{"product_id":"lumishore-tix804-ora","title":"Lumishore TIX804-ORA","description":"\u003cp\u003eTIX804-ORA - White\u003c\/p\u003e \u003cp\u003eTIX804-ORA - White Interchangeable TH Light, LS, (60-0516)\u003c\/p\u003e\u003c!-- sr-faq v=1 vendor=lumishore source_sha256=22bfc651031f33636d8695e4046f44700c132e10877a89c151f3a0885d42a568 --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eWhat sealant\/adhesive does the installation guide recommend?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe tools list specifies marine sealant and notes “Use only 3M 4200”. The guide also describes applying a continuous bead around the sealant groove and shaft.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the hole cut-out size for the TIX804 shaft?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eThe datasheet specifies a metric cut-out of 86mm. The installation guide also lists TIX 804 hole size as 86mm (3.375”).\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow far below the waterline should it be installed?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eInstall the light 6\"–10\" (150–250mm) below the minimum load water line.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo I need to bond the TIX804 light to the vessel’s DC bonding system?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes—bonding is required for galvanic protection. Note: if installing with an isolation sleeve kit (e.g., wood\/metal\/carbon fibre hull cases), the guide says not to bond the lights.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat spacing is recommended between multiple lights?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eFor best results, install lights between 2.5ft (0.8m) and 6.5ft (2m) apart.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I install or remove the light while the vessel is in the water?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eNo. The guide states never to install or remove the light with the vessel in the water.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre there mounting surface constraints (flat\/curved, location)?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMount on a flat (not curved) surface, on transom or side hull only.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat tightening torque should I use on the retaining bolts?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eDo not over-tighten. Tighten bolts hand tight initially (less than 1Nm), then after sealant cures re-tighten, but do not exceed 3Nm on each bolt.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhere should the SUPRA i-Connect Hub be mounted?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMount the i-Connect Hub in a dry, well ventilated location.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo the power connections need to be waterproofed?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes. The guide says all power connections must be made waterproof using a suitable junction box or waterproof connectors.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should I do with unused ports on the i-Connect hub?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eUnused hub ports should be sealed with the provided waterproof caps.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003c!-- \/sr-faq --\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":53132043747665,"sku":"010-04498-00","price":684.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/cf-xl_5.webp?v=1772023839","url":"https:\/\/www.sailrace.com\/ru-caucasus\/products\/lumishore-tix804-ora","provider":"SailRACE","version":"1.0","type":"link"}