{"product_id":"harken-performa-electric-st-alum-winch-with-dual-function-control-box","title":"Harken Performa Electric ST Alum Winch with Dual Function Control Box","description":"\u003c!-- harken-grouped-shared:v4 --\u003e\u003ch3\u003eKey details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type\u003c\/strong\u003e: Performa Electric ST Alum Winch with Dual Function Control Box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions\u003c\/strong\u003e: Model, Voltage, Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable variants\u003c\/strong\u003e: 18\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eAll Performa™ winches feature sandblasted drums optimized for halyard and sheeting applications using small-diameter, high-tech line. Electric Performa winches let you trim any size sail with the push of a button.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cp\u003eSpecifications vary by the selected variant. Use the variant table below to compare the available configurations and part numbers.\u003c\/p\u003e\u003cdiv class=\"harken-variant-details\"\u003e\n\u003ch3\u003eVariant details\u003c\/h3\u003e\n\u003cp\u003eSelect the option combination that matches the required part number.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003cth\u003eMount\u003c\/th\u003e\n\u003cth\u003ePart No.\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e12 V\u003c\/td\u003e\n\u003ctd\u003eHorizontal\u003c\/td\u003e\n\u003ctd\u003e60.3STEP12H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e12 V\u003c\/td\u003e\n\u003ctd\u003eHorizontal (Left Mount)\u003c\/td\u003e\n\u003ctd\u003e60.3STEP12HLM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e12 V\u003c\/td\u003e\n\u003ctd\u003eVertical\u003c\/td\u003e\n\u003ctd\u003e60.3STEP12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e24 V\u003c\/td\u003e\n\u003ctd\u003eHorizontal\u003c\/td\u003e\n\u003ctd\u003e60.3STEP24H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e24 V\u003c\/td\u003e\n\u003ctd\u003eHorizontal (Left Mount)\u003c\/td\u003e\n\u003ctd\u003e60.3STEP24HLM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e24 V\u003c\/td\u003e\n\u003ctd\u003eVertical\u003c\/td\u003e\n\u003ctd\u003e60.3STEP24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e12 V\u003c\/td\u003e\n\u003ctd\u003eHorizontal\u003c\/td\u003e\n\u003ctd\u003e70.3STEP12H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e12 V\u003c\/td\u003e\n\u003ctd\u003eHorizontal (Left Mount)\u003c\/td\u003e\n\u003ctd\u003e70.3STEP12HLM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e12 V\u003c\/td\u003e\n\u003ctd\u003eVertical\u003c\/td\u003e\n\u003ctd\u003e70.3STEP12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e24 V\u003c\/td\u003e\n\u003ctd\u003eHorizontal\u003c\/td\u003e\n\u003ctd\u003e70.3STEP24H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e24 V\u003c\/td\u003e\n\u003ctd\u003eHorizontal (Left Mount)\u003c\/td\u003e\n\u003ctd\u003e70.3STEP24HLM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e24 V\u003c\/td\u003e\n\u003ctd\u003eVertical\u003c\/td\u003e\n\u003ctd\u003e70.3STEP24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003ctd\u003e12 V\u003c\/td\u003e\n\u003ctd\u003eHorizontal\u003c\/td\u003e\n\u003ctd\u003e80.3STEP12H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003ctd\u003e12 V\u003c\/td\u003e\n\u003ctd\u003eHorizontal (Left Mount)\u003c\/td\u003e\n\u003ctd\u003e80.3STEP12HLM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003ctd\u003e12 V\u003c\/td\u003e\n\u003ctd\u003eVertical\u003c\/td\u003e\n\u003ctd\u003e80.3STEP12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003ctd\u003e24 V\u003c\/td\u003e\n\u003ctd\u003eHorizontal\u003c\/td\u003e\n\u003ctd\u003e80.3STEP24H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003ctd\u003e24 V\u003c\/td\u003e\n\u003ctd\u003eHorizontal (Left Mount)\u003c\/td\u003e\n\u003ctd\u003e80.3STEP24HLM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003ctd\u003e24 V\u003c\/td\u003e\n\u003ctd\u003eVertical\u003c\/td\u003e\n\u003ctd\u003e80.3STEP24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\u003c!-- \/harken-grouped-shared --\u003e\u003c!-- sr-faq v=1 vendor=harken source_sha256=f5e15b45f90565e4a25978b18ab04b7ce14ef1cd8923fd07c3de4145ffdf0704 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the warranty on the Harken Performa winch?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe product includes a limited worldwide warranty; details are in the installation and maintenance manual.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the recommended installation surface strength for the winch?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe winch must be installed on a flat area of the deck, reinforced if necessary to bear a load at least twice the maximum working load of the winch.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the recommended torque for tightening hex screws during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eHex screws should be tightened to 20Nm (177 in-lb) during assembly procedures.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the recommended torque for tightening the hex screws during winch installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eWhen assembling, tighten the six hex screws with a torque of 20 Nm (177 in-lb) during installation steps involving these screws.