{"title":"Морские датчики ","description":"","products":[{"product_id":"garmin-gra-10","title":"Garmin GRA 10","description":"\u003cp\u003eWith the Garmin NMEA 2000 analog rudder angle adapter on your boat, you can give new life to your old indicators and make the transition from an analog to a digital system. The easy-to-use adapter collects the data generated by traditional analog indicators and converts the data into an NMEA 2000 signal so that you can create and expand your network without replacing all the boat's equipment.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eConnect to your network\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eWith the Garmin GRA 10 adapter, you can convert the analog information provided by the rudder angle sensor (not included) of the boat and send it to the NMEA 2000 network. Thanks to the GRA 10 adapter, you will be able to observe the rudder angle information on the compatible Garmin screens that you have connected to the NMEA 2000 network.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSimple update\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eGarmin's NMEA 2000 range of analog adapters is easy to add to an existing marine network. Once installed, the adapter data can be viewed through the Garmin GMI 10 digital nautical display and other compatible Garmin devices. The ease of installation will help you move your old controls to the digital age.\u003c\/p\u003e \u003ch3\u003eFeatures:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDimensions of the unit, width X height X depth: 31\/32\" X 43\/64\" X 3 3\/32\" (24.7 X 17 X 78.6 mm)\u003c\/li\u003e \u003cli\u003eTotal cable length: 16 ft (4.9 m)\u003c\/li\u003e \u003cli\u003eTemperature range: from 5 °F to 158 °F (from -15 °C to 70 °C)\u003c\/li\u003e \u003cli\u003eSafety distance of the compass: 2 in (5 cm)\u003c\/li\u003e \u003cli\u003ePower supply: 9–16 V of DC from the NMEA 2000 communications link\u003c\/li\u003e \u003cli\u003ePower consumption NMEA 2000: 1.1 W max.\u003c\/li\u003e \u003cli\u003eLoad equivalence number (LEN) NMEA 2000: 2 (100 mA)\u003c\/li\u003e \u003c\/ul\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=20c47044643067b0a99a947df101e3a3eb2eb28901daa1cb978637167b05ac5d --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWhat tools or supplies are needed for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYou may need heat-shrink tubing, a heat gun, cable ties, and additional NMEA 2000 cabling and connectors (optional).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the safe installation distance from a compass?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eInstall the adapter at least 2 in. (5 cm) from a magnetic compass to prevent interference.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat safety precautions are advised during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eWear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the GRA 10 be mounted where it is submerged?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDo not install where it is submerged regularly; suitable for areas subject to wash-down, but not for continuous submersion.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is required to wire the GRA 10 to an analog gauge or sensor?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eWire the GRA 10 using the provided harness; do not remove any wires from the back of the gauge or sensor.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow is the GRA 10 connected to the NMEA 2000 network?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eConnect to the backbone via an included T-connector; if more distance is needed, use a drop cable up to 20 ft. (6 m).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow is rudder angle calibration performed with the GRA 10?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eCalibration is done via a compatible Garmin display device through the NMEA 2000 Devices list and on-screen steps.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat power input does the GRA 10 require?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe adapter requires 9–16 Vdc from the NMEA 2000 bus for power input.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the power consumption of the GRA 10 on the NMEA 2000 network?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe maximum power usage is 1.1 W, with a Load Equivalency Number (LEN) of 2 (100 mA) on the NMEA 2000 network.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What tools or supplies are needed for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"You may need heat-shrink tubing, a heat gun, cable ties, and additional NMEA 2000 cabling and connectors (optional).\"}}, {\"@type\": \"Question\", \"name\": \"What is the safe installation distance from a compass?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Install the adapter at least 2 in. (5 cm) from a magnetic compass to prevent interference.\"}}, {\"@type\": \"Question\", \"name\": \"What safety precautions are advised during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.\"}}, {\"@type\": \"Question\", \"name\": \"Can the GRA 10 be mounted where it is submerged?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Do not install where it is submerged regularly; suitable for areas subject to wash-down, but not for continuous submersion.\"}}, {\"@type\": \"Question\", \"name\": \"What is required to wire the GRA 10 to an analog gauge or sensor?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Wire the GRA 10 using the provided harness; do not remove any wires from the back of the gauge or sensor.\"}}, {\"@type\": \"Question\", \"name\": \"How is the GRA 10 connected to the NMEA 2000 network?