{"product_id":"garmin-ecu-electronic-control-unit-for-ghp12-reactor-40","title":"Garmin ECU (Electronic Control Unit) for GHP12 \/ Reactor 40","description":"\u003cp\u003eUse this Garmin electronic control unit as a core control component within a compatible Garmin autopilot or steering installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReference:\u003c\/strong\u003e Unidad de control Electrónico ECU GHP12\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned for integration with the matching Garmin autopilot system.\u003c\/li\u003e\n\u003cli\u003eUseful as a replacement or service component in a compatible marine steering setup.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=f0c13b92d794b5fb7df658350648c915dec8af28cbdb7b9ecca7d224c4f122db --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eIs there any maintenance recommended for hydraulic fittings during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eUse appropriate thread sealant on all pipe threads in the hydraulic system, and install shut-off valves for easy pump removal if needed.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there any safety hazards related to ECU installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eBeware of hot surfaces on the heat-sink, motor, and solenoid; risk of entrapment or pinching from moving parts when in use.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat safety warnings should installers be aware of during ECU installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eInstallers should wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding, and check the opposite side before drilling.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat are the key wiring considerations for connecting the ECU?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe ECU connects to the boat battery using the included power cable, which can be extended if needed with the correct wire gauge.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs a dedicated helm control required to operate the system?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA dedicated helm control is not required if the autopilot CCU is connected to the same NMEA 2000 network as a compatible Garmin chartplotter.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat tools and supplies are needed for installing the ECU and related components?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYou’ll need tools including safety glasses, a drill and drill bits, wrenches, cutters\/strippers, screwdrivers, cable ties, solder, marine sealant, and more.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the required power source for the ECU?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe ECU must be connected to a 12 to 24 Vdc power source. Use the correct wire gauge for extensions.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre mounting screws included with the ECU?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMounting screws are included with the ECU, but different screws may be needed depending on your mounting surface.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs there a minimum fuse requirement for ECU power connection?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe appropriate fuse must be in place as indicated in the product specifications.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is required for NMEA 2000 network setup?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIf there isn't already a NMEA 2000 network, you can build one using the supplied cables and connectors. Connect the CCU and helm control to it.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the ECU be mounted in any orientation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe ECU can be mounted on a flat surface, facing any direction, but must not be submerged or exposed to wash down.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Is there any maintenance recommended for hydraulic fittings during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Use appropriate thread sealant on all pipe threads in the hydraulic system, and install shut-off valves for easy pump removal if needed.\"}}, {\"@type\": \"Question\", \"name\": \"Are there any safety hazards related to ECU installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Beware of hot surfaces on the heat-sink, motor, and solenoid; risk of entrapment or pinching from moving parts when in use.\"}}, {\"@type\": \"Question\", \"name\": \"What safety warnings should installers be aware of during ECU installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Installers should wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding, and check the opposite side before drilling.\"}}, {\"@type\": \"Question\", \"name\": \"What are the key wiring considerations for connecting the ECU?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The ECU connects to the boat battery using the included power cable, which can be extended if needed with the correct wire gauge.\"}}, {\"@type\": \"Question\", \"name\": \"Is a dedicated helm control required to operate the system?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A dedicated helm control is not required if the autopilot CCU is connected to the same NMEA 2000 network as a compatible Garmin chartplotter.\"}}, {\"@type\": \"Question\", \"name\": \"What tools and supplies are needed for installing the ECU and related components?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"You’ll need tools including safety glasses, a drill and drill bits, wrenches, cutters\/strippers, screwdrivers, cable ties, solder, marine sealant, and more.\"}}, {\"@type\": \"Question\", \"name\": \"What is the required power source for the ECU?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The ECU must be connected to a 12 to 24 Vdc power source. Use the correct wire gauge for extensions.\"}}, {\"@type\": \"Question\", \"name\": \"Are mounting screws included with the ECU?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Mounting screws are included with the ECU, but different screws may be needed depending on your mounting surface.\"}}, {\"@type\": \"Question\", \"name\": \"Is there a minimum fuse requirement for ECU power connection?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The appropriate fuse must be in place as indicated in the product specifications.\"}}, {\"@type\": \"Question\", \"name\": \"What is required for NMEA 2000 network setup?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If there isn't already a NMEA 2000 network, you can build one using the supplied cables and connectors. Connect the CCU and helm control to it.\"}}, {\"@type\": \"Question\", \"name\": \"Can the ECU be mounted in any orientation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The ECU can be mounted on a flat surface, facing any direction, but must not be submerged or exposed to wash down.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626154983761,"sku":"010-11053-30","price":734.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/cf-lg_c2976671-9439-43bc-96ea-bfd539dafa4c.jpg?v=1773475354","url":"https:\/\/www.sailrace.com\/ru-caucasus\/products\/garmin-ecu-electronic-control-unit-for-ghp12-reactor-40","provider":"SailRACE","version":"1.0","type":"link"}