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow often should the winch be disassembled for maintenance?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIt should be completely overhauled, cleaned, and lubricated at least every 12 months, or sooner if signs of wear are noted.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat precautions should be taken regarding the sheet entry angle during winch installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe sheet entry angle must be 8° with a tolerance of ±2° to avoid overrides that can damage the winch or make it inoperable, causing loss of control.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat maintenance is required regarding washing the winch?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eWash the winch frequently with fresh water after each use. Avoid caustic cleaners, solvents, polishes, or abrasive pastes on anodized, chrome, or plastic parts.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the recommended lubrication practice for pawls during winch maintenance?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003ePawls and springs should be lightly lubricated with oil only, and no grease should be applied to pawls.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre countersunk bolts recommended for winch installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eNo, countersunk bolts must not be used when mounting the winch on the deck.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat surface strength is recommended for installing the winch on deck?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe winch must be installed on a flat deck area reinforced to bear at least twice the maximum working load of the winch.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the required load bearing capacity for the deck where the winch is installed?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe deck must be reinforced to bear at least twice the maximum working load of the winch to ensure safety.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat type of bolts should be used to install the winch on the deck?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eUse only A4 stainless steel (DIN 267 part11) bolts to install the winch. Bolts of other materials may corrode or lack strength, risking sudden deck failure.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat types of bolts should be used to install the winch on the deck?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eUse only A4 stainless steel bolts (DIN 267 part11). Other materials may corrode or lack strength, risking winch failure causing injury or death.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat materials should be used for winch mounting bolts?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eOnly use A4 stainless steel bolts (DIN 267 part11) for installing the winch to prevent corrosion and ensure strength.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat material is recommended for the winch mounting bolts and why?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA4 stainless steel bolts are recommended to provide sufficient strength and corrosion resistance, preventing sudden deck failure under high loads.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the specified entry angle for the sheet while installing the winch?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe entry angle of the sheet must be 8° with a tolerance of ±2° to avoid sheet overrides that can damage the winch or cause it to malfunction.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow many mounting fasteners are required for installing the winch?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe winch requires six M8 socket head or hexagonal headed bolts to be securely mounted to the deck, chosen to suit the deck thickness and type.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow many fasteners are required to install the Harken Performa 60.3 ST Winch?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe winch must be bolted to the deck using six M8 bolts, either Socket Head (SH) or hexagonal headed, correctly chosen for the boat deck thickness and type.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhere should the winch drive gear be positioned when installing?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMount the winch so the drive gear is positioned where the sheet enters the winch drum to avoid weakening the winch and potential failure causing injury.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the maximum working load (MWL) of the Harken Performa 60.3 ST winch?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe maximum working load (MWL) for the 60.3 ST Performa™ Winch is 1800 Kg (3968 lb). Exceeding this load can cause winch failure and serious injury.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat tool is recommended for tightening motor cable terminals to avoid over tightening?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA torque wrench is recommended to obtain a tightening torque no greater than 10 Nm (88 in-lb) for motor cable terminal nuts.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the winch be cleaned after use?