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Connect to the backbone via an included T-connector; if more distance is needed, use a drop cable up to 20 ft. (6 m).\"}}, {\"@type\": \"Question\", \"name\": \"How is rudder angle calibration performed with the GRA 10?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Calibration is done via a compatible Garmin display device through the NMEA 2000 Devices list and on-screen steps.\"}}, {\"@type\": \"Question\", \"name\": \"What power input does the GRA 10 require?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The adapter requires 9–16 Vdc from the NMEA 2000 bus for power input.\"}}, {\"@type\": \"Question\", \"name\": \"What is the power consumption of the GRA 10 on the NMEA 2000 network?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The maximum power usage is 1.1 W, with a Load Equivalency Number (LEN) of 2 (100 mA) on the NMEA 2000 network.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626151674193,"sku":"010-11324-00","price":153.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gra-10-010-11324-00-hr-070.jpg?v=1754729772"},{"product_id":"garmin-gfl-10","title":"Garmin GFL 10","description":"\u003cp\u003eWith the Garmin NMEA 2000 analog liquid level adapter on your boat, you can give new life to your old indicators and make the transition from an analog to a digital system. The easy-to-use adapter collects the data generated by traditional analog indicators and converts the data into an NMEA 2000 signal so that you can create and expand your network without replacing all the boat's equipment.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eConnect to your network\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eWith the Garmin GFL 10 adapter, you can convert the analog information provided by the liquid level sensor (not included) of the boat and send it to the NMEA 2000 network. Thanks to the GFL 10 adapter, it is easier to observe the liquid level information on the compatible Garmin screens that you have connected to the NMEA 2000 network.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSimple update\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eGarmin's NMEA 2000 range of analog adapters is easy to add to an existing marine network. Once installed, the adapter data can be viewed through the Garmin GMI 10 digital nautical display and other compatible Garmin devices. The ease of installation will help you move your old controls to the digital age.\u003c\/p\u003e \u003ch3\u003eFeatures:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDimensions of the unit, width X height X depth: 31\/32\" X 43\/64\" X 3 3\/32\" (24.7 X 17 X 78.6 mm)\u003c\/li\u003e \u003cli\u003eWeight: 12.85 oz (365 g)\u003c\/li\u003e \u003cli\u003eTotal cable length: 16 ft (4.9 m)\u003c\/li\u003e \u003cli\u003eTemperature range: from 5 °F to 158 °F (from -15 °C to 70 °C)\u003c\/li\u003e \u003cli\u003eSafety distance of the compass: 2 in (5 cm)\u003c\/li\u003e \u003cli\u003ePower supply: 9–16 V of DC from the NMEA 2000 communications link\u003c\/li\u003e \u003cli\u003ePower consumption NMEA 2000: 1 W max.\u003c\/li\u003e \u003cli\u003eLoad equivalence number (LEN) NMEA 2000: 2 (100 mA)\u003c\/li\u003e \u003c\/ul\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=0137ffae2edc56dc71c69eeedda80624180ca8f408455f71de11d20db07d69d7 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eAre any tools or additional components required for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYou may need heat-shrink tubing, a heat gun, cable ties, and additional NMEA 2000 cabling and connectors (optional).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the compass safe distance for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eInstall the adapter at least 2 in. (5 cm) from a magnetic compass to avoid interference.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the GFL 10 be submerged during normal use?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GFL 10 is waterproof to IEC 60529 IPX7 but should not be installed where it will be submerged regularly.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do you wire the GFL 10 to an analog gauge?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eConnect the blue wire to sensor (S,G), white to gauge power (+, +12V, I, IGN), black to ground (-, G). Do not remove existing wires.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the recommended procedure when wiring to a fuel tank sensor?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eConnect the adapter to the sender before connecting to the NMEA 2000 network to reduce the risk of sparks near the tank.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do you connect the GFL 10 to a NMEA 2000 network?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eConnect the GFL 10's NMEA 2000 connector to a T-connector on the backbone; a drop cable may be used for longer distances.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat are the physical dimensions and weight of the Garmin GFL 10?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GFL 10 measures 31\/32 × 43\/64 × 3 3\/32 in. (24.7 × 17.0 × 78.6 mm) and weighs 12.85 oz. (365 g).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the maximum cable length provided with the GFL 10?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GFL 10 comes with a total cable length of 16 ft. (4.9 m).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the power source and consumption for the GFL 10?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GFL 10 uses 9–16 Vdc from the NMEA 2000 bus, with a maximum power usage of 1 W.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs the GFL 10 certified for NMEA 2000?