Tylaska
Tylaska Boomkicker BOOMKICKER WITH FITTINGS
- नियमित मूल्य
- Rs. 45,500.00
- सेल मूल्य
- Rs. 45,500.00
- नियमित मूल्य
- Rs. 50,600.00
B2B and VAT Deduction
If you are a business deducting VAT in the European Union, register here and enter your VAT Id before purchase to deduct it on checkout.
If you are a professional in the marine sector and want to explore a partnership contact us.
SKU:TYBK-K1000
पिकअप उपलब्धता लोड नहीं हो सकी
Description
Features:
- Robust fiberglass and aluminum construction
- Suggested Boat Size – 27-30 ft
- Initial Pin to Pin – 45 in
- Maximum Pin to Pin – 40 in
- Maximum Force (1) – 400 lb
- Stroke –
- Initial (2) – 15 in
- Min (3) – 6 in
Specifications:
The Boomkicker uses two coated solid fiberglass spring rods to provide the force necessary to support the boom and mainsail. The rods are clamped into teflon coated, anodized aluminum end pieces and attached to universal mast and boom fittings. Fittings are included along with machine screw fasteners, the proper drill and tap and hex wrench. The mast fitting includes a round slide which, used in the luff groove, avoids drilling into the mast. Flat slides in varying widths are available from the factory. The slides can often be inserted at the sail opening above the gooseneck and slid down reassembling the fitting in position. If slides are not usable, the fitting can be attached directly to the mast using the same drill and tap provided for the boom. The custom extruded boom track is contoured to fit both round and flat bottom booms. The track has an adjustable clevis pin to set the maximum height the Boomkicker will lift the boom. The track length forward of the pin allows the boom to move higher if needed.
Installation Instructions – Boomkicker® Model K1000
Important Note: To avoid undue stress on the boom fitting, it’s recommended that booms be fixed in the upright position. If the boom can roll about its’ central axis, please refer to Roll Stop Fitting Instructions
Recommended Installation Tools: Phillips Screwdriver; Fine Tooth Hacksaw; Center Punch; Rule; Variable Speed Reversible Drill and Blue Locktite.
| 1. Setup Boom Height: Use the main halyard to support the boom above its highest operating position, or a desired height when moored or docked. At this time, check that the Model K1000 is correct. The min. length is 40″ (102cm) pin to pin and the max. weight it can support is approximately 34 lbs. (15kg) measured at the outboard end of the boom with the main sail flaked as stored. 2. Position Boomkicker: The Boomkicker works by flexing upward and when straight, it is at the top of its travel. Install the Boomkicker with the screw head side of rod clamps facing up to flex upward away from the vang. With the boom height set, position the Boomkicker with fittings alongside the vang triangle to see how it fits. Position is not critical so long as it does not interfere with the vang. It’s recommended that both the vang and the Boomkicker make an angle of between 30o and 45o with the boom. Mark the location for the mast fitting. |
 |
| 3. Install Mast Fitting: The mast fitting comes with a luff grove slide to avoid drilling the mast. Different diameters and flat slides are available on the website or by phone. See part list. If usable, after disassembly from the fitting, the slide can often be inserted at the mast opening for the sail and dropped or lowered with a string. If the mast is out of the boat, the slide may be inserted from the base of the mast. Reassemble the mast fitting at the desired location and tighten the screws. If the slide is unusable, the bracket may be screwed directly to the mast. Extra long screws are available if needed to pass through the groove. Use the #7 drill and the 1/4-20 tap provided, with the mast fitting bracket as a guide. Locktite is recommended on threads. |  |
| 4. Shorten if Necessary: If the Boomkicker is too long, we recommend shortening the rods at the mast end so any cut ends are less visible. Loosen the rod clamp with the provided hex-key and slide the extension up the rods until there is a good fit. The bottom half of the clamp fittings for each extension have embossed stops to prevent slipping. Do not shorten total length more than 5″ (12.5cm). Cut off extra rod length equally from both rods with a fine tooth hacksaw. Before tightening the clamps, check the rod ends are against the embossed stops and the clamps/extensions are not twisted relative to each other. |  |
| 5. Install Boom Fitting: Make sure the rod clamps at both ends are tight. Then attach the Boomkicker to the mast fitting, and the slide and track at the boom end. The angle on the track goes forward, the stop in aft. There are 3 standard choices for the stop with the initial position in the middle for later adjustment if needed. If necessary more stop positions can be drilled using the inscribed line along the side of the track for the 3/16″ diameter pin. With the Boomkicker in position and slid back against the stop pin, and with the track centered under the boom, mark one hole. Then center punch, drill and tap. Attach the track, recheck position, then drill and tap the remaining holes using the track as a guide. Use Locktite on threads. Hint: Once installed, to attach the Boomkicker, it’s usually easier to slide the Boomkicker into the boom track first, then attach it to the mast fitting, rather then attaching to the mast first. 6. Check Return Force: After installation, check return force by pushing down on the end of the boom. The amount of support desired is a personal preference. For reference, with the sail flaked, using about 10 to 12 lbs.(4.5 to 5.4 kgs) to pull the aft end of the boom down seems like a good balance between boom support versus tension required to pull on the vang. More support may be desired with a bimini or if crew use the boom for support with the sail down. Less support may be desired if the mainsail is not stored on the boom or the Boomkicker is used to just lift the boom in light air for sail shape. If less or more force is needed, optional spring rods are available on our website. The purpose of the Boomkicker is to support the boom so the boom topping lift can be eliminated along with the chafe, windage, hangups and adjustments. If needed in unique circumstances, such as motoring in waves with the mainsail down, the main halyard can be attached to the aft end of the boom and tightened for further support. 7. Boomkicker orientation: The Boomkicker produces the same force flexing up or down. Flexing down may provide a better view of instruments on the back of the mast. If necessary as rods flex down, vang lines can run between them. To flex down have rod clamp screw heads, facing down. Leave fittings swivel and slider orientation as is. |
 |
Full Warranty
Buy with confidence.
