{"product_id":"garmin-standard-corepack-of-reactor-40-wired-steering-with-autopilot-instrument-ghc-50","title":"Garmin Standard Corepack of Reactor 40 wired steering with autopilot instrument GHC 50","description":"\u003cp\u003eCompatibility with corepack\u003c\/p\u003e \u003cp\u003eThis corepack works with the SeaStar Optimus systems, the Yanmar Marine ZT370 mixed motor electronic power steering systems and the ZF 2800 Pod drive systems. Requires a compatible Garmin plotter.\u003c\/p\u003e \u003cp\u003eAhrs of 9-AXIS solid state\u003c\/p\u003e \u003cp\u003eThe advanced 9-axis solid-state AHRS system allows you to install the Reactor 40 unit in virtually anywhere and orientation. It even reduces energy consumption, minimizes course errors and much more.\u003c\/p\u003e \u003cp\u003eAbility to react to water conditions\u003c\/p\u003e \u003cp\u003eKeep the course at sea: this autopilot reacts to the conditions, so you can maintain peace of mind even when nooing or rocking movements occur.\u003c\/p\u003e \u003cp\u003eSimple calibration\u003c\/p\u003e \u003cp\u003eAll automatic pilots require a commissioning and calibration process. Reactor 40 makes it quick and easy.\u003c\/p\u003e \u003cp\u003eWireless remote functions\u003c\/p\u003e \u003cp\u003eControl the autopilot from anywhere on the boat using your compatible Garmin devices, including the Reactor autopilot remote control, certain quatix® nautical watches and many more (requires a compatible Garmin plotter or a GHC 50 autopilot instrument).\u003c\/p\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=d1f9f5f9646baa36476feba999e4c2735d1155bb6fd5a7312bea2a9731db140f --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eHow is the steering direction tested and switched during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDuring setup, test the rudder’s response left and right. If it turns in the opposite direction, use the Switch Direction option and retest.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do you calibrate the compass outside of the wizard?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eSelect Autopilot Setup \u0026gt; Autopilot Installation Setup \u0026gt; Compass Setup \u0026gt; Compass Cal. \u0026gt; Begin and keep the boat steady and flat throughout.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan configuration processes be run manually without wizards?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, you can manually start configuration processes such as compass calibration, autotune, and set north from the Autopilot Setup \u0026gt; Installation Setup menu.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhen is setting 'north' available and how is it performed?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe 'Set North' procedure is available if a compatible GPS is connected and acquired a position; drive straight, downwind, at cruising speed to align compass heading to COG.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do you verify tachometer readings during setup?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eWith engines running, compare the helm control\/chartplotter RPM readings with the boat dashboard tachometers; any mismatch may indicate a connection issue.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the Autotune procedure be conducted?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eConduct Autotune at typical cruising speed on open water. If unsuccessful, try at different speeds; follow on-screen prompts for alternate procedures.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there warnings regarding operating near hazards or with moving parts?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eUse caution near docks, pilings, and other boats. Avoid entrapment or pinching from moving parts while autopilot is engaged or being configured.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the Dockside Wizard be run with the boat in or out of water?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe Dockside Wizard can be completed either in or out of the water. If in the water, the boat must be stationary.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"How is the steering direction tested and switched during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"During setup, test the rudder’s response left and right. If it turns in the opposite direction, use the Switch Direction option and retest.\"}}, {\"@type\": \"Question\", \"name\": \"How do you calibrate the compass outside of the wizard?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Select Autopilot Setup \u003e Autopilot Installation Setup \u003e Compass Setup \u003e Compass Cal. \u003e Begin and keep the boat steady and flat throughout.\"}}, {\"@type\": \"Question\", \"name\": \"Can configuration processes be run manually without wizards?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, you can manually start configuration processes such as compass calibration, autotune, and set north from the Autopilot Setup \u003e Installation Setup menu.\"}}, {\"@type\": \"Question\", \"name\": \"When is setting 'north' available and how is it performed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The 'Set North' procedure is available if a compatible GPS is connected and acquired a position; drive straight, downwind, at cruising speed to align compass heading to COG.\"}}, {\"@type\": \"Question\", \"name\": \"How do you verify tachometer readings during setup?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"With engines running, compare the helm control\/chartplotter RPM readings with the boat dashboard tachometers; any mismatch may indicate a connection issue.\"}}, {\"@type\": \"Question\", \"name\": \"How should the Autotune procedure be conducted?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Conduct Autotune at typical cruising speed on open water. If unsuccessful, try at different speeds; follow on-screen prompts for alternate procedures.\"}}, {\"@type\": \"Question\", \"name\": \"Are there warnings regarding operating near hazards or with moving parts?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Use caution near docks, pilings, and other boats. Avoid entrapment or pinching from moving parts while autopilot is engaged or being configured.\"}}, {\"@type\": \"Question\", \"name\": \"Can the Dockside Wizard be run with the boat in or out of water?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The Dockside Wizard can be completed either in or out of the water. If in the water, the boat must be stationary.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626152755537,"sku":"010-02794-03","price":2132.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-standard-corepack-of-reactor-40-wired-steering-with-autopilot-instrument-ghc-50-standard-corepack-of-reactortm-40-wired-steering-with-autopilot-instrument-ghctm-50.webp?v=1754729787","url":"https:\/\/www.sailrace.com\/ru-caucasus\/products\/garmin-standard-corepack-of-reactor-40-wired-steering-with-autopilot-instrument-ghc-50","provider":"SailRACE","version":"1.0","type":"link"}