구매 후 문제가 발생한 경우, 제조사와 함께 최선의 해결책을 결정할 수 있도록 team@sailrace.com으로 문의해 주세요.
Couldn't load pickup availability
설명
The Panoptix PS70 stainless steel thru-hull transducer is powered by Garmin RapidReturn™ sonar, which gives you live sonar views up to 1,000’ below the surface.
Garmin Rapidreturn Sonar
This sonar sends multiple simultaneous pings through the water column. The result is live sonar capabilities up to 1,000’, giving deep sea anglers a real-time view of what’s below the surface.
LIVEVÜ™ Down Sonar
See real-time live sonar images up to 1,000’. With Garmin RapidReturn, anglers can see small baitfish and target game fish in real time. The wide 120-degree beam angle covers huge areas of water.
Traditional Sonar
View crisp, clear fish arches with excellent separation of targets under the boat.
TRIPLE-BEAM Sonar
Get a 3-way traditional sonar split that gives sonar returns from the port and starboard directions, as well as targets directly under the boat, in an easy-to-understand traditional sonar view. Adjust the beam angles to fine-tune your 3 columns of sonar data.
REALVÜ™ 3D Sonar
Historical scanning technology helps find fish and build a map of the ocean floor while your boat is moving. It shows the entire water column you have passed over in 3D, from the bottom to the surface and all fish in between. The True Motion 3D sonar returns feature now follows the vessel’s course over ground.
Quickdraw Contours Feature
Survey areas of the ocean floor in great detail. New QuickDraw Contours feature improvement allows users to survey wide swaths of the ocean floor, even at depths up to 1,000’.
Live sonar display rate
Panoptix PS70 will display at a minimum of 10 frames per second (6 to 8 times faster than the competition), which results in faster sonar returns.
Wide sonar beam
Locate bait and fish quickly with wide 120-degree by 8-degree sonar beam, which covers more of the water column at once.
Image stabilization
An internal sensor will stabilize sonar returns, so you see a clear view even in rough waters.
THRU-HULL Installation
The stainless steel thru-hull transducer can be flush mount or pocket mounted. A fairing block allows for deadrise angles of 0 to 20 degrees. The optional fairing block can survive high operating speeds and withstand the rough conditions found offshore.
HIGH-POWER Sonar
800-watt power output gives you stronger sonar penetration through the water.
Content:
PS70 down-looking thru-hull down transducer
Fairing block
Stainless steel thru-hull mounting hardware
Power cable
Network cable 40 ft (12 meters) with network adapter
Documentation
Specifications:
General
Transducer beamwidth
120° X 8°
Transducer cable length
8 ft + 40 ft extension
Dimension
8.50" X 4.49" X 9.61" (21.6 X 11.4 X 24.4 cm)
Weight
10.12 lbs (4.6 kg)
Temperature range
0° C to 40° c
Electrical Features
Power input
10-35 V
Power usage
35 W
Fuse
7.5 A
Sonar Features
Frequency
190-210 Khz
Transmit power
800 W
Maximum depth
Saltwater: 1000' (304.8 m)
Sonar Type
Multi-beam phased array
Connections
Garmin Marine Network Ports
1 (small connector)
Sonar Modes
RealVü 3D Historic
3-beam traditional
Traditional sonar source
FAQs
Is the anti-rotation bolt required for installation?
Yes, the included anti-rotation bolt must be used during installation to prevent the transducer from rotating while the boat is moving.
What tools are required for typical installation?
Tools include a drill, drill bits, wrenches, marine sealant, sandpaper, masking tape, and optionally a bandsaw for the fairing block.
What is the purpose of using marine sealant during installation?
Apply marine sealant on all water paths to ensure a watertight seal between the transducer, hull, bolts, and fairing block.
What hull materials can the Panoptix PS70 transducer be installed in?
The transducer is compatible with cored fiberglass, non-cored fiberglass, and metal hulls when installed according to instructions.
How do I measure the hull deadrise angle before installation?
Use a smartphone app, angle finder, protractor, or digital level at the chosen location. Do not exceed 20 degrees deadrise.
What must be done when installing in a metal hull?
You must use the included isolation bushings to fully isolate the transducer from the hull and prevent electrolytic corrosion.
Can the transducer be installed near engines or in the engine room?
No, do not install near the engine, in the engine room, or other hot locations to prevent overheating or interference.
How should I select a mounting location for the transducer?
Pick a location with a deadrise angle of 20 degrees or less, in clean water away from turbulence caused by strakes, fittings, or propellers.
What cleaning products should NOT be used on the transducer?
Do not use solvents such as mineral spirits, acetone, Methyl Ethyl Ketone (MEK), or a power sander/pressure washer on the transducer.
Who do I contact for help with installation, servicing or advice?
Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase.
자주 묻는 질문
We are here to help sailors like you.
If you don't find an answer to your specific questions, please don't hesitate to contact us.
온라인 구매 대신 견적 송장을 요청할 수 있나요?
내부 구매 절차를 따르는 회사나 기존의 "오프라인" 절차에 따라 구매하는 것이 더 안심되는 개인 고객의 경우, 관심 있는 품목과 수량을 상세히 기재한 견적 송장을 언제든지 요청하실 수 있으며, 필요에 따라 청구 주소와 배송 주소, 전화번호를 제공하시면 보다 정확한 배송 견적과 구매 완료 후 가장 빠른 배송에 도움이 됩니다.
세계에서 가장 큰 사이버보안 예산을 보유한 NSA도, 언론 보도를 통해 아실 수도 있듯이, 최근 해킹을 당했습니다. 따라서 사이버보안에 관해서는 누구도 어떤 것도 100% 보장할 수 없습니다.
그렇지만 저희는 개인정보 보호와 보안을 매우 중요하게 생각하며, 고객님의 정보를 보호하기 위해 많은 고급 기술을 마련하고 도입했습니다(전문 기술 용어가 있어 죄송합니다 ...):
저희 플랫폼 업데이트는 전자상거래 분야의 글로벌 선도 기업인 Shopify에서 자동으로 관리합니다. 최신 Shopify 규정 준수 보고서를 확인하세요.
저희 시스템은 선도적인 DNS 및 인터넷 보안 제공업체인 CloudFlare를 통해 DNS 수준에서 DDoS 공격, 중간자 공격 및 기타 여러 공격으로부터 보호됩니다. 자세한 정보는 여기에서 확인하세요.
추가적인 보안 및 개인정보 보호 조치도 저희가 직접 시행하고 있습니다.
주문 후 정확히 어떤 절차가 진행되나요?
You will receive a confirmation e-mail, including all items ordered.
Also, our support team receives one and the provisioning workflow is initiated.
A controller will be internally assigned to your specific order, in charge of personally assuring the picking, shipping, and dozens of details required to ensure the best experience for you.
Once the shipment process begins, you will start receiving notifications both by email and SMS on your mobile phone constantly updating about shipment status, which will be specially relevant in cross-border shipments, for yachts in transit, and to avoid many different issues than can occur during domestic and international shipments. Our delivery guarantee without issues exceeds 99,5%, greatly increasing the sector average, due to continuous supervision of the shipping agents and constant updates provided to our customers, ensuring both parties are acknowledged about each shipping process step.
You will be also able to access order status and shipping details directly from the "My Account" section.
