{"product_id":"garmin-boat-switch","title":"Garmin Boat Switch","description":"\u003cp\u003eAll in one\u003c\/p\u003e \u003cp\u003eReplace existing two-element systems (fuse box and switches) to facilitate the control and operation of on-board functions.\u003c\/p\u003e \u003cp\u003eDigital control\u003c\/p\u003e \u003cp\u003eControl and protect up to 20 circuits from the plotter instead of using a button or a physical switch.\u003c\/p\u003e \u003cp\u003eON\/OFF Switches\u003c\/p\u003e \u003cp\u003eThe switching outputs control the bilge pump and the non-dimmable lights, such as navigation and courtesy lights.\u003c\/p\u003e \u003cp\u003eMitigatable departures\u003c\/p\u003e \u003cp\u003eThe pulse sliders allow you to adjust the brightness on board to your liking.\u003c\/p\u003e \u003cp\u003eMomentary outings\u003c\/p\u003e \u003cp\u003eControl the horns and much more. You just have to press and hold and release depending on the desired duration of the sound.\u003c\/p\u003e \u003cp\u003eNursery timer\u003c\/p\u003e \u003cp\u003eA built-in timer makes the pump recycle water to keep the fish alive and the pumps running for longer.\u003c\/p\u003e \u003cp\u003eSupervise the deposits\u003c\/p\u003e \u003cp\u003eDetects and calibrates the transmitter of up to four tanks, such as those of fuel, fresh water, gray water, black water and nursery.\u003c\/p\u003e \u003cp\u003eAdditional tickets\u003c\/p\u003e \u003cp\u003eCheck the voltages of the internal and starting batteries, monitor the operation of the bilge pump and connect optional physical switches.\u003c\/p\u003e \u003cp\u003eUpgrade your boat\u003c\/p\u003e \u003cp\u003eInstall the system on existing boats without special tools or configuration using cables with 18′′ conductors and color-coded channel cables.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eMisc\u003c\/td\u003e \u003ctd\u003e \u003ctable style=\"height: 1037px\" width=\"920\"\u003e \u003ccolgroup\u003e \u003ccol width=\"33%\"\u003e \u003ccol width=\"67%\"\u003e \u003c\/colgroup\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd colspan=\"2\"\u003e \u003ch4\u003eGeneral\u003c\/h4\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDimensions (An. x Al. x Pr.) (Only the unit)\u003c\/td\u003e \u003ctd\u003e9,1 X ″ X 4,2 mm (″1,5 X ″230 X 10638)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWeight (Only the unit)\u003c\/td\u003e \u003ctd\u003e14,1 g (400 oz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eAmbient temperature\u003c\/td\u003e \u003ctd\u003eFrom -20 °C to 55 °C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eClassification of the water in the box\u003c\/td\u003e \u003ctd\u003eIP65\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCommunication\u003c\/td\u003e \u003ctd\u003eRed CAN-bus NMEA 2000®, LEN-0\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd colspan=\"2\"\u003e \u003ch4\u003eDepartures\u003c\/h4\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHigh side\u003c\/td\u003e \u003ctd\u003e13 channels of 10 A, 7 channels of 5 A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd colspan=\"2\"\u003e \u003ch4\u003eDepartures\u003c\/h4\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eGrounding switch input\u003c\/td\u003e \u003ctd\u003e15\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMonitor of the bilde bomb\u003c\/td\u003e \u003ctd\u003e2\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd colspan=\"2\"\u003e \u003ch4\u003eAnalog input\u003c\/h4\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eVoltios\u003c\/td\u003e \u003ctd\u003e3 a 0-16 V +\/-1 %\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eResistance\u003c\/td\u003e \u003ctd\u003e2 a 0-1500 ohmios +\/-5 %\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd colspan=\"2\"\u003e \u003ch4\u003eElectric power\u003c\/h4\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMaximum current\u003c\/td\u003e \u003ctd\u003e50 A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower consumption off\u003c\/td\u003e \u003ctd\u003e60 mA\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSupply voltage (12 V)\u003c\/td\u003e \u003ctd\u003e9-16 V cc\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd colspan=\"2\"\u003e \u003ch4\u003eConnector\u003c\/h4\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eNMEA 2000®\u003c\/td\u003e \u003ctd\u003eMacro micro M12 de 5 pines\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eChannels\u003c\/td\u003e \u003ctd\u003eMolex MX150 L 16 Circuits\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower terminal\u003c\/td\u003e \u003ctd\u003ePerno M6\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cp\u003e \u003c\/p\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=48c3c6c5af3d736952b63e02dfc4f07db4c58aa26f1c57d1ffe878c8118973c4 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eHow should unused wires be handled?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eInsulate any unused bare wire connections after completing installation.