The Force Kraken trolling motor is engineered with a longer shaft for boats with high freeboards and a pivot-style mount for easy installation in vessels where bow space is limited.
High powered
With 100 lbs of thrust, Force Kraken is the most powerful trolling motor on the market.
Designed to endure
The sturdy composite shaft and all components are built to endure harsh marine environments and have advanced corrosion and saltwater protection.
Power that lasts
Efficient brushless motor design has longer run times than brushed motors and allows you to focus on fishing — and not running out of battery.
PURPOSE-BUILT Design
This trolling motor is optimized to operate in rough open-water conditions, at either 24 or 36 volts, thanks to the powerful and efficient brushless motor design.
Livescope™ Sonar cable management
Keep your LiveScope sonar cable protected by running the transducer cable through the trolling motor shaft (accessory purchase required).
Perfect for bay boats and center consoles
Get easy installation where bow space is limited, thanks to the pivot-style mount. The 48", 63”, 75” and 90” shaft lengths accommodate many different boat sizes and deck configurations.
Stay put
The anchor lock provides our most precise boat positioning technology with multi-band GPS signal reception to help keep the boat in one place.
Floating remote
Use the included remote to help you navigate from anywhere in the boat with our simple point -and-go technology.
Smartwatch integration
Connect your compatible Garmin smartwatch to control steering, anchor lock and more from your wrist.
Wireless integration
Connect to your compatible chartplotter to create and follow routes for the trolling motor to follow while you fish.
Whisper quiet
Don’t spook the fish; the motor is extremely quiet above and below the water.
Content:
- Force® Kraken Trolling Motor
- Remote
- High efficiency propeller
- Assembly and mounting hardware
- Stabilizer (included with 90" only)
- Documentation
Specifications:
General |
| Color | White |
| For use in | Freshwater, brackish water and saltwater |
| Mount style | Pivot-style mount |
| Max thrust | 100 lbs per ISO 13342 using high efficiency propeller at 36 V
80 lbs per ISO 13342 using high efficiency propeller at 24 V |
| Voltage | 24 V or 36 V |
| Electric steering | Yes |
| Built-in heading sensor | Yes |
| Built-in GPS | Yes (dual frequency GPS) |
| Warranty | 3-year, limited lifetime on shaft |
| Water rating | IPX7 |
| Mounting location | Bow |
| Wireless remote | Yes (included) |
| Foot pedal compatible | Yes |
| Battery indicator | Yes |
| Variable speed control | Yes (20 steps) |
| Lighted direction indicator | Yes |
| Deck stabilizer | Yes (90" only) |
| quatix remote control supported | Yes |
Sonar Features |
| LiveScope cable integration | Yes (LiveScope transducer and Kraken Mounting Bracket purchases required) |
Autopilot Features |
| Route following | Yes |
| Anchor lock | Yes |
| Smart Anchor Lock features | Yes |
| Anchor lock jog | Yes |
| Heading hold | Yes |
| Cruise control | Yes |
| Gesture features | Yes (manual+, heading hold+, jog+) |
Foot Pedal Features |
| Dimensions | 12" L X 9" w X 4 1/2" h |
| Wireless communication | Yes |
| Power installation | 12 V/24 V/36 V wired or battery powered (2 AA) |
| AA battery life | 1 full season |
| Water rating | IPX7 |
| Adjustable pedal resistance | Yes |
Remote Features |
| Display size | 1.2" (30.2 mm) diameter |
| Display resolution | 240 X 240 pixels |
| Display type | Color, sunlight-visible, transflective memory-in-pixel (MIP) |
| Chartplotter user-programmable keys | Yes |
| Autopilot feature control | Yes |
| Water rating | IPX7 |
| Battery life | Typical use with backlight at low, 43 weeks |
| Floats | Yes |
FAQs
What is the recommended torque for installing the LiveScope mounting puck?
Tighten the included hex head screw for the mounting puck to 7 N-m (62 lbf-in) using a torque wrench.
Should you apply marine grease during installation?
Yes, apply the included marine grease to new blue and black motor gaskets before installing them.
What cables should be bundled using electrical tape during installation?
Only bundle the power and any existing transducer cables in a triangular pattern—not the LiveScope cable.
Is it recommended to print your own mounting template?
It is not recommended. Use the template provided in the product box to ensure a precise fit and avoid mounting errors.
Are original screws reused when reinstalling the nose cone and skeg?
Yes, keep all screws and parts removed, as you must reinstall them when reassembling the skeg and nose cone.
What must be done with cable grommets during reassembly?
Apply a thin film of grease to the grommets and cable sections passing through before installing into the adapter.
What steps should you take if printing a mounting template?
If printing a template, print at 100% scaling on paper larger than the template, and use a ruler to check at least one dimension line for accuracy.
Is Garmin responsible for mounting surface damage due to template errors?
Garmin is not responsible for damage or expenses if the mounting surface is miscut from not following template instructions.
Does mounting the LiveScope transducer affect stow direction?
Once the LiveScope transducer is mounted, the motor can only stow in one direction—choose your side carefully.
What safety step must be done before servicing the trolling motor?
Always disconnect the trolling motor from the battery before performing any service to avoid electrical shock or damage.
What side can the LiveScope transducer be mounted on?
You may mount your LiveScope transducer on either the starboard side or the port side of your trolling motor shaft.
What should be done if routing cables through the shaft is difficult?
If resistance is felt, back the cables out by 2.5 cm (1 in.) and try again to avoid damaging connectors.
What torque is specified for tightening the propeller drive motor bolts?
Tighten all six bolts to 4 N-m (35 lbf-in) using a torque wrench for correct assembly.
What should you do with removed screws when detaching the propeller drive motor?
Dispose of the six screws; new screws, washers, and O-rings are provided in the kit for reassembly.
How much LiveScope cable should be left for repositioning?
Leave approximately 15 to 20 cm (6 to 8 in.) of LiveScope cable between the adapter and transducer.
Should a thread-locking compound be used during reassembly?
Yes, apply medium-strength thread-locking compound like LOCTITE 243 to the bolt threads before reassembly.
