{"product_id":"garmin-striker-plus-4","title":"Garmin STRIKER Plus 4","description":"\u003cp\u003e\u003cstrong\u003e4.3\" GPS probe with Quickdraw Contours map software\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes a dual-beam transducer with a traditional Garmin CHIRP probe to obtain very sharp images and exceptional separation of the lenses\u003c\/li\u003e\n\u003cli\u003eGarmin's integrated Quickdraw™ Contours map software allows you to create and store maps with 30 cm contours for up to more than 800,000 hectares\u003c\/li\u003e\n\u003cli\u003eThe integrated GPS allows you to mark waypoints, create routes and see the speed of the boat\u003c\/li\u003e\n\u003cli\u003eBright 4.3\" sunlight-readable screen and intuitive user interface\u003c\/li\u003e\n\u003cli\u003eRobust design suitable for all environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe STRIKER™ Plus 4 probe is equipped with a bright 4.3\" screen, integrated GPS, a CHIRP probe that provides sharp images and the Quickdraw Contours map software, which allows you to store up to more than 800,000 hectares of content with contours of 30 cm. The integrated GPS allows you to mark waypoints and navigate to them, in addition to seeing the speed of the boat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuickdraw Garmin Contours\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNobody knows the waters where you fish better than you and your fellow fishermen. While you fish on the coastlines and the depths, the Quickdraw Contours map software creates HD fishing maps of the places you've been to. No special knowledge is required. Now, STRIKER™ Plus 4 can store up to more than 800,000 hectares of your Quickdraw maps Contours with 30 cm contours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClarity with the CHIRP probe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe STRIKER™ Plus 4 probe includes the Garmin CHIRP probe, so you can enjoy the high levels of clarity and detail you expect from Garmin. The sharp images of the probe provide an exceptional separation of the objectives and an excellent resolution, both in deep and shallow waters. The contours of the background are more visible, even at the highest speeds, and it is possible to suppress the signal noise at great depths, which provides a more timely interpretation of what is underneath\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGPS probe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe integrated high-sensitivity GPS can locate and maintain your position anywhere in the water. Likewise, GPS allows you to mark waypoints for different places. In this way, if you find a place where the fish bite the hook, you can mark it to return at another time. Mark the docks, docks and other places on the lake, and create routes that will take you back to them next time. Thanks to the GPS, the STRIKER™ Plus 4 can also show your speed on the screen, so you can be sure that the boat moves at the right speed for the hook used or in the zones of limited speed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade for you\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn addition to turning fishing into a piece of cake, the STRIKER™ Plus 4 is also designed to be used in any environment. The bright and sunlight-readable screen allows you to clearly see what is under the boat, even on the sunniest days. In addition, the larger size of the screen also allows you to better see what is happening under the boat. Thanks to the intuitive user interface, scrolling to any function is very easy, so you will always be prepared for anything in the water.\u003c\/p\u003e\u003c!-- sr-faq v=1 vendor=garmin source_sha256=831f5b73a190d81bf1551027e4c493a08e1c1d388ef63f80ad2639191df4c0ff --\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003eCan I cut the transducer cable during installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYou should not cut the transducer cable. Doing so will void your warranty.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWho should install the Garmin STRIKER Plus 4 or its transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIt is recommended to have a qualified marine installer perform the installation to ensure proper setup and avoid potential damage.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do I secure the transducer cable on a trolling motor installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eUse waterproof tape to secure the cable to the trolling motor shaft, ensuring it avoids pinch points.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should I test for water leaks after installation?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAfter installation, check for leaks around screw holes added below the water line before leaving your boat in water for an extended period.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat mounting surface considerations should I follow for the transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMount the transducer parallel to the waterline and avoid areas with strakes, struts, fittings, water inlets\/discharge, or turbulent water.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould I apply sealant when mounting the transducer and cable entry?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eApply marine sealant to all screw threads and fill cable pass-through holes with marine sealant.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould you update the software after installing a new transducer?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eYes, you must update the chartplotter software after installing the device.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should I prepare the transducer for long-term water exposure?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eLightly sand and clean the transducer with isopropyl alcohol, then coat it and the mounting hardware with water-based anti-fouling paint.