Harken Low-Load Furling System — 3mm Luff Wire

Harken® Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without removing the headstay. Swivels are independent of the headstay, allowing you to tension the luff separately from the mast rake. Pin-to-pin length (mm) 64 mm
Pin-to-pin length (in) 2 1/2 in
Drum Ø (mm) 73 mm
Drum Ø (in) 2 7/8 in
Maximum line Ø (mm) 4 mm
Maximum line Ø (in) 5/32 in
Jaw width (mm) 8 mm
Jaw width (in) 5/16 in
Maximum luff wire Ø (mm) 3 mm
Maximum luff wire Ø (in) 1/8 in
Clevis pin Ø (mm) 6.4 mm
Clevis pin Ø (in) 1/4 in
Weight (g) 215 g
Weight (oz) 7.6 oz
Maximum working load (kg) 227 kg
Maximum working load (lb) 500 lb
Boat length – monohull (m) Under 4.9 m
Boat length – monohull (ft) Under 16 ft
Includes upper swivel 162
Includes drum 163
Footnote Includes drum and upper swivel. Does not include hoistable swivel.

Brand	HARKEN
SKU	434
GTIN	097653073543

The following products are from the same Category as this one:

[ywqa_questions]