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, the GFL 10 is NMEA 2000 certified.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Are any tools or additional components required for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"You may need heat-shrink tubing, a heat gun, cable ties, and additional NMEA 2000 cabling and connectors (optional).\"}}, {\"@type\": \"Question\", \"name\": \"What is the compass safe distance for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Install the adapter at least 2 in. (5 cm) from a magnetic compass to avoid interference.\"}}, {\"@type\": \"Question\", \"name\": \"Can the GFL 10 be submerged during normal use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GFL 10 is waterproof to IEC 60529 IPX7 but should not be installed where it will be submerged regularly.\"}}, {\"@type\": \"Question\", \"name\": \"How do you wire the GFL 10 to an analog gauge?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Connect the blue wire to sensor (S,G), white to gauge power (+, +12V, I, IGN), black to ground (-, G). Do not remove existing wires.\"}}, {\"@type\": \"Question\", \"name\": \"What is the recommended procedure when wiring to a fuel tank sensor?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Connect the adapter to the sender before connecting to the NMEA 2000 network to reduce the risk of sparks near the tank.\"}}, {\"@type\": \"Question\", \"name\": \"How do you connect the GFL 10 to a NMEA 2000 network?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Connect the GFL 10's NMEA 2000 connector to a T-connector on the backbone; a drop cable may be used for longer distances.\"}}, {\"@type\": \"Question\", \"name\": \"What are the physical dimensions and weight of the Garmin GFL 10?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GFL 10 measures 31\/32 × 43\/64 × 3 3\/32 in. (24.7 × 17.0 × 78.6 mm) and weighs 12.85 oz. (365 g).\"}}, {\"@type\": \"Question\", \"name\": \"What is the maximum cable length provided with the GFL 10?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GFL 10 comes with a total cable length of 16 ft. (4.9 m).\"}}, {\"@type\": \"Question\", \"name\": \"What is the power source and consumption for the GFL 10?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GFL 10 uses 9–16 Vdc from the NMEA 2000 bus, with a maximum power usage of 1 W.\"}}, {\"@type\": \"Question\", \"name\": \"Is the GFL 10 certified for NMEA 2000?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, the GFL 10 is NMEA 2000 certified.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626152558929,"sku":"010-11326-00","price":153.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gra-10-010-11324-00-hr-070_2191b5ad-4db1-44f2-ade4-9ac9c658cc57.jpg?v=1754729780"},{"product_id":"garmin-gst-10","title":"Garmin GST 10","description":"\u003cp\u003eWith the Garmin analog adapter for speed in the water and generic temperature NMEA 2000 on your boat, you can give new life to your old indicators and make the transition from an analog to a digital system. The easy-to-use adapter collects the data generated by traditional analog indicators and converts the data into an NMEA 2000 signal so that you can create and expand your network without replacing all the boat's equipment.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eConnect to your network\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eWith the Garmin GST 10 adapter, you can convert the analog information provided by a compatible water speed sensor, water temperature sensor or combined water speed and water temperature sensor (not included) of the boat and send it to the NMEA 2000 network. Thanks to the GST 10 adapter, it is easier to observe the information of water speed and water temperature on the compatible Garmin screens that you have connected to the NMEA 2000 network.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSimple update\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eGarmin's NMEA 2000 range of analog adapters is easy to add to an existing marine network. Once installed, the adapter data can be viewed through the Garmin GMI 10 digital nautical display and other compatible Garmin devices. The ease of installation will help you move your old controls to the digital age.\u003c\/p\u003e \u003ch3\u003eFeatures:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDimensions of the unit, width X height X depth: 31\/32\" X 43\/64\" X 3 3\/32\" (24.7 X 17 X 78.6 mm)\u003c\/li\u003e \u003cli\u003eWeight: 13.33 oz (380 g)\u003c\/li\u003e \u003cli\u003eTotal cable length: 16 ft (4.9 m)\u003c\/li\u003e \u003cli\u003eTemperature range: from 5 °F to 158 °F (from -15 °C to 70 °C)\u003c\/li\u003e \u003cli\u003eSafety distance of the compass: 2 in (5 cm)\u003c\/li\u003e \u003cli\u003ePower supply: 9–16 V of DC from the NMEA 2000 communications link\u003c\/li\u003e \u003cli\u003eNMEA 2000 electricity consumption: 0.9 W max.\u003c\/li\u003e \u003cli\u003eLoad equivalence number (LEN) NMEA 2000: 1 (50 mA)\u003c\/li\u003e \u003c\/ul\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=466244d945c72405f8342c787ddb630cef4b645a5feefa0cde4e1ec35dd7fe6e --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWhat accessories or tools are needed for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eCable ties and extra NMEA 2000 cabling\/connectors may be required; screws for mounting are also not included.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do you select the temperature data source for the GST 10?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAfter installation, use your Garmin display device's NMEA 2000 Devices list to select GST 10 and assign the temperature source from menu options.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan you use an extension between the GST 10 and sensor?