Garmin VHF handheld device with GHS 11i cable

2024-05-15T19:03:41+02:00

Fornecedor Garmin
Tipo:
Preço: 234.64

The GHS 11i enables the full operation of the VHF 210i radio from remote locations. It does not include complex components and has a simple design with multifunction buttons, a 2.7"-inch diagonal dot matrix screen and a coiled cable that extends from 30 cm (1 ft) to almost 1.5 m (5 ft).

It has a rotating/button to control the volume, the squelch and the selection of channels. The exclusive button will offer you easy access to 16/9 channels. All the buttons are similar to those of the VHF radio.

In addition, the GHS 11i includes a microphone with intercom functions when connected to a speaker.

Specifications:

Dimensions: 6.9 X 15.4 X 4.0 cm

Weight: 0.7 lb (0.3 kg)

Cable length: 30 cm coiled (1.5 m extended)

Safety distance of the compass: 66 cm (26 inches)

Screen: backlit LCD

Built-in microphone and speaker: yes

16/9 or 16+ channel button: yes

Languages: English, French, Italian, German and Spanish

Operating temperature range: from -15 °C to 70 °C

Water resistance rating: IPX7

FAQs

Is marine sealant required for installation?

Marine sealant is optional but recommended to help seal mounting holes and cable entry points.

How do you apply marine sealant during installation?

Apply marine sealant between the mounting plate and the mounting surface to help seal the holes if desired.

Can the extension cable connector be fed through the mounting surface?

Feed the extension cable connector through the back of the mounting surface during installation.

Which tools are required for installation?

Installation requires a pencil, drill, 22 mm drill bit, 3 mm drill bit, 4.76 mm wrench, Phillips screwdriver, and optionally marine sealant.

Is there a minimum distance from a compass required for mounting?

To avoid interference, do not install the handset closer than 70 cm (27.5 in.) to a compass.

What hardware is included for mounting?

The package includes screws to mount the handset connector and cradle; use appropriate hardware for your surface if needed.

Which mounting hardware is included with the device?

You can use the included screws to mount the handset connector and the handset cradle mount on your boat.