{"product_id":"garmin-class-a-drive-unit-for-ghp-12","title":"Garmin Class A Drive Unit for GHP 12","description":"\u003cp\u003eThe class A actor unit works with the GHP 12 nautical autopilot system to control the steering system of your sailing boat. This device is designed for use with larger boats, up to 28,500 lbs (12,927 kg) of displacement.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eType of drive unit: linear\u003c\/li\u003e \u003cli\u003eMovement length: 12\" (303 mm)\u003c\/li\u003e \u003cli\u003eMaximum propulsion: 800 lb (400 kg)\u003c\/li\u003e \u003cli\u003eDimensions (centered), H X H X D: 32.3\" X 6.5\" X 6.1\" (820 X 165 X 155 mm)\u003c\/li\u003e \u003cli\u003eVoltage supply: 10 V to 30 V\u003c\/li\u003e \u003cli\u003eAverage clutch current at 12 V: 0.5 amps\u003c\/li\u003e \u003cli\u003eAverage motor current at 12 V: 1-2 amps\u003c\/li\u003e \u003cli\u003eOperating temperature: from -15 °C to 60 °C (from 5 °F to 140 °F)\u003c\/li\u003e \u003c\/ul\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=7a6d39a1a34771b91b8a0b1dbe9e3910fe3e857be70e125ee83a9f1e8e9e77f7 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWhat are the mounting hole spacing requirements for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe four mounting holes should be marked and drilled 2.68 inches (68 mm) apart.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat kind of tiller arm or quadrant does the drive unit connect to?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe included tiller pin is designed for use with a quadrant or tiller arm up to 0.79 in. (20 mm) thick. If you lack a suitable quadrant, you must install a compatible tiller arm.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the drive unit be installed by the vessel owner or should a professional do it?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eProfessional installation is highly recommended because installation requires specific knowledge about rudder operation to avoid damage.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the recommended maintenance for the drive unit?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAnnually examine all bolted connections and the locknut that secures the drag link. Tighten if necessary.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat safety gear should be worn during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYou should always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat wiring instructions are provided regarding the drive unit cables?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYou must not cut the cables connected to the drive unit, as cutting the cables will void the warranty.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs the drive unit water-resistant or waterproof?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eNo, the drive unit is not water-resistant and must be installed where it will not be exposed to water. Exposure to immersion, dripping water, or hose spray will damage it.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the movement of the drive unit be limited?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe drive unit movement must be limited by physical end stops, not by the drive unit itself. Failing to install end stops can result in damage to the unit.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the recommended mounting orientation for the drive unit?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe drive unit should be mounted with the motor pointing sideways if possible, as mounting with the motor up or down may create more friction and cause more wear over time.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What are the mounting hole spacing requirements for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The four mounting holes should be marked and drilled 2.68 inches (68 mm) apart.\"}}, {\"@type\": \"Question\", \"name\": \"What kind of tiller arm or quadrant does the drive unit connect to?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The included tiller pin is designed for use with a quadrant or tiller arm up to 0.79 in. (20 mm) thick. If you lack a suitable quadrant, you must install a compatible tiller arm.\"}}, {\"@type\": \"Question\", \"name\": \"Can the drive unit be installed by the vessel owner or should a professional do it?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Professional installation is highly recommended because installation requires specific knowledge about rudder operation to avoid damage.\"}}, {\"@type\": \"Question\", \"name\": \"What is the recommended maintenance for the drive unit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Annually examine all bolted connections and the locknut that secures the drag link. Tighten if necessary.\"}}, {\"@type\": \"Question\", \"name\": \"What safety gear should be worn during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"You should always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.\"}}, {\"@type\": \"Question\", \"name\": \"What wiring instructions are provided regarding the drive unit cables?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"You must not cut the cables connected to the drive unit, as cutting the cables will void the warranty.\"}}, {\"@type\": \"Question\", \"name\": \"Is the drive unit water-resistant or waterproof?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, the drive unit is not water-resistant and must be installed where it will not be exposed to water. Exposure to immersion, dripping water, or hose spray will damage it.\"}}, {\"@type\": \"Question\", \"name\": \"How should the movement of the drive unit be limited?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The drive unit movement must be limited by physical end stops, not by the drive unit itself. Failing to install end stops can result in damage to the unit.\"}}, {\"@type\": \"Question\", \"name\": \"What is the recommended mounting orientation for the drive unit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The drive unit should be mounted with the motor pointing sideways if possible, as mounting with the motor up or down may create more friction and cause more wear over time.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626154557777,"sku":"010-11572-00","price":1691.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-class-a-drive-unit-for-ghp-12-010-11572-00-hr-100.jpg?v=1754729857","url":"https:\/\/www.sailrace.com\/ru-caucasus\/products\/garmin-class-a-drive-unit-for-ghp-12","provider":"SailRACE","version":"1.0","type":"link"}