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYou cannot extend the cable connecting the GST 10 adapter to the sensor; the adapter must be installed within 173 in (4.4 m) of the sensor.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs the GST 10 waterproof, and can it be submerged?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GST 10 is IEC 60529 IPX7 waterproof and can be submerged up to 30 minutes at 1 meter, but should not be installed where it will be submerged regularly.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do you connect the GST 10 to an existing NMEA 2000 network?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eConnect the GST 10 to your NMEA 2000 backbone using the included T-connector; only one power source should be connected to the network.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the GST 10’s maximum NMEA 2000 current draw and load equivalence number?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GST 10 has a maximum power usage of 0.9 W and a load equivalence number (LEN) of 1 (50 mA) on the NMEA 2000 network.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow is the GST 10 powered and what is its voltage range?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GST 10 receives its power from the NMEA 2000 bus with an input voltage range of 9 to 16 Vdc.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat are the GST 10’s physical dimensions and cable length?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GST 10 measures 31\/32 x 43\/64 x 3 3\/32 in. (24.7 x 17.0 x 78.6 mm) and includes a total cable length of 16 ft (4.9 m).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat temperature range can the GST 10 display?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GST 10 provides temperature readings from -22°F to 194°F (-30°C to 90°C). Readings beyond those extremes will not be displayed.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What accessories or tools are needed for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Cable ties and extra NMEA 2000 cabling\/connectors may be required; screws for mounting are also not included.\"}}, {\"@type\": \"Question\", \"name\": \"How do you select the temperature data source for the GST 10?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"After installation, use your Garmin display device's NMEA 2000 Devices list to select GST 10 and assign the temperature source from menu options.\"}}, {\"@type\": \"Question\", \"name\": \"Can you use an extension between the GST 10 and sensor?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"You cannot extend the cable connecting the GST 10 adapter to the sensor; the adapter must be installed within 173 in (4.4 m) of the sensor.\"}}, {\"@type\": \"Question\", \"name\": \"Is the GST 10 waterproof, and can it be submerged?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GST 10 is IEC 60529 IPX7 waterproof and can be submerged up to 30 minutes at 1 meter, but should not be installed where it will be submerged regularly.\"}}, {\"@type\": \"Question\", \"name\": \"How do you connect the GST 10 to an existing NMEA 2000 network?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Connect the GST 10 to your NMEA 2000 backbone using the included T-connector; only one power source should be connected to the network.\"}}, {\"@type\": \"Question\", \"name\": \"What is the GST 10’s maximum NMEA 2000 current draw and load equivalence number?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GST 10 has a maximum power usage of 0.9 W and a load equivalence number (LEN) of 1 (50 mA) on the NMEA 2000 network.\"}}, {\"@type\": \"Question\", \"name\": \"How is the GST 10 powered and what is its voltage range?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GST 10 receives its power from the NMEA 2000 bus with an input voltage range of 9 to 16 Vdc.\"}}, {\"@type\": \"Question\", \"name\": \"What are the GST 10’s physical dimensions and cable length?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GST 10 measures 31\/32 x 43\/64 x 3 3\/32 in. (24.7 x 17.0 x 78.6 mm) and includes a total cable length of 16 ft (4.9 m).\"}}, {\"@type\": \"Question\", \"name\": \"What temperature range can the GST 10 display?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GST 10 provides temperature readings from -22°F to 194°F (-30°C to 90°C). Readings beyond those extremes will not be displayed.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626152591697,"sku":"010-11328-00","price":116.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gra-10-010-11324-00-hr-070_72ae117d-71e9-45a9-a97a-a0982d91274b.jpg?v=1754729780"},{"product_id":"garmin-gfs-10","title":"Garmin GFS 10","description":"\u003cp\u003eThe GFS 10 sensor adds fuel control (gasoline) functions to your Garmin plotter and optimizes your boat's fuel economy. GFS 10 detects the fuel flow and transmits the data to the multifunction displays and to the screens of Garmin's GMI 10 instrumentation through CANet or NMEA 2000.\u003c\/p\u003e \u003cp\u003eUnlike other fuel flow sensors, the GFS 10 will include a function that detects the fuel level when connected to an existing analog indicator or resistive fuel tank sensor. The maximum fuel flow speed of the GFS 10 is 189 liters per hour and the minimum is 7.5 liters per hour.\u003c\/p\u003e \u003ch3\u003eFeatures:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDesign: 3\/8\" toothed accessories\u003c\/li\u003e \u003cli\u003eMaximum flow rate: up to 189 l\/h per motor\u003c\/li\u003e \u003cli\u003eMinimum flow rate: 7.5 l\/h\u003c\/li\u003e \u003cli\u003eMaximum back pressure: 0.5 PSI At 20 GPH \/ 1.0 PSI at 40 GPH\u003c\/li\u003e \u003cli\u003eSupply voltage: 10-22 V\u003c\/li\u003e \u003cli\u003eFire resistant: Yes\u003c\/li\u003e \u003c\/ul\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=72fecb8327d17f139c7f8478de10a2e7baafd7621b5510fcf89333b59bc7863d --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eHow do I care for the Garmin GFS 10 unit?