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eWash the winch frequently with fresh water after each use, avoiding teak cleaners or caustic products. Do not use solvents or abrasive pastes on anodized or plastic parts.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow often should a complete overhaul of the winch be done?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eComplete overhaul, cleaning, and lubrication should be performed at least every 12 months, with visual inspections at start and end of sailing or racing seasons.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the specified power ratio for the first speed gear of the winch?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe theoretical power ratio for the 1st speed gear is 9.2:1.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is the warranty on the Harken Performa winch?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The product includes a limited worldwide warranty; details are in the installation and maintenance manual.\"}}, {\"@type\": \"Question\", \"name\": \"What is the recommended installation surface strength for the winch?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The winch must be installed on a flat area of the deck, reinforced if necessary to bear a load at least twice the maximum working load of the winch.\"}}, {\"@type\": \"Question\", \"name\": \"What is the recommended torque for tightening hex screws during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Hex screws should be tightened to 20Nm (177 in-lb) during assembly procedures.\"}}, {\"@type\": \"Question\", \"name\": \"What is the recommended torque for tightening the hex screws during winch installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"When assembling, tighten the six hex screws with a torque of 20 Nm (177 in-lb) during installation steps involving these screws.\"}}, {\"@type\": \"Question\", \"name\": \"How often should the winch be disassembled for maintenance?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It should be completely overhauled, cleaned, and lubricated at least every 12 months, or sooner if signs of wear are noted.\"}}, {\"@type\": \"Question\", \"name\": \"What precautions should be taken regarding the sheet entry angle during winch installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The sheet entry angle must be 8° with a tolerance of ±2° to avoid overrides that can damage the winch or make it inoperable, causing loss of control.\"}}, {\"@type\": \"Question\", \"name\": \"What maintenance is required regarding washing the winch?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Wash the winch frequently with fresh water after each use. Avoid caustic cleaners, solvents, polishes, or abrasive pastes on anodized, chrome, or plastic parts.\"}}, {\"@type\": \"Question\", \"name\": \"What is the recommended lubrication practice for pawls during winch maintenance?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Pawls and springs should be lightly lubricated with oil only, and no grease should be applied to pawls.\"}}, {\"@type\": \"Question\", \"name\": \"Are countersunk bolts recommended for winch installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, countersunk bolts must not be used when mounting the winch on the deck.\"}}, {\"@type\": \"Question\", \"name\": \"What surface strength is recommended for installing the winch on deck?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The winch must be installed on a flat deck area reinforced to bear at least twice the maximum working load of the winch.\"}}, {\"@type\": \"Question\", \"name\": \"What is the required load bearing capacity for the deck where the winch is installed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The deck must be reinforced to bear at least twice the maximum working load of the winch to ensure safety.\"}}, {\"@type\": \"Question\", \"name\": \"What type of bolts should be used to install the winch on the deck?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Use only A4 stainless steel (DIN 267 part11) bolts to install the winch. Bolts of other materials may corrode or lack strength, risking sudden deck failure.\"}}, {\"@type\": \"Question\", \"name\": \"What types of bolts should be used to install the winch on the deck?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Use only A4 stainless steel bolts (DIN 267 part11). Other materials may corrode or lack strength, risking winch failure causing injury or death.\"}}, {\"@type\": \"Question\", \"name\": \"What materials should be used for winch mounting bolts?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Only use A4 stainless steel bolts (DIN 267 part11) for installing the winch to prevent corrosion and ensure strength.\"}}, {\"@type\": \"Question\", \"name\": \"What material is recommended for the winch mounting bolts and why?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A4 stainless steel bolts are recommended to provide sufficient strength and corrosion resistance, preventing sudden deck failure under high loads.\"}}, {\"@type\": \"Question\", \"name\": \"What is the specified entry angle for the sheet while installing the winch?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The entry angle of the sheet must be 8° with a tolerance of ±2° to avoid sheet overrides that can damage the winch or cause it to malfunction.