SailRACE.com only sells new products with full official manufacturer warranty.
If you have any issues after purchase, please contact us at team@sailrace.com to determine together with the manufacturer the best solution.
Frequently Asked Questions
We are here to help sailors like you.
If you don't find an answer to your specific questions, please don't hesitate to contact us.
Can I ask for a proforma invoice instead of purchasing online?
For companies following internal purchasing processes or for individuals who feel better purchasing following traditional, "offline" processes, our customers can always ask for a proforma invoice, detailing the items you're interested in, their quantities, and, optionally, providing the billing and shipping address, and a phone number, for a better shipping estimate and fastest delivery once purchased.
If you're interested in a proforma invoice, please use the following form.
Which payment methods are accepted in the Online Shop?
We accept credit and debit cards, PayPal and also Apple Pay.
You can also pay by bank transfer, selecting this payment method when checkout. Once the order has been placed without paying money, in the next screen we will provide you the bank information required for the transfer.
Don't hesitate to contact us if you want to do a bank transfer.
How long will delivery take?
We only use first-class delivery carriers, like UPS and DHL. There's a "Express Delivery" option for many shipping destinations available.
It should not take more than 2-4 days to any European location, 3-6 days to any USA-based location, and 3-7 days worldwide.
When you've placed your order, you can follow-up the shipping on the "My Account" section, with detail information about parcel status.
We will also notify you by email or SMS continously about each shipping activity.
Don't hesitate to contact us if you want products to be shipped using your own carrier.
How secure is shopping in the Online Shop? Is my data protected?
The NSA, with the biggest cybersecurity budget in the world, has been hacked recently, as you might now from the press. So nobody can 100% ensure anything on cybersecurity.
That said, we are very privacy and security-conscious and have done and deployed many advanced technologies to keep your information protected (sorry for the techy terms ...):
- Our platform updates are automatically managed by Shopify, the global leader in e-commerce. Access the latest Shopify Compliance reports.
- Our system is protected at the DNS level by CloudFlare, the leading DNS and Internet Security provider, from DDoS attacks, man-in-the-middle and many other attacks. See detailed info here.
- Complementary security and privacy measures are in place directly by us.
What exactly happens after ordering?
You will receive a confirmation e-mail, including all items ordered.
Also, our support team receives one and the provisioning workflow is initiated.
A controller will be internally assigned to your specific order, in charge of personally assuring the picking, shipping, and dozens of details required to ensure the best experience for you.
Once the shipment process begins, you will start receiving notifications both by email and SMS on your mobile phone constantly updating about shipment status, which will be specially relevant in cross-border shipments, for yachts in transit, and to avoid many different issues than can occur during domestic and international shipments. Our delivery guarantee without issues exceeds 99,5%, greatly increasing the sector average, due to continuous supervision of the shipping agents and constant updates provided to our customers, ensuring both parties are acknowledged about each shipping process step.
You will be also able to access order status and shipping details directly from the "My Account" section.
Do I receive an invoice for my order?
Obviously yes!
On your confirmation e-mail most probably you will find a printable order statement.
When the product is shipped we will send to you the associated invoice.
You will also have it available on the "My Account" section once shipped.
If you are a VAT deductible company, you will be able to provide your VAT details at checkout.
Can I return the products I've purchased?
Obviously yes!
For individuals, law guarantees 14 days ofreturn policy regarding your orders.
Please, read the Terms and Conditions for specific requirements and the best procedure to return products included on your order.
Where are you located?
Our backoffice operations are centralized in Spain (we are placed close to Valencia and Mallorca, Mediterranean and world top sailing centers).
Due to the international nature of our waters, we are used to manage the needs of MANY international customers, whose fleet can be in Majorca, Greece, Turkey, South Africa, Australia or the Caribbean.
Our invoicing and backoffice address is:
SailRACE - INTEALIS
Paseo de la Castellana, 179, pl. 1, of. C-1
28046 - Madrid (SPAIN)
Spain
Our logistics address for returns is:
SailRACE - INTEALIS
Gran Via Tarrega Monteblanco, 98
12006 - Castellon
Spain
EU VAT ID: ES B87438123