{"product_id":"garmin-route-computer-unit-compact-reactor-40-for-volvo-penta","title":"Garmin Route computer unit (Compact Reactor 40 for Volvo-Penta)","description":"\u003cp\u003eOur CCU is the brain of the Reactor 40 autopilot system, which contains the sensory equipment used to determine the course and rotational speed. Connect the CCU to the NMEA 2000® network to establish communication with your GHC™ 20 and with optional devices compatible with NMEA 2000.\u003c\/p\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=f43361374ee57e496b4dc9eb096cf5d2cfa09f15bbe2a61fa375d486a2400c93 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWhat safety advice is advised during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eQualified marine installer is recommended; always wear goggles, ear protection, and a dust mask when drilling, cutting, or sanding.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the CCU be installed near speakers or electric motors?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eNo, avoid mounting within 60 cm (2 ft.) of magnetic sources like speakers or motors; keep large magnets at least 1.5 m (5 ft.) away.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs a dedicated helm control required to configure and use the autopilot?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIf there is no dedicated helm control, the CCU must be connected to the same NMEA 2000 network as a compatible Garmin chartplotter.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do you test for magnetic interference before mounting the CCU?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eUse a handheld compass at the mounting location. If the compass needle moves more than three degrees when moved around, choose another location.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat wiring connections are essential for the CCU?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe CCU must connect to the NMEA 2000 network and the CCU cable connects to both the alarm and Shadow Drive sensor.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDoes the CCU come with mounting screws?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, mounting screws are provided with the CCU.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the CCU be attached to its surface?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eUse the included screws or hardware of quality stainless or brass material. Test hardware with a handheld compass for magnetic fields.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat length is the CCU cable and can it be extended?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe CCU cable is 5 m (16 ft.) long. If the CCU cannot be mounted within 5 m of the ECU, extension cables are available.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the CCU be mounted in any orientation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, the CCU can be mounted in any orientation.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the CCU cable be cut?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eNo, the CCU cable must not be cut.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the recommended location relative to the boat's centerline?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe best location for the CCU is as close as possible to the centerline and center of rotation of the boat.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What safety advice is advised during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Qualified marine installer is recommended; always wear goggles, ear protection, and a dust mask when drilling, cutting, or sanding.\"}}, {\"@type\": \"Question\", \"name\": \"Can the CCU be installed near speakers or electric motors?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, avoid mounting within 60 cm (2 ft.) of magnetic sources like speakers or motors; keep large magnets at least 1.5 m (5 ft.) away.\"}}, {\"@type\": \"Question\", \"name\": \"Is a dedicated helm control required to configure and use the autopilot?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If there is no dedicated helm control, the CCU must be connected to the same NMEA 2000 network as a compatible Garmin chartplotter.\"}}, {\"@type\": \"Question\", \"name\": \"How do you test for magnetic interference before mounting the CCU?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Use a handheld compass at the mounting location. If the compass needle moves more than three degrees when moved around, choose another location.\"}}, {\"@type\": \"Question\", \"name\": \"What wiring connections are essential for the CCU?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The CCU must connect to the NMEA 2000 network and the CCU cable connects to both the alarm and Shadow Drive sensor.\"}}, {\"@type\": \"Question\", \"name\": \"Does the CCU come with mounting screws?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, mounting screws are provided with the CCU.\"}}, {\"@type\": \"Question\", \"name\": \"How should the CCU be attached to its surface?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Use the included screws or hardware of quality stainless or brass material. Test hardware with a handheld compass for magnetic fields.\"}}, {\"@type\": \"Question\", \"name\": \"What length is the CCU cable and can it be extended?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The CCU cable is 5 m (16 ft.) long. If the CCU cannot be mounted within 5 m of the ECU, extension cables are available.\"}}, {\"@type\": \"Question\", \"name\": \"Can the CCU be mounted in any orientation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, the CCU can be mounted in any orientation.\"}}, {\"@type\": \"Question\", \"name\": \"Can the CCU cable be cut?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, the CCU cable must not be cut.\"}}, {\"@type\": \"Question\", \"name\": \"What is the recommended location relative to the boat's centerline?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The best location for the CCU is as close as possible to the centerline and center of rotation of the boat.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626153312593,"sku":"010-11052-68","price":1470.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/www.sailrace.com-cropped-sailrace-logo-transp-vertical_d0143e9a-131c-4e28-a00e-006fb163243b.png?v=1764065808","url":"https:\/\/www.sailrace.com\/ru-caucasus\/products\/garmin-route-computer-unit-compact-reactor-40-for-volvo-penta","provider":"SailRACE","version":"1.0","type":"link"}