완벽한 안전 항해
AIS 클래스 B 트랜스폰더는 레크리에이션 보트부터 해상 항해 선장까지 모든 종류의 보트와 선원을 위한 필수 장비입니다. AIS 시스템의 핵심인 트랜스폰더를 사용하면 VHF 전파를 통해 자동으로 데이터를 전송하고 수신할 수 있습니다. 따라서 이는 보트와 인근 선박 및 장비를 갖춘 해안 스테이션 간에 정보를 교환하는 인터페이스 역할을 합니다. 이 장비 덕분에 밤에 항해하거나 교통량이 많은 지역에서 항해할 때 시야가 좋지 않은 경우에도 주변 보트의 AIS 화면에 보트가 표시됩니다.
범선에 클래스 B AIS를 설치하는 이유는 무엇입니까?
➡️ 가시성 확보: GuardXP 응답기는 자동으로 위치, 방향 및 정보를 전송합니다. 속도.
➡️ 항해 지역 개요 파악: 주변의 다른 보트의 움직임을 관찰하여 충돌 위험을 더 잘 예측할 수 있습니다.
➡️ 쉬운 설치: 작고 눈에 띄지 않으며 NavXP 차트 플로터와 호환 가능 애플리케이션을 통해 휴대전화에 연결할 수 있는 온보드 컴퓨터.
➡️ 신뢰할 수 있고 검증된 기술: 효율적인 전송을 위해 CS-TDMA 프로토콜을 사용하여 국제 표준을 준수합니다.
기내 필수 장비 - 상황에 관계없이 보고 볼 수 있습니다!AIS 트랜스폰더 GuardXP 및 GuardXP+(다양한 범위)는 매우 높은 수신 감도. AIS 및 GPS 데이터를 브로드캐스트하는 응답기의 WiFi 네트워크를 통해 장치의 구성 및 유지 관리 인터페이스에 쉽게 액세스할 수 있습니다.당사는 AIS 클래스 B 응답기의 두 가지 모델을 제공합니다.
- GuardXP(2와트) (PF000348)
- 5와트 GuardXP+ (PF000349)
| Dimensions (H x L x D) | 220 x 135 x 45 mm |
| Weight | 200 g with power supply and NMEA 2000 cables |
| Power supply | 12 ou 24Vdc |
| Cable | Ø 5 mm, 6 conductors, 75 cm length |
| Consumption |
• GuardXP : 2 watts • GuardXP+ : 5 watts |
| Connectors |
• NMEA 2000 connector: cable with M12 – 5-pin male plug, 1 m length • Multiplexer NMEA: NMEA0183 output at 38400 baud, NMEA0183 input at 4800 baud |
| Waterproofing | IP54 water rating (dust-proof and resists splashing water from any direction) |
| Temperatures |
Operating temperature: −10°C to +50°C Storage temperature: −20°C to +60°C |
The AIS Class B transponder is an autonomous onboard communications device, capable of automatically receiving and transmitting your sailboat’s navigation data thanks to an integrated GPS and VHF interface.
Our AIS transponders are equipped with several connection ports:
- 1 NMEA 2000 connector: for connecting, for example, a chartplotter
- 1 NMEA 0183 multiplexer: NMEA 0183 input/output for interfacing with displays, sensors, etc.
- 1 GPS antenna (without bracket): supplied with our transponders
- 1 AIS / VHF antenna (not supplied): the VHF antenna can be used for both the VHF radio and the AIS transponder by installing a suitable VHF antenna splitter such as our SplitXP.
Accessories included:
- 1 power cable of 75 cm
- 1 NMEA 2000 cable of 1 m
- 1 GPS antenna (without bracket) with 10 m cable and a FME/TNC adapter
- 1 PL259/BNC adapter for connecting your VHF antenna