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe case requires no user maintenance except cleaning. Use a cloth dampened with mild detergent, and avoid chemical cleaners and solvents.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the Garmin GFS 10 be cleaned?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe case requires no user maintenance other than cleaning. Clean the outer casing with a cloth dampened with mild detergent solution. Avoid using chemical cleaners or solvents that may damage plastic components.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat maintenance does the Garmin GFS 10 require regularly?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe unit’s case does not require user maintenance except regular cleaning, as instructed. No other routine maintenance is specified.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the warranty period for this product?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThis Garmin product is warranted to be free from defects in materials or workmanship for one year from the date of purchase.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs there a certification or compliance statement for the GFS 10?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eGarmin declares that the product complies with Directive 1999\/5\/EC essential requirements and other relevant provisions.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs the GFS 10 waterproof?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe unit is waterproof to IEC Standard 60529 IPX7. It can withstand immersion in 1 meter of water for 30 minutes. Prolonged submersion may cause damage.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should I do if the unit is submerged?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAfter submersion, be certain to wipe and air dry the unit before reuse to avoid potential damage.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there any user-serviceable parts inside?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThis product does not contain any user-serviceable parts. Repairs should only be made by an authorized Garmin service center.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"How do I care for the Garmin GFS 10 unit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The case requires no user maintenance except cleaning. Use a cloth dampened with mild detergent, and avoid chemical cleaners and solvents.\"}}, {\"@type\": \"Question\", \"name\": \"How should the Garmin GFS 10 be cleaned?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The case requires no user maintenance other than cleaning. Clean the outer casing with a cloth dampened with mild detergent solution. Avoid using chemical cleaners or solvents that may damage plastic components.\"}}, {\"@type\": \"Question\", \"name\": \"What maintenance does the Garmin GFS 10 require regularly?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The unit’s case does not require user maintenance except regular cleaning, as instructed. No other routine maintenance is specified.\"}}, {\"@type\": \"Question\", \"name\": \"What is the warranty period for this product?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This Garmin product is warranted to be free from defects in materials or workmanship for one year from the date of purchase.\"}}, {\"@type\": \"Question\", \"name\": \"Is there a certification or compliance statement for the GFS 10?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Garmin declares that the product complies with Directive 1999\/5\/EC essential requirements and other relevant provisions.\"}}, {\"@type\": \"Question\", \"name\": \"Is the GFS 10 waterproof?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The unit is waterproof to IEC Standard 60529 IPX7. It can withstand immersion in 1 meter of water for 30 minutes. Prolonged submersion may cause damage.\"}}, {\"@type\": \"Question\", \"name\": \"What should I do if the unit is submerged?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"After submersion, be certain to wipe and air dry the unit before reuse to avoid potential damage.\"}}, {\"@type\": \"Question\", \"name\": \"Are there any user-serviceable parts inside?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This product does not contain any user-serviceable parts. Repairs should only be made by an authorized Garmin service center.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626152624465,"sku":"010-00671-00","price":153.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gfs-10-010-00671-00-hr-004-scaled.jpg?v=1754729781"},{"product_id":"garmin-intelliducer-nmea2000-13-24-deg-tilt","title":"Garmin Intelliducer, NMEA2000 (13-24° tilt)","description":"\u003cp\u003eThis Intelliducer enhances your boat's nautical instrumentation by providing depth and temperature data to the screen or plotter of your Garmin NMEA 2000 digital marine device.\u003c\/p\u003e \u003cp\u003eThe 150 W through-hull Intelliducer has a maximum depth of 900 ft (274 m), operates at a frequency of 160 kHz, and is mounted at a deadrise angle between 13 and 24 degrees.\u003c\/p\u003e \u003cp\u003eThe transducer kit comes with installation instructions. Please follow the instructions carefully to avoid damage to the vessel.