The Force Kraken trolling motor is engineered with a longer shaft for boats with high freeboards and a pivot-style mount for easy installation in vessels where bow space is limited.
High powered
With 100 lbs of thrust, Force Kraken is the most powerful trolling motor on the market.
Designed to endure
The sturdy composite shaft and all components are built to endure harsh marine environments and have advanced corrosion and saltwater protection.
Power that lasts
Efficient brushless motor design has longer run times than brushed motors and allows you to focus on fishing — and not running out of battery.
PURPOSE-BUILT Design
This trolling motor is optimized to operate in rough open-water conditions, at either 24 or 36 volts, thanks to the powerful and efficient brushless motor design.
Livescope™ Sonar cable management
Keep your LiveScope sonar cable protected by running the transducer cable through the trolling motor shaft (accessory purchase required).
Perfect for bay boats and center consoles
Get easy installation where bow space is limited, thanks to the pivot-style mount. The 48", 63”, 75” and 90” shaft lengths accommodate many different boat sizes and deck configurations.
Stay put
The anchor lock provides our most precise boat positioning technology with multi-band GPS signal reception to help keep the boat in one place.
Floating remote
Use the included remote to help you navigate from anywhere in the boat with our simple point -and-go technology.
Smartwatch integration
Connect your compatible Garmin smartwatch to control steering, anchor lock and more from your wrist.
Wireless integration
Connect to your compatible chartplotter to create and follow routes for the trolling motor to follow while you fish.
Whisper quiet
Don’t spook the fish; the motor is extremely quiet above and below the water.
Content:
Force® Kraken Trolling Motor
Remote
High efficiency propeller
Assembly and mounting hardware
Stabilizer (included with 90" only)
Documentation
Specifications:
General
Color
White
For use in
Freshwater, brackish water and saltwater
Mount style
Pivot-style mount
Max thrust
100 lbs per ISO 13342 using high efficiency propeller at 36 V 80 lbs per ISO 13342 using high efficiency propeller at 24 V
Voltage
24 V or 36 V
Electric steering
Yes
Built-in heading sensor
Yes
Built-in GPS
Yes (dual frequency GPS)
Warranty
3-year, limited lifetime on shaft
Water rating
IPX7
Mounting location
Bow
Wireless remote
Yes (included)
Foot pedal compatible
Yes
Battery indicator
Yes
Variable speed control
Yes (20 steps)
Lighted direction indicator
Yes
Deck stabilizer
Yes (90" only)
quatix remote control supported
Yes
Sonar Features
LiveScope cable integration
Yes (LiveScope transducer and Kraken Mounting Bracket purchases required)
What is the recommended torque for installing the LiveScope mounting puck?
Tighten the included hex head screw for the mounting puck to 7 N-m (62 lbf-in) using a torque wrench.
Should you apply marine grease during installation?
Yes, apply the included marine grease to new blue and black motor gaskets before installing them.
What cables should be bundled using electrical tape during installation?
Only bundle the power and any existing transducer cables in a triangular pattern—not the LiveScope cable.
Is it recommended to print your own mounting template?
It is not recommended. Use the template provided in the product box to ensure a precise fit and avoid mounting errors.
Are original screws reused when reinstalling the nose cone and skeg?
Yes, keep all screws and parts removed, as you must reinstall them when reassembling the skeg and nose cone.
What must be done with cable grommets during reassembly?
Apply a thin film of grease to the grommets and cable sections passing through before installing into the adapter.
What steps should you take if printing a mounting template?
If printing a template, print at 100% scaling on paper larger than the template, and use a ruler to check at least one dimension line for accuracy.
Is Garmin responsible for mounting surface damage due to template errors?
Garmin is not responsible for damage or expenses if the mounting surface is miscut from not following template instructions.
Does mounting the LiveScope transducer affect stow direction?
Once the LiveScope transducer is mounted, the motor can only stow in one direction—choose your side carefully.
What safety step must be done before servicing the trolling motor?
Always disconnect the trolling motor from the battery before performing any service to avoid electrical shock or damage.
What side can the LiveScope transducer be mounted on?
You may mount your LiveScope transducer on either the starboard side or the port side of your trolling motor shaft.
What should be done if routing cables through the shaft is difficult?
If resistance is felt, back the cables out by 2.5 cm (1 in.) and try again to avoid damaging connectors.
What torque is specified for tightening the propeller drive motor bolts?
Tighten all six bolts to 4 N-m (35 lbf-in) using a torque wrench for correct assembly.
What should you do with removed screws when detaching the propeller drive motor?
Dispose of the six screws; new screws, washers, and O-rings are provided in the kit for reassembly.
How much LiveScope cable should be left for repositioning?
Leave approximately 15 to 20 cm (6 to 8 in.) of LiveScope cable between the adapter and transducer.
Should a thread-locking compound be used during reassembly?
Yes, apply medium-strength thread-locking compound like LOCTITE 243 to the bolt threads before reassembly.
Who do I contact for help with installation, servicing or advice?
Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase.
คำถามที่พบบ่อย
We are here to help sailors like you.
If you don't find an answer to your specific questions, please don't hesitate to contact us.
For companies following internal purchasing processes or for individuals who feel better purchasing following traditional, "offline" processes, our customers can always ask for a proforma invoice, detailing the items you're interested in, their quantities, and, optionally, providing the billing and shipping address, and a phone number, for a better shipping estimate and fastest delivery once purchased.
The NSA, with the biggest cybersecurity budget in the world, has been hacked recently, as you might know from the press. So nobody can 100% ensure anything on cybersecurity.
That said, we are very privacy and security-conscious and have done and deployed many advanced technologies to keep your information protected (sorry for the techy terms ...):
Our platform updates are automatically managed by Shopify, the global leader in e-commerce. Access the latest Shopify Compliance reports.
Our system is protected at the DNS level by CloudFlare, the leading DNS and Internet Security provider, from DDoS attacks, man-in-the-middle and many other attacks. See detailed info here.
Complementary security and privacy measures are in place directly by us.
หลังจากสั่งซื้อแล้วจะเกิดอะไรขึ้นบ้าง?
You will receive a confirmation e-mail, including all items ordered.
Also, our support team receives one and the provisioning workflow is initiated.
A controller will be internally assigned to your specific order, in charge of personally assuring the picking, shipping, and dozens of details required to ensure the best experience for you.
Once the shipment process begins, you will start receiving notifications both by email and SMS on your mobile phone constantly updating about shipment status, which will be specially relevant in cross-border shipments, for yachts in transit, and to avoid many different issues than can occur during domestic and international shipments. Our delivery guarantee without issues exceeds 99,5%, greatly increasing the sector average, due to continuous supervision of the shipping agents and constant updates provided to our customers, ensuring both parties are acknowledged about each shipping process step.
You will be also able to access order status and shipping details directly from the "My Account" section.
