{"product_id":"garmin-hydraulic-autopilot-reactor-40","title":"Garmin Hydraulic Autopilot Reactor 40","description":"\u003cp\u003eOur autopilot system with greater responsiveness in the water\u003c\/p\u003e \u003cul\u003e \u003cli\u003e9-axis solid-state course and position reference system (AHRS)\u003c\/li\u003e \u003cli\u003eIt reduces course errors, route deviation, rudder movement and energy consumption, while offering a comfortable trip\u003c\/li\u003e \u003cli\u003eSimple commissioning and calibration\u003c\/li\u003e \u003cli\u003eThe patented Shadow Drive™ technology allows you to stay in control even when the autopilot is activated\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eGarmin provides advanced nautical technology for users in the field of navigation previously available only for commercial boats in a complete package designed for sailing and motor boats. The Reactor 40 series of autopilots provides the most responsive autopilot system we have offered so far.\u003c\/p\u003e \u003cp\u003eReactor 40 automatic pilots are very versatile. In the corepack, functions are offered for sailing and motor navigation, including course control, wind control, turn\/trash, step turns and many more. You just have to select the autopilot compatible with your boat's steering system.\u003c\/p\u003e \u003cp\u003eThe Reactor 40 hydraulic autopilot corepack is perfect for any type of motor boats with hydraulic steering systems with inboard, outboard, mixed and diesel engine, or sailboats with hydraulic steering system. This robust design unit offers users of motor boats a simple autopilot system of high reliability during navigation. Thanks to its 9-axis solid-state AHRS system, Reactor 40 can be installed in virtually any place and orientation, and has a very simple operation. Our patented Shadow Drive technology offers navigators the security of knowing that they have control even when they use the autopilot.\u003c\/p\u003e \u003cp\u003e9-axis solid-state AHRS technology\u003c\/p\u003e \u003cp\u003eThe advanced 9-axis solid-state AHRS system allows you to install the Reactor 40 unit in virtually anywhere and orientation. In addition, this new system significantly reduces course errors, route deviation, rudder movement and energy consumption, while offering a comfortable trip for all passengers.\u003c\/p\u003e \u003cp\u003eAbility to react to sea conditions\u003c\/p\u003e \u003cp\u003eIn fact, this excellent autopilot responds to the state of the sea to stay the course. Even when pitching and swinging movements occur, the Reactor 40 autopilot guarantees that you maintain the desired course.\u003c\/p\u003e \u003cp\u003eSimple commissioning and calibration\u003c\/p\u003e \u003cp\u003eAll autopilots, without exception, require a commissioning and calibration process. We know that what you want is to get into the water, that's why we have streamlined and simplified this process as much as possible. That's what the concept \"The Power of Simple\" consists of.\u003c\/p\u003e \u003cp\u003eFull integration with Garmin plotters\u003c\/p\u003e \u003cp\u003eWhen combined with a compatible Garmin plotter connected to the network, you can have full control over the Reactor 40 unit from anywhere on the boat. The system is capable of maintaining the course in practically all types of weather and wind conditions, as well as carrying out a series of pre-programmed procedures for fishing for fishing and searching in a fluid way. In addition, with a network-connected compatible Garmin plotter and the optional BlueChart g3 Vision charts (sold separately), you will get industry-leading coverage, clarity and level of detail, with updated coastal charts that include integrated content from Garmin and Navionics®.\u003c\/p\u003e \u003cp\u003eStay in control with Shadow Drive technology\u003c\/p\u003e \u003cp\u003eThe Reactor 40 autopilot incorporates the patented Shadow Drive technology. This gives you the security of knowing that you will maintain control even with the autopilot activated. The Shadow Drive system automatically deactivates the autopilot if the rudder is turned, giving you the freedom to maneuver the ship. The autopilot is automatically reactivated when a fixed course is maintained.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDimensions of the unit (width X height X depth): 10.9 cm X 11.2 cm X 4.8 cm\u003c\/li\u003e \u003cli\u003eScreen resolution (width X height): 320 X 240 pixels\u003c\/li\u003e \u003cli\u003eType of screen: QVGA color LCD screen\u003c\/li\u003e \u003cli\u003eNMEA exit: NMEA 2000\u003c\/li\u003e \u003cli\u003eVoltage supply: from 10 V to 20 V\u003c\/li\u003e \u003c\/ul\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=7c74a1da8d18cc7879128daa6eeccc9ab953ab205bdcffd51fa6c1a40ab73d5d --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWho should install the Reactor 40 autopilot system?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eA qualified marine installer with knowledge of hydraulic steering and marine electrical systems should perform the installation.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should you test and adjust configuration after installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eTest at slow and then normal speed; observe if turns are smooth and heading hold is stable, and adjust settings only as needed.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhere should the CCU compass be mounted for best results?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eInstall the CCU in a location with minimal magnetic interference and check the magnetic quality after calibration.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do you calibrate the compass during setup?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eFollow the on-screen directions to keep the boat steady and flat; avoid listing or uneven loading for best calibration.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I complete system setup with the boat out of the water?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe Dockside Wizard can be completed with the boat in or out of the water. Care should be taken to avoid rudder or object damage.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould weight or movement be adjusted during configuration?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eKeep the boat's weight balanced and avoid moving around during calibration to ensure accurate sensor settings.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow are configuration settings reviewed or adjusted after the wizard?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eReview and correct any configuration values after the Dockside Wizard before finalizing the setup.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Who should install the Reactor 40 autopilot system?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A qualified marine installer with knowledge of hydraulic steering and marine electrical systems should perform the installation.\"}}, {\"@type\": \"Question\", \"name\": \"How should you test and adjust configuration after installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Test at slow and then normal speed; observe if turns are smooth and heading hold is stable, and adjust settings only as needed.\"}}, {\"@type\": \"Question\", \"name\": \"Where should the CCU compass be mounted for best results?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Install the CCU in a location with minimal magnetic interference and check the magnetic quality after calibration.\"}}, {\"@type\": \"Question\", \"name\": \"How do you calibrate the compass during setup?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Follow the on-screen directions to keep the boat steady and flat; avoid listing or uneven loading for best calibration.\"}}, {\"@type\": \"Question\", \"name\": \"Can I complete system setup with the boat out of the water?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The Dockside Wizard can be completed with the boat in or out of the water. Care should be taken to avoid rudder or object damage.\"}}, {\"@type\": \"Question\", \"name\": \"Should weight or movement be adjusted during configuration?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Keep the boat's weight balanced and avoid moving around during calibration to ensure accurate sensor settings.\"}}, {\"@type\": \"Question\", \"name\": \"How are configuration settings reviewed or adjusted after the wizard?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Review and correct any configuration values after the Dockside Wizard before finalizing the setup.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626154197329,"sku":"010-00705-21","price":1161.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-hydraulic-autopilot-reactor-40-hydraulic-autopilot-reactortm-40.webp?v=1754729834","url":"https:\/\/www.sailrace.com\/ru-caucasus\/products\/garmin-hydraulic-autopilot-reactor-40","provider":"SailRACE","version":"1.0","type":"link"}