Harken
Harken Performa Electric ST Alum Winch med dubbel funktionskontrollbox
- Ordinarie pris
- €10.792,43
- Försäljningspris
- €10.792,43
- Ordinarie pris
- €12.126,32
B2B och momsavdrag
Om du är ett företag som drar av moms i Europeiska unionen, registrera dig här och ange ditt momsregistreringsnummer före köp för att den ska dras av i kassan.
Om du är yrkesverksam inom marinsektorn och vill utforska ett partnerskap, kan du kontakta oss.
SKU:HKN-60.3STEP12H
Full garanti
Köp med förtroende.
SailRACE.com säljer endast nya produkter med fullständig officiell tillverkargaranti.
Om du får några problem efter köpet, vänligen kontakta oss på team@sailrace.com för att tillsammans med tillverkaren fastställa den bästa lösningen.
Det gick inte att ladda hämtningstillgänglighet
Beskrivning
Key details
- Product type: Performa Electric ST Alum Winch with Dual Function Control Box
- Options: Model, Voltage, Mount
- Available variants: 18
Overview
All Performa™ winches feature sandblasted drums optimized for halyard and sheeting applications using small-diameter, high-tech line. Electric Performa winches let you trim any size sail with the push of a button.
Specifications
Specifications vary by the selected variant. Use the variant table below to compare the available configurations and part numbers.
Variant details
Select the option combination that matches the required part number.
| Model | Voltage | Mount | Part No. |
|---|---|---|---|
| 60 | 12 V | Horizontal | 60.3STEP12H |
| 60 | 12 V | Horizontal (Left Mount) | 60.3STEP12HLM |
| 60 | 12 V | Vertical | 60.3STEP12V |
| 60 | 24 V | Horizontal | 60.3STEP24H |
| 60 | 24 V | Horizontal (Left Mount) | 60.3STEP24HLM |
| 60 | 24 V | Vertical | 60.3STEP24V |
| 70 | 12 V | Horizontal | 70.3STEP12H |
| 70 | 12 V | Horizontal (Left Mount) | 70.3STEP12HLM |
| 70 | 12 V | Vertical | 70.3STEP12V |
| 70 | 24 V | Horizontal | 70.3STEP24H |
| 70 | 24 V | Horizontal (Left Mount) | 70.3STEP24HLM |
| 70 | 24 V | Vertical | 70.3STEP24V |
| 80 | 12 V | Horizontal | 80.3STEP12H |
| 80 | 12 V | Horizontal (Left Mount) | 80.3STEP12HLM |
| 80 | 12 V | Vertical | 80.3STEP12V |
| 80 | 24 V | Horizontal | 80.3STEP24H |
| 80 | 24 V | Horizontal (Left Mount) | 80.3STEP24HLM |
| 80 | 24 V | Vertical | 80.3STEP24V |
FAQs
What is the warranty on the Harken Performa winch?
The product includes a limited worldwide warranty; details are in the installation and maintenance manual.
What is the recommended installation surface strength for the winch?
The winch must be installed on a flat area of the deck, reinforced if necessary to bear a load at least twice the maximum working load of the winch.
What is the recommended torque for tightening hex screws during installation?
Hex screws should be tightened to 20Nm (177 in-lb) during assembly procedures.
What is the recommended torque for tightening the hex screws during winch installation?
When assembling, tighten the six hex screws with a torque of 20 Nm (177 in-lb) during installation steps involving these screws.
How often should the winch be disassembled for maintenance?
It should be completely overhauled, cleaned, and lubricated at least every 12 months, or sooner if signs of wear are noted.
What precautions should be taken regarding the sheet entry angle during winch installation?
The sheet entry angle must be 8° with a tolerance of ±2° to avoid overrides that can damage the winch or make it inoperable, causing loss of control.
What maintenance is required regarding washing the winch?
Wash the winch frequently with fresh water after each use. Avoid caustic cleaners, solvents, polishes, or abrasive pastes on anodized, chrome, or plastic parts.
What is the recommended lubrication practice for pawls during winch maintenance?
Pawls and springs should be lightly lubricated with oil only, and no grease should be applied to pawls.
Are countersunk bolts recommended for winch installation?
No, countersunk bolts must not be used when mounting the winch on the deck.
What surface strength is recommended for installing the winch on deck?
The winch must be installed on a flat deck area reinforced to bear at least twice the maximum working load of the winch.
What is the required load bearing capacity for the deck where the winch is installed?
The deck must be reinforced to bear at least twice the maximum working load of the winch to ensure safety.
What type of bolts should be used to install the winch on the deck?
Use only A4 stainless steel (DIN 267 part11) bolts to install the winch. Bolts of other materials may corrode or lack strength, risking sudden deck failure.
What types of bolts should be used to install the winch on the deck?
Use only A4 stainless steel bolts (DIN 267 part11). Other materials may corrode or lack strength, risking winch failure causing injury or death.
What materials should be used for winch mounting bolts?
Only use A4 stainless steel bolts (DIN 267 part11) for installing the winch to prevent corrosion and ensure strength.
What material is recommended for the winch mounting bolts and why?
A4 stainless steel bolts are recommended to provide sufficient strength and corrosion resistance, preventing sudden deck failure under high loads.
What is the specified entry angle for the sheet while installing the winch?
The entry angle of the sheet must be 8° with a tolerance of ±2° to avoid sheet overrides that can damage the winch or cause it to malfunction.
How many mounting fasteners are required for installing the winch?
The winch requires six M8 socket head or hexagonal headed bolts to be securely mounted to the deck, chosen to suit the deck thickness and type.
How many fasteners are required to install the Harken Performa 60.3 ST Winch?