\u003c\/p\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=bd5f0b92ce0dbab15161e9aefadb3ac3c87ff3f00e80c1c2cb48ee4a88b20468 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eHow much clearance is required for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAllow for 8 in. (200 mm) top clearance and 6 in. (150 mm) clearance around the Intelliducer for proper installation access.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat drill hole size is required for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA 2 in. (51 mm) hole must be drilled in the hull for installation.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat regular maintenance is required?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eRegularly clean the submerged surface with a mild detergent and scour pad to remove aquatic growth. Avoid scratching the surface.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat installation caution should be observed for wood hulls?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDo not install in wood-hull boats as swelling wood can break the unit and possibly sink your boat.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat hull types can the Intelliducer be installed on?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe Intelliducer is designed for metal and fiberglass hull boats and should not be installed on wood-hull boats.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the recommended method for connecting to NMEA 2000?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eConnect using the included NMEA 2000 T-connector and drop cable to your existing NMEA 2000 network backbone.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the required deadrise angle for this Intelliducer model?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThis model is intended for hull deadrise angles between 13 and 24 degrees. Using outside this range will cause inaccurate readings.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat are the unit's physical dimensions and weight?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe unit measures 4 19\/32 in. (116.3 mm) L × 4 in. (101.4 mm) W × 3 in. (76.2 mm) D and weighs 13 oz. (364 g).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat are the cable lengths provided?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eNMEA 2000 drop Cable is 19 ft. 8 in. (6 m). NMEA 0183 power\/data cable is 29 ft. 6 in. (9 m).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the Intelliducer be used in salt water?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, but coat the submerged surface with water-based antifouling paint and reapply each season.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"How much clearance is required for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Allow for 8 in. (200 mm) top clearance and 6 in. (150 mm) clearance around the Intelliducer for proper installation access.\"}}, {\"@type\": \"Question\", \"name\": \"What drill hole size is required for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A 2 in. (51 mm) hole must be drilled in the hull for installation.\"}}, {\"@type\": \"Question\", \"name\": \"What regular maintenance is required?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Regularly clean the submerged surface with a mild detergent and scour pad to remove aquatic growth. Avoid scratching the surface.\"}}, {\"@type\": \"Question\", \"name\": \"What installation caution should be observed for wood hulls?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Do not install in wood-hull boats as swelling wood can break the unit and possibly sink your boat.\"}}, {\"@type\": \"Question\", \"name\": \"What hull types can the Intelliducer be installed on?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The Intelliducer is designed for metal and fiberglass hull boats and should not be installed on wood-hull boats.\"}}, {\"@type\": \"Question\", \"name\": \"What is the recommended method for connecting to NMEA 2000?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Connect using the included NMEA 2000 T-connector and drop cable to your existing NMEA 2000 network backbone.\"}}, {\"@type\": \"Question\", \"name\": \"What is the required deadrise angle for this Intelliducer model?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This model is intended for hull deadrise angles between 13 and 24 degrees. Using outside this range will cause inaccurate readings.\"}}, {\"@type\": \"Question\", \"name\": \"What are the unit's physical dimensions and weight?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The unit measures 4 19\/32 in. (116.3 mm) L × 4 in. (101.4 mm) W × 3 in. (76.2 mm) D and weighs 13 oz. (364 g).\"}}, {\"@type\": \"Question\", \"name\": \"What are the cable lengths provided?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"NMEA 2000 drop cable is 19 ft. 8 in. (6 m). NMEA 0183 power\/data cable is 29 ft. 6 in. (9 m).\"}}, {\"@type\": \"Question\", \"name\": \"Can the Intelliducer be used in salt water?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, but coat the submerged surface with water-based antifouling paint and reapply each season.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626182312273,"sku":"010-00701-01","price":153.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/010-00701-00_hr_001_bb3534b6-2746-4686-b5fb-1287a7a40616.jpg?v=1754730561"},{"product_id":"garmin-gst-43-thru-hull-speedtemperature-transducer","title":"Garmin GST 43 Thru-hull Speed\/Temperature Transducer","description":"\u003cp\u003eUse this Garmin GST 43 thru-hull transducer to provide compatible marine instruments or chartplotters with speed and water-temperature data.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReference:\u003c\/strong\u003e Transductor pasacascos de velocidad y temperatura GST43, 43MM.