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat safety precautions should be followed during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDisconnect the vessel's power supply before starting installation and ensure the device is grounded per instructions.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWho should install the Garmin Boat Switch?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eGarmin strongly recommends professional installation by someone with knowledge of electrical systems.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs it necessary to install both wiring harnesses?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, connect both X1 and X2 wiring harnesses even if not every wire is used.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should I consider when planning wiring connections?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eCarefully plan power, network, and switched device layout; use marine-grade, waterproof connectors for all bare wire connections.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do I connect devices to the wiring harness?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eUse the provided wiring harnesses; connect using marine-grade connectors and label wires at both ends for easy identification.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs mounting hardware included?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eNo, mounting hardware like pan-head screws is not included and must be sourced separately.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat kind of mounting screws should I use?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eUse pan-head screws of appropriate length; countersunk screws and lubricants may damage the housing.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould I use lubricants or grease when mounting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDo not apply grease or lubricant to the screws; this can damage the device housing.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should I mount the device to avoid damage?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMount only on a flat, vertical surface using pan-head screws; do not overtighten or use the device as a drilling template.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"How should unused wires be handled?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Insulate any unused bare wire connections after completing installation.\"}}, {\"@type\": \"Question\", \"name\": \"What safety precautions should be followed during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Disconnect the vessel's power supply before starting installation and ensure the device is grounded per instructions.\"}}, {\"@type\": \"Question\", \"name\": \"Who should install the Garmin Boat Switch?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Garmin strongly recommends professional installation by someone with knowledge of electrical systems.\"}}, {\"@type\": \"Question\", \"name\": \"Is it necessary to install both wiring harnesses?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, connect both X1 and X2 wiring harnesses even if not every wire is used.\"}}, {\"@type\": \"Question\", \"name\": \"What should I consider when planning wiring connections?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Carefully plan power, network, and switched device layout; use marine-grade, waterproof connectors for all bare wire connections.\"}}, {\"@type\": \"Question\", \"name\": \"How do I connect devices to the wiring harness?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Use the provided wiring harnesses; connect using marine-grade connectors and label wires at both ends for easy identification.\"}}, {\"@type\": \"Question\", \"name\": \"Is mounting hardware included?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, mounting hardware like pan-head screws is not included and must be sourced separately.\"}}, {\"@type\": \"Question\", \"name\": \"What kind of mounting screws should I use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Use pan-head screws of appropriate length; countersunk screws and lubricants may damage the housing.\"}}, {\"@type\": \"Question\", \"name\": \"Should I use lubricants or grease when mounting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Do not apply grease or lubricant to the screws; this can damage the device housing.\"}}, {\"@type\": \"Question\", \"name\": \"How should I mount the device to avoid damage?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Mount only on a flat, vertical surface using pan-head screws; do not overtighten or use the device as a drilling template.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626145448273,"sku":"010-02735-00","price":808.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-boat-switch-boatswitch-hr-1002.png?v=1754729631","url":"https:\/\/www.sailrace.com\/ru-caucasus\/products\/garmin-boat-switch","provider":"SailRACE","version":"1.0","type":"link"}