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow much clearance should I provide from the propeller?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eMount the transducer at least 38 cm (15 in.) from the propeller and avoid mounting it in the path of the propeller.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should the transducer be mounted relative to the waterline on fiberglass or aluminum hulls?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eFor fiberglass, extend 3.5 mm (0.125 in.) below; for aluminum, extend 10 mm (0.375 in.) below the hull.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat precautions should be taken for cable routing?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eRoute cables away from ignition wires, batteries, and high-energy wires to reduce noise and interference.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat drill bit size should I use for routing the 4-pin transducer cable?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eFor a 4-pin cable, use a 16 mm (5\/8 in.) drill bit for the pass-through hole.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should transducer depth be adjusted for optimal performance?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eAdjust the depth in small increments downward until signal degradation is eliminated, or move to another location if needed.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat safety responsibility does the user have while using this device?\u003c\/summary\u003e\u003cdiv\u003e\u003cp\u003eIt is the user's responsibility to operate the vessel safely. This device is a navigational aid and does not replace safe boating practices.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Can I cut the transducer cable during installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"You should not cut the transducer cable. Doing so will void your warranty.\"}}, {\"@type\": \"Question\", \"name\": \"Who should install the Garmin STRIKER Plus 4 or its transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is recommended to have a qualified marine installer perform the installation to ensure proper setup and avoid potential damage.\"}}, {\"@type\": \"Question\", \"name\": \"How do I secure the transducer cable on a trolling motor installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Use waterproof tape to secure the cable to the trolling motor shaft, ensuring it avoids pinch points.\"}}, {\"@type\": \"Question\", \"name\": \"How should I test for water leaks after installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"After installation, check for leaks around screw holes added below the water line before leaving your boat in water for an extended period.\"}}, {\"@type\": \"Question\", \"name\": \"What mounting surface considerations should I follow for the transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Mount the transducer parallel to the waterline and avoid areas with strakes, struts, fittings, water inlets\/discharge, or turbulent water.\"}}, {\"@type\": \"Question\", \"name\": \"Should I apply sealant when mounting the transducer and cable entry?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Apply marine sealant to all screw threads and fill cable pass-through holes with marine sealant.\"}}, {\"@type\": \"Question\", \"name\": \"Should you update the software after installing a new transducer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, you must update the chartplotter software after installing the device.\"}}, {\"@type\": \"Question\", \"name\": \"How should I prepare the transducer for long-term water exposure?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Lightly sand and clean the transducer with isopropyl alcohol, then coat it and the mounting hardware with water-based anti-fouling paint.\"}}, {\"@type\": \"Question\", \"name\": \"How much clearance should I provide from the propeller?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Mount the transducer at least 38 cm (15 in.) from the propeller and avoid mounting it in the path of the propeller.\"}}, {\"@type\": \"Question\", \"name\": \"How should the transducer be mounted relative to the waterline on fiberglass or aluminum hulls?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"For fiberglass, extend 3.5 mm (0.125 in.) below; for aluminum, extend 10 mm (0.375 in.) below the hull.\"}}, {\"@type\": \"Question\", \"name\": \"What precautions should be taken for cable routing?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Route cables away from ignition wires, batteries, and high-energy wires to reduce noise and interference.\"}}, {\"@type\": \"Question\", \"name\": \"What drill bit size should I use for routing the 4-pin transducer cable?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"For a 4-pin cable, use a 16 mm (5\/8 in.) drill bit for the pass-through hole.\"}}, {\"@type\": \"Question\", \"name\": \"How should transducer depth be adjusted for optimal performance?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Adjust the depth in small increments downward until signal degradation is eliminated, or move to another location if needed.\"}}, {\"@type\": \"Question\", \"name\": \"What safety responsibility does the user have while using this device?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is the user's responsibility to operate the vessel safely. This device is a navigational aid and does not replace safe boating practices.\"}}]}\u003c\/script\u003e\u003c!-- \/sr-faq --\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51626167959889,"sku":"010-01870-01","price":3306000.0,"currency_code":"IDR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4434\/4913\/files\/garmin-striker-plus-4-captura-de-pantalla-2024-05-22-a-las-11.04.42.png?v=1754730135","url":"https:\/\/www.sailrace.com\/th-sea\/products\/garmin-striker-plus-4","provider":"SailRACE","version":"1.0","type":"link"}