\u003c\/p\u003e\u003cul\u003e \u003cli\u003eDesigned for Garmin installations that use the GST 43 family referenced in the title.\u003c\/li\u003e \u003cli\u003eUseful when replacing a worn sensor or adding through-hull speed and temperature input to a compatible system.\u003c\/li\u003e \u003cli\u003eHelps maintain dependable marine data for instrument pages, alarms, and connected network displays.\u003c\/li\u003e \u003c\/ul\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=e7f6ca041aeeefa1880899cebe96474019bc11203764597866fef4fcb8d48ad4 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWhat are the hull thickness requirements for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GST 43 requires a hull thickness between a minimum of 6 mm (0.24 in.) and a maximum of 42 mm (1.65 in.).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat precautions are recommended during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAlways check the opposite side before drilling or cutting, and install equipment as per instructions to avoid damage or injury. Wear safety equipment.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat maintenance should be performed on the GST 43?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eRemove aquatic fouling with a soft cloth and mild detergent. If fouling is severe, use a scouring pad or putty knife, then dry the device.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat power supply voltage is required for the GST 43?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GST 43 requires 12 Vdc, with an acceptable voltage range from 10 to 16 Vdc.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow is the GST 43 connected to a NMEA 2000 network?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GST 43 connects to the NMEA 2000 network through the GST 10 adapter.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow is calibration performed for speed on the NMEA 2000 network?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eCalibrate speed through your Garmin device's settings after connecting GST 43 via GST 10; follow on-screen instructions and use GPS speed as a reference.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat are the dimensions of the GST 43 transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe dimensions of the GST 43 transducer are 42 x 86 mm (1.65 x 3.38 in.).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the length of the transducer cable?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe transducer cable length is 6 m (19.7 ft.).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What are the hull thickness requirements for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GST 43 requires a hull thickness between a minimum of 6 mm (0.24 in.) and a maximum of 42 mm (1.65 in.).\"}}, {\"@type\": \"Question\", \"name\": \"What precautions are recommended during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Always check the opposite side before drilling or cutting, and install equipment as per instructions to avoid damage or injury. Wear safety equipment.\"}}, {\"@type\": \"Question\", \"name\": \"What maintenance should be performed on the GST 43?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Remove aquatic fouling with a soft cloth and mild detergent. If fouling is severe, use a scouring pad or putty knife, then dry the device.\"}}, {\"@type\": \"Question\", \"name\": \"What power supply voltage is required for the GST 43?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GST 43 requires 12 Vdc, with an acceptable voltage range from 10 to 16 Vdc.\"}}, {\"@type\": \"Question\", \"name\": \"How is the GST 43 connected to a NMEA 2000 network?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GST 43 connects to the NMEA 2000 network through the GST 10 adapter.\"}}, {\"@type\": \"Question\", \"name\": \"How is calibration performed for speed on the NMEA 2000 network?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Calibrate speed through your Garmin device's settings after connecting GST 43 via GST 10; follow on-screen instructions and use GPS speed as a reference.\"}}, {\"@type\": \"Question\", \"name\": \"What are the dimensions of the GST 43 transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The dimensions of the GST 43 transducer are 42 x 86 mm (1.65 x 3.38 in.).\"}}, {\"@type\": \"Question\", \"name\": \"What is the length of the transducer cable?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The transducer cable length is 6 m (19.7 ft.).\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"No GST 10","offer_id":51626182377809,"sku":"010-04283-00","price":131.66,"currency_code":"EUR","in_stock":true},{"title":"GST 10","offer_id":53269916746065,"sku":"010-04284-00","price":153.73,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/cf-lg_144cd3f7-2eee-4811-9460-825fb3ab8e61.jpg?v=1773482272"},{"product_id":"garmin-gdt-43-depth-and-temperature-transducer","title":"Garmin GDT 43 Depth and Temperature Transducer","description":"\u003cp\u003eThis through-hull transducer is capable of reading both water depth and temperature. It can upgrade an existing 43 mm Nexus and Silva through-hull transducer (TH43). When installed with the NMEA 2000® adapter, the GDT 43 can be directly connected to the NMEA 2000 network, and the information can be displayed on a compatible Garmin plotter or instrument screen.\u003c\/p\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=39081daa6095cb5e013291a9532455b5f5b39f14cfeca831248606bfbf6baa77 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eHow should the core of a cored-fiberglass hull be sealed during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eSeal the core using either fiberglass cloth and resin or casting epoxy to prevent water intrusion.