe screen shows a historical \"traw\" of the navigation of the boats, which eliminates the influence of relative movement to help you quickly identify moving targets and possible collision threats.\u003c\/p\u003e\n\u003cp\u003eDual scale with radar overlay\u003c\/p\u003e\n\u003cp\u003eThe simple radar antenna has the ability to provide split-screen images on your compatible plotter in parallel, with independent controls and range settings for both short and long range. You can superimpose one or both scopes on a card.\u003c\/p\u003e\n\u003cp\u003eDynamic automatic gain\u003c\/p\u003e\n\u003cp\u003eThe gain levels are automatically adjusted to the optimal configuration for ports, areas near the coast and the high seas.\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr class=\"title\"\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003ch4\u003ePhysical and performance characteristics\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions of the Unit (WIDTH\/HEIGHT\/DEPTH)\u003c\/th\u003e\n\u003ctd\u003e1.2-meter (4-foot) antenna: 1325 X 122 X 170 mm (52.2′′ X 4.8′′ X 6.7′′)\u003cbr\u003e\n1.8-meter (6-foot) antenna: 1938 X 122 X 170 mm (76.5′′ X 4.8′′ X 6.7′′)\u003cbr\u003e\nPedestal: 520 X 328 X 314 mm (20.5′′ X 12.9′′ X 12.4′′)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAntenna of 1.2 meters (4 feet) and pedestal: 27.6 kg\u003cbr\u003e\nAntenna of 1.8 meters (6 feet) and pedestal: 29.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWater Resistance Classification\u003c\/th\u003e\n\u003ctd\u003eIPX6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaximum Wind Load\u003c\/th\u003e\n\u003ctd\u003e80 kt (100 kt with the update of the optional voltage converter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLength of the Antenna\u003c\/th\u003e\n\u003ctd\u003e1.2-meter (4-foot) antenna: 122 cm (48′′)\u003cbr\u003e\nAntenna of 1.8 meters (6 feet): 183 cm (72′′)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange of the Antenna\u003c\/th\u003e\n\u003ctd\u003e24 y 48 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAnchura del Haz\u003c\/th\u003e\n\u003ctd\u003e1.2-meter (4-foot) antenna: 1.8° horizontal, 23° vertical\u003cbr\u003e\n1.8-meter (6-foot) antenna: 1.1° horizontal, 23° vertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaximum Scale\u003c\/th\u003e\n\u003ctd\u003e72 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum Scale\u003c\/th\u003e\n\u003ctd\u003e20 meters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType of Radar\u003c\/th\u003e\n\u003ctd\u003eOpen antenna\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr class=\"title\"\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003ch4\u003eElectric\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFeeding Input\u003c\/th\u003e\n\u003ctd\u003e11-32 V cc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEnergy Consumption, on Hold\u003c\/th\u003e\n\u003ctd\u003e18 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTypical Energy Consumption, Transmitting (in Normal Mode)\u003c\/th\u003e\n\u003ctd\u003e55 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTransmission Power\u003c\/th\u003e\n\u003ctd\u003e4 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr class=\"title\"\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003ch4\u003e\u003cb\u003eRadar functions\u003c\/b\u003e\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDual Scale\u003c\/th\u003e\n\u003ctd class=\"yes\"\u003e\u003cb\u003eYes\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuperimposition\u003c\/th\u003e\n\u003ctd class=\"yes\"\u003e\u003cb\u003eYes\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatibility with Dual Radars\u003c\/th\u003e\n\u003ctd class=\"yes\"\u003e\u003cb\u003eYes\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuto Bird Gain\u003c\/th\u003e\n\u003ctd class=\"yes\"\u003e\u003cb\u003eYes\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAutomatic Profit\u003c\/th\u003e\n\u003ctd\u003e\u003cb\u003eDynamic\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTarget Tracking Marpa (to Avoid Collisions)\u003c\/th\u003e\n\u003ctd\u003e\u003cb\u003eYes (requires a direction sensor, sold separately)\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEcho Tracking\u003c\/th\u003e\n\u003ctd\u003e\u003cb\u003eTrue\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProgrammable Antenna Parking\u003c\/th\u003e\n\u003ctd class=\"yes\"\u003e\u003cb\u003eYes\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTarget Size\u003c\/th\u003e\n\u003ctd class=\"yes\"\u003e\u003cb\u003eYes\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003e\u003cspan style=\"color: #333333;font-size: 14.4px\"\u003e\u003cb\u003eExploration Medi\u003c\/b\u003eA\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"text-align: center\"\u003e\n\u003c\/p\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=ec0a294984dad739966599db1fba160d71f5a6a076850e55ab5c833d23ec6bc5 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eHow should the ground wire be connected for proper installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eConnect the 12 AWG copper wire to the ground connector on the pedestal using the pre-installed crimp connector, and coat with marine sealant.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should cable passage holes be sealed during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eApply marine sealant to all holes after cables are in place to ensure a waterproof seal, including where grommets are used.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat safety precautions should be observed during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDo not look directly at the antenna at close range when transmitting, and keep the radar out of range of people to avoid exposure to harmful RF levels.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should you handle cable routing holes for waterproofing?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eApply marine sealant to cable routing holes after cables are installed to ensure a waterproof seal.