\"}}, {\"@type\": \"Question\", \"name\": \"How many mounting fasteners are required for installing the winch?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The winch requires six M8 socket head or hexagonal headed bolts to be securely mounted to the deck, chosen to suit the deck thickness and type.\"}}, {\"@type\": \"Question\", \"name\": \"How many fasteners are required to install the Harken Performa 60.3 ST Winch?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The winch must be bolted to the deck using six M8 bolts, either Socket Head (SH) or hexagonal headed, correctly chosen for the boat deck thickness and type.\"}}, {\"@type\": \"Question\", \"name\": \"Where should the winch drive gear be positioned when installing?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Mount the winch so the drive gear is positioned where the sheet enters the winch drum to avoid weakening the winch and potential failure causing injury.\"}}, {\"@type\": \"Question\", \"name\": \"What is the maximum working load (MWL) of the Harken Performa 60.3 ST winch?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The maximum working load (MWL) for the 60.3 ST Performa™ Winch is 1800 Kg (3968 lb). Exceeding this load can cause winch failure and serious injury.\"}}, {\"@type\": \"Question\", \"name\": \"What tool is recommended for tightening motor cable terminals to avoid over tightening?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A torque wrench is recommended to obtain a tightening torque no greater than 10 Nm (88 in-lb) for motor cable terminal nuts.\"}}, {\"@type\": \"Question\", \"name\": \"How should the winch be cleaned after use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Wash the winch frequently with fresh water after each use, avoiding teak cleaners or caustic products. Do not use solvents or abrasive pastes on anodized or plastic parts.\"}}, {\"@type\": \"Question\", \"name\": \"How often should a complete overhaul of the winch be done?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Complete overhaul, cleaning, and lubrication should be performed at least every 12 months, with visual inspections at start and end of sailing or racing seasons.\"}}, {\"@type\": \"Question\", \"name\": \"What is the specified power ratio for the first speed gear of the winch?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The theoretical power ratio for the 1st speed gear is 9.2:1.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Harken","offers":[{"title":"60 \/ 12 V \/ Horizontal","offer_id":53107224314193,"sku":"60.3STEP12H","price":10792.43,"currency_code":"EUR","in_stock":true},{"title":"60 \/ 12 V \/ Horizontal (Left Mount)","offer_id":53107224346961,"sku":"60.3STEP12HLM","price":10792.43,"currency_code":"EUR","in_stock":true},{"title":"60 \/ 12 V \/ Vertical","offer_id":53107224379729,"sku":"60.3STEP12V","price":10792.43,"currency_code":"EUR","in_stock":true},{"title":"60 \/ 24 V \/ Horizontal","offer_id":53107224412497,"sku":"60.3STEP24H","price":10792.43,"currency_code":"EUR","in_stock":true},{"title":"60 \/ 24 V \/ Horizontal (Left Mount)","offer_id":53107224445265,"sku":"60.3STEP24HLM","price":10792.43,"currency_code":"EUR","in_stock":true},{"title":"60 \/ 24 V \/ Vertical","offer_id":53107224478033,"sku":"60.3STEP24V","price":10792.43,"currency_code":"EUR","in_stock":true},{"title":"70 \/ 12 V \/ Horizontal","offer_id":53107224510801,"sku":"70.3STEP12H","price":13091.79,"currency_code":"EUR","in_stock":true},{"title":"70 \/ 12 V \/ Horizontal (Left Mount)","offer_id":53107224543569,"sku":"70.3STEP12HLM","price":13091.79,"currency_code":"EUR","in_stock":true},{"title":"70 \/ 12 V \/ Vertical","offer_id":53107224576337,"sku":"70.3STEP12V","price":13091.79,"currency_code":"EUR","in_stock":true},{"title":"70 \/ 24 V \/ Horizontal","offer_id":53107224609105,"sku":"70.3STEP24H","price":13091.79,"currency_code":"EUR","in_stock":true},{"title":"70 \/ 24 V \/ Horizontal (Left Mount)","offer_id":53107224641873,"sku":"70.3STEP24HLM","price":13091.79,"currency_code":"EUR","in_stock":true},{"title":"70 \/ 24 V \/ Vertical","offer_id":53107224674641,"sku":"70.3STEP24V","price":13091.79,"currency_code":"EUR","in_stock":true},{"title":"80 \/ 12 V \/ Horizontal","offer_id":53107224707409,"sku":"80.3STEP12H","price":23083.38,"currency_code":"EUR","in_stock":true},{"title":"80 \/ 12 V \/ Horizontal (Left Mount)","offer_id":53107224740177,"sku":"80.3STEP12HLM","price":23083.38,"currency_code":"EUR","in_stock":true},{"title":"80 \/ 12 V \/ Vertical","offer_id":53107224772945,"sku":"80.3STEP12V","price":23083.38,"currency_code":"EUR","in_stock":true},{"title":"80 \/ 24 V \/ Horizontal","offer_id":53107224805713,"sku":"80.3STEP24H","price":23083.38,"currency_code":"EUR","in_stock":true},{"title":"80 \/ 24 V \/ Horizontal (Left Mount)","offer_id":53107224838481,"sku":"80.3STEP24HLM","price":23083.38,"currency_code":"EUR","in_stock":true},{"title":"80 \/ 24 V \/ Vertical","offer_id":53107224871249,"sku":"80.3STEP24V","price":23083.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/457291c4-57c9-4277-aeae-2f921706172b.jpg?v=1771754481","url":"https:\/\/www.sailrace.com\/products\/harken-performa-electric-st-alum-winch-with-dual-function-control-box","provider":"SailRACE","version":"1.0","type":"link"}