{"product_id":"garmin-gps-and-glonass-ga-38-antenna-for-vhf-ais-and-plotters-in-white","title":"Garmin GPS and Glonass GA 38 antenna for VHF, AIS and plotters, in white","description":"\u003cp\u003eDesigned to take advantage of the GLONASS system or satellite constellations, in addition to the standard GPS, this sturdy outdoor antenna incorporates a water-resistant low-profile housing and provides three simple mounting solutions: pole, surface or under deck (for the bottom of fiberglass covers).\u003c\/p\u003e \u003cp\u003eThe external GPS and GLONASS antennas provide greater flexibility and more installation options, as well as the power necessary to achieve better reception of the GPS or GLONASS signal, for products with built-in GPS or GLONASS antennas.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDimensions (Pr. X H.): 91.6 mm X 49.5 mm (3 19\/32′′ X 1 15\/18′′)\u003c\/li\u003e \u003cli\u003eWeight: 201 g (7.1 oz)\u003c\/li\u003e \u003cli\u003eTemperature range: from -30 °C to 80 °C (from -22 °F to 176 °F)\u003c\/li\u003e \u003cli\u003eCase material: fully sealed plastic alloy with high impact resistance, water resistant in accordance with IPX7 standards\u003c\/li\u003e \u003c\/ul\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=1e9c22017a6a4191a8fcf8452ec2aa21364ba908dd856079011721f7f7e7da7e --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWhat connector does the GA 38 antenna use for installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe GA 38 uses a BNC connector to attach to the ANTENNA or EXT GPS port on compatible Garmin chartplotters.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the cable be routed when using the pole mount adapter?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eCable can be routed outside or through the pole; fill any gap in the cable slot with marine sealant (optional) after installation.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat safety precautions should be followed during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eWear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding. Check the opposite side before drilling\/cutting.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat type of pole is required for pole mounting?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA standard 1 in. OD, 14 threads per inch, pipe-threaded pole is required (not included).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat are the recommended steps for surface mounting the GA 38 antenna?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTo surface mount, use the bracket as a template for pilot holes, drill holes, secure the bracket, route the cable, and lock the antenna with the included set screw.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the recommended compass-safe distance for the antenna?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMaintain at least 114 mm (4.5 in.) between the antenna and any compass.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the GA 38 antenna be damaged by magnets?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDo not install or store near strong magnets, including speakers, as a strong magnetic field can damage the antenna.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat mounting options are available for the GA 38 antenna?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYou can mount the GA 38 on a flat surface, on a pole (1 in. OD, 14 threads per inch), or under a fiberglass deck.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What connector does the GA 38 antenna use for installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The GA 38 uses a BNC connector to attach to the ANTENNA or EXT GPS port on compatible Garmin chartplotters.\"}}, {\"@type\": \"Question\", \"name\": \"How should the cable be routed when using the pole mount adapter?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Cable can be routed outside or through the pole; fill any gap in the cable slot with marine sealant (optional) after installation.\"}}, {\"@type\": \"Question\", \"name\": \"What safety precautions should be followed during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding. Check the opposite side before drilling\/cutting.\"}}, {\"@type\": \"Question\", \"name\": \"What type of pole is required for pole mounting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A standard 1 in. OD, 14 threads per inch, pipe-threaded pole is required (not included).\"}}, {\"@type\": \"Question\", \"name\": \"What are the recommended steps for surface mounting the GA 38 antenna?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"To surface mount, use the bracket as a template for pilot holes, drill holes, secure the bracket, route the cable, and lock the antenna with the included set screw.\"}}, {\"@type\": \"Question\", \"name\": \"What is the recommended compass-safe distance for the antenna?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Maintain at least 114 mm (4.5 in.) between the antenna and any compass.\"}}, {\"@type\": \"Question\", \"name\": \"Can the GA 38 antenna be damaged by magnets?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Do not install or store near strong magnets, including speakers, as a strong magnetic field can damage the antenna.\"}}, {\"@type\": \"Question\", \"name\": \"What mounting options are available for the GA 38 antenna?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"You can mount the GA 38 on a flat surface, on a pole (1 in. OD, 14 threads per inch), or under a fiberglass deck.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626159374673,"sku":"010-12017-00","price":73.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-gps-and-glonass-ga-38-antenna-for-vhf-ais-and-garmin-plotters-in-white-010-12017-00-hr-609-scaled.jpg?v=1754730010","url":"https:\/\/www.sailrace.com\/ru-caucasus\/products\/garmin-gps-and-glonass-ga-38-antenna-for-vhf-ais-and-plotters-in-white","provider":"SailRACE","version":"1.0","type":"link"}