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the correct tightening torque for the radar mounting hardware?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTighten the hex nuts to 14.7 N-m (11 lbf-ft) for securing the radar to the mounting surface.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the power cable’s fuse be handled?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDo not remove the in-line fuse holder; the appropriate fuse must always be in place for safety and warranty.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the procedure for connecting directly to DC power?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eConnect the power cable directly to the battery (11–32 VDC) with the in-line fuse and connect to the radar’s POWER port.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat size hole should be drilled for routing cables?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDrill a pass-through hole using a 32 mm (1-1\/4 in.) bit for the cables as indicated on the mounting template.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould the supplied mounting template be used?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, only use the provided template; improper printing or scaling may result in a miscut on the mounting surface.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the power cable be extended? If so, what wire gauge is required?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, if you need to extend the power cable use the correct wire gauge for your length: e.g., 12 AWG for 3 m (9 ft. 10 in.), 10 AWG for 5 m (16 ft. 4 in.).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do you access the power and network connectors?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eLoosen the captive screw on the access panel with a flat screwdriver, then lift the panel up and away from the pedestal housing.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the radar’s power cable be routed?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eRoute the power cable as close as possible to the battery source. If extension is needed, use the correct wire gauge for cable length.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"How should the ground wire be connected for proper installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Connect the 12 AWG copper wire to the ground connector on the pedestal using the pre-installed crimp connector, and coat with marine sealant.\"}}, {\"@type\": \"Question\", \"name\": \"How should cable passage holes be sealed during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Apply marine sealant to all holes after cables are in place to ensure a waterproof seal, including where grommets are used.\"}}, {\"@type\": \"Question\", \"name\": \"What safety precautions should be observed during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Do not look directly at the antenna at close range when transmitting, and keep the radar out of range of people to avoid exposure to harmful RF levels.\"}}, {\"@type\": \"Question\", \"name\": \"How should you handle cable routing holes for waterproofing?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Apply marine sealant to cable routing holes after cables are installed to ensure a waterproof seal.\"}}, {\"@type\": \"Question\", \"name\": \"What is the correct tightening torque for the radar mounting hardware?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Tighten the hex nuts to 14.7 N-m (11 lbf-ft) for securing the radar to the mounting surface.\"}}, {\"@type\": \"Question\", \"name\": \"How should the power cable’s fuse be handled?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Do not remove the in-line fuse holder; the appropriate fuse must always be in place for safety and warranty.\"}}, {\"@type\": \"Question\", \"name\": \"What is the procedure for connecting directly to DC power?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Connect the power cable directly to the battery (11–32 VDC) with the in-line fuse and connect to the radar’s POWER port.\"}}, {\"@type\": \"Question\", \"name\": \"What size hole should be drilled for routing cables?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Drill a pass-through hole using a 32 mm (1-1\/4 in.) bit for the cables as indicated on the mounting template.\"}}, {\"@type\": \"Question\", \"name\": \"Should the supplied mounting template be used?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, only use the provided template; improper printing or scaling may result in a miscut on the mounting surface.\"}}, {\"@type\": \"Question\", \"name\": \"Can the power cable be extended? If so, what wire gauge is required?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, if you need to extend the power cable use the correct wire gauge for your length: e.g., 12 AWG for 3 m (9 ft. 10 in.), 10 AWG for 5 m (16 ft. 4 in.).\"}}, {\"@type\": \"Question\", \"name\": \"How do you access the power and network connectors?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Loosen the captive screw on the access panel with a flat screwdriver, then lift the panel up and away from the pedestal housing.\"}}, {\"@type\": \"Question\", \"name\": \"How should the radar’s power cable be routed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Route the power cable as close as possible to the battery source. If extension is needed, use the correct wire gauge for cable length.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"K10-00012-28","offer_id":53273071288657,"sku":"K10-00012-28","price":735400.0,"currency_code":"AFN","in_stock":false},{"title":"K10-00012-29","offer_id":53273071321425,"sku":"K10-00012-29","price":786300.0,"currency_code":"AFN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/cf-lg_eb3bc75e-0b35-4869-9da5-3e030d5ffa7e.jpg?v=1773336524","url":"https:\/\/www.sailrace.com\/products\/garmin-gmr-25342536-xhd3","provider":"SailRACE","version":"1.0","type":"link"}