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the recommended hull thickness for installing the GDT 43?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe hull thickness should be between 6 mm (0.24 in.) minimum and 42 mm (1.65 in.) maximum for proper installation.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat maintenance is recommended for the transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eRegularly clean with a soft cloth and mild detergent to remove fouling and maintain performance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat initial step should you take after installing the GDT 43 transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eCheck your boat for leaks near the installation site once it is in the water.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow is the GDT 43 connected to an NMEA 2000 network?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eConnects through the NMEA 2000 adapter, which supplies power and interfaces with compatible devices.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat are the main mounting location considerations for the GDT 43 transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMount in clean, non-turbulent water, avoid strakes\/supports, and don’t place where it can be jarred or create cavitation affecting performance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the dimension of the GDT 43 transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GDT 43 transducer measures 42 x 86 mm (1.65 x 3.38 in.).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"How should the core of a cored-fiberglass hull be sealed during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Seal the core using either fiberglass cloth and resin or casting epoxy to prevent water intrusion.\"}}, {\"@type\": \"Question\", \"name\": \"What is the recommended hull thickness for installing the GDT 43?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The hull thickness should be between 6 mm (0.24 in.) minimum and 42 mm (1.65 in.) maximum for proper installation.\"}}, {\"@type\": \"Question\", \"name\": \"What maintenance is recommended for the transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Regularly clean with a soft cloth and mild detergent to remove fouling and maintain performance.\"}}, {\"@type\": \"Question\", \"name\": \"What initial step should you take after installing the GDT 43 transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Check your boat for leaks near the installation site once it is in the water.\"}}, {\"@type\": \"Question\", \"name\": \"How is the GDT 43 connected to an NMEA 2000 network?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Connects through the NMEA 2000 adapter, which supplies power and interfaces with compatible devices.\"}}, {\"@type\": \"Question\", \"name\": \"What are the main mounting location considerations for the GDT 43 transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Mount in clean, non-turbulent water, avoid strakes\/supports, and don’t place where it can be jarred or create cavitation affecting performance.\"}}, {\"@type\": \"Question\", \"name\": \"What is the dimension of the GDT 43 transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GDT 43 transducer measures 42 x 86 mm (1.65 x 3.38 in.).\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626182476113,"sku":"010-01749-00","price":283.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-1.jpg?v=1754730567"},{"product_id":"airmar-dst810-smart-transducer-garmin-edition","title":"Airmar DST810 Smart Transducer (Garmin Edition)","description":"\u003cp\u003eThis NMEA 2000® through-hull smart transducer combines accurate depth, speed, and temperature readings with attitude detection for pitch\/roll and trim\/heel data. It can detect depths of up to 100 meters (330 feet) and provides a rapid 5 Hz water speed signal for smoother display on plotters or other compatible screens.\u003c\/p\u003e\n\u003cp\u003eBluetooth® wireless connectivity makes it easy to manage sensor data calibration via the Airmar Cast app interface. Additionally, the sensor’s 235 kHz operating frequency helps to minimize interference with other vessel sonar devices. The transducer’s wide 10 x 44-degree beam width allows it to locate the bottom even when installed on hulls with large deadrise angles or heeling sailboats.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626182508881,"sku":"010-11051-20","price":367.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-2.jpg?v=1754730568"},{"product_id":"airmar-nmea2000-235-khz-p79-in-hull-transducer-6-deg-beam-022-deg-deadrise-garmin-edition","title":"Airmar NMEA2000 235 kHz P79 In-Hull Transducer (6° beam, 0–22° deadrise) (Garmin Edition)","description":"\u003cp\u003eOur adjustable-angle plastic through-hull transducer makes installation very simple.\u003c\/p\u003e\n\u003cp\u003eThe 100 W NMEA 2000 transducer has a depth capability of 500 feet, operates at a frequency of 235 kHz, has a 6-degree beam, and an adjustable deadrise angle ranging from 0 to 22 degrees.\u003c\/p\u003e\n\u003cp\u003eThe transducer kit comes with installation instructions. Please follow the instructions carefully to avoid damaging the vessel.\u003c\/p\u003e\n\u003cp\u003e*Not recommended for hulls with a honeycomb core. The fiberglass should not be thicker than 5\/8\".\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626182541649,"sku":"010-11394-00","price":352.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-3.jpg?v=1754730569"}],"url":"https:\/\/www.sailrace.com\/ru-caucasus\/collections\/%d0%bc%d0%be%d1%80%d1%81%d0%ba%d0%b8%d0%b5-%d0%b4%d0%b0%d1%82%d1%87%d0%b8%d0%ba%d0%b8.oembed","provider":"SailRACE","version":"1.0","type":"link"}