The winch must be bolted to the deck using six M8 bolts, either Socket Head (SH) or hexagonal headed, correctly chosen for the boat deck thickness and type.
Where should the winch drive gear be positioned when installing?
Mount the winch so the drive gear is positioned where the sheet enters the winch drum to avoid weakening the winch and potential failure causing injury.
What is the maximum working load (MWL) of the Harken Performa 60.3 ST winch?
The maximum working load (MWL) for the 60.3 ST Performa™ Winch is 1800 Kg (3968 lb). Exceeding this load can cause winch failure and serious injury.
What tool is recommended for tightening motor cable terminals to avoid over tightening?
A torque wrench is recommended to obtain a tightening torque no greater than 10 Nm (88 in-lb) for motor cable terminal nuts.
How should the winch be cleaned after use?
Wash the winch frequently with fresh water after each use, avoiding teak cleaners or caustic products. Do not use solvents or abrasive pastes on anodized or plastic parts.
How often should a complete overhaul of the winch be done?
Complete overhaul, cleaning, and lubrication should be performed at least every 12 months, with visual inspections at start and end of sailing or racing seasons.
What is the specified power ratio for the first speed gear of the winch?
The theoretical power ratio for the 1st speed gear is 9.2:1.
Who do I contact for help with installation, servicing or advice?
Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase.
Vanliga frågor
We are here to help sailors like you.
If you don't find an answer to your specific questions, please don't hesitate to contact us.
Kan jag begära en proformafaktura i stället för att köpa online?
For companies following internal purchasing processes or for individuals who feel better purchasing following traditional, "offline" processes, our customers can always ask for a proforma invoice, detailing the items you're interested in, their quantities, and, optionally, providing the billing and shipping address, and a phone number, for a better shipping estimate and fastest delivery once purchased.
If you're interested in a proforma invoice, please use the following form.
Vilka betalningsmetoder accepteras i webbutiken?
Vi accepterar kredit- och betalkort, PayPal samt Apple Pay.
Du kan även betala via banköverföring genom att välja denna betalningsmetod i kassan. När beställningen har lagts utan att betalning har gjorts, visar vi på nästa skärm de bankuppgifter som krävs för överföringen.
Tveka inte att kontakta oss om du vill göra en banköverföring.
Hur lång tid tar leveransen?
We only use first-class delivery carriers, like UPS and DHL. There's an "Express Delivery" option for many shipping destinations available.
It should not take more than 2-4 days to any European location, 3-6 days to any USA-based location, and 3-7 days worldwide.
When you've placed your order, you can follow-up the shipping on the "My Account" section, with detail information about parcel status.
We will also notify you by email or SMS continously about each shipping activity.
Don't hesitate to contact us if you want products to be shipped using your own carrier.
Hur säkert är det att handla i webbutiken? Är mina uppgifter skyddade?
The NSA, with the biggest cybersecurity budget in the world, has been hacked recently, as you might know from the press. So nobody can 100% ensure anything on cybersecurity.
That said, we are very privacy and security-conscious and have done and deployed many advanced technologies to keep your information protected (sorry for the techy terms ...):
- Our platform updates are automatically managed by Shopify, the global leader in e-commerce. Access the latest Shopify Compliance reports.
- Our system is protected at the DNS level by CloudFlare, the leading DNS and Internet Security provider, from DDoS attacks, man-in-the-middle and many other attacks. See detailed info here.
- Complementary security and privacy measures are in place directly by us.
Vad händer exakt efter beställningen?
You will receive a confirmation e-mail, including all items ordered.
Also, our support team receives one and the provisioning workflow is initiated.
A controller will be internally assigned to your specific order, in charge of personally assuring the picking, shipping, and dozens of details required to ensure the best experience for you.
Once the shipment process begins, you will start receiving notifications both by email and SMS on your mobile phone constantly updating about shipment status, which will be specially relevant in cross-border shipments, for yachts in transit, and to avoid many different issues than can occur during domestic and international shipments. Our delivery guarantee without issues exceeds 99,5%, greatly increasing the sector average, due to continuous supervision of the shipping agents and constant updates provided to our customers, ensuring both parties are acknowledged about each shipping process step.
You will be also able to access order status and shipping details directly from the "My Account" section.
Får jag en faktura för min beställning?
Självklart!
I ditt bekräftelsemejl hittar du sannolikt en utskrivbar ordersammanställning.
När produkten har skickats skickar vi den tillhörande fakturan till dig.
Den kommer även att finnas tillgänglig i avsnittet "Mitt konto" när produkten har skickats.
Om du är ett företag med avdragsrätt för moms kan du ange dina momsuppgifter i kassan.
Kan jag returnera produkterna jag har köpt?
Självklart!
För privatpersoner garanterar lagen 14 dagars returrätt avseende dina beställningar.
Läs Allmänna villkor för specifika krav och bästa förfarande för att returnera produkter som ingår i din beställning.
Var finns ni?
Vår backoffice-verksamhet är centraliserad i Spanien (vi är belägna nära Valencia och Mallorca, ledande seglingscenter i Medelhavet och i världen).
På grund av våra farvattens internationella karaktär är vi vana vid att hantera behoven hos MÅNGA internationella kunder, vars flotta kan finnas på Mallorca, i Grekland, Turkiet, Sydafrika, Australien eller Karibien.
Vår fakturerings- och backoffice-adress är:
SailRACE - INTEALIS
Paseo de la Castellana, 179, pl. 1, of. C-1
28046 - Madrid (SPANIEN)
Spanien
Vår logistikadress för returer är:
SailRACE - INTEALIS
Gran Via Tarrega Monteblanco, 98
12006 - Castellon
Spanien
EU-momsregistreringsnummer: ES B87438123