Harken
مفتاح هاركن عن بُعد مع واقي
- السعر العادي
- Dhs. 635.00
- السعر المخفّض
- Dhs. 635.00
- السعر العادي
- Dhs. 713.00
SKU:HKN-BRS102/P
ضمان كامل
اشترِ بثقة.
يبيع SailRACE.com فقط منتجات جديدة مع ضمان رسمي كامل من الشركة المصنعة.
إذا كانت لديك أي مشكلات بعد الشراء، يُرجى التواصل معنا على team@sailrace.com لنحدد مع الشركة المصنعة أفضل حل.
Couldn't load pickup availability
الوصف
Overview
Harken® offers waterproof switches for electric and hydraulic systems to operate winches, furlers, and windlasses. These simple waterproof switches operate by finger or foot. A safety cover prevents accidental activation. Available in black composite or stainless steel.
Specifications
| Specification | Value |
|---|---|
| Height (in) | 13/16 in |
| Height (mm) | 21 mm |
| Length (in) | 2 11/16 in |
| Length (mm) | 68 mm |
| Weight (g) | 135 g |
| Weight (oz) | 4.8 oz |
| Ø (in) | 2 11/16 in |
| Ø (mm) | 68 mm |
FAQs
What types of screws are required for deck installation?
Use 3 x Ø4mm flat countersunk self-tapping stainless steel A4 DIN 7982 or ISO 7050 screws for deck mounting.
How should I seal the switch installation for water protection?
Apply sealant only in deck-drilled holes, not in the areas between the silicone covering the button's actuator.
Are there cleaning steps for preparing the mounting surface?
Yes, degrease with isopropyl alcohol and let it fully dry before installation.
How do you prepare the installation surface before mounting?
Remove drilling residues, clean, and degrease the surface with isopropyl alcohol. Ensure it is fully dry (about 2-3 min).
Are there key safety warnings regarding installation?
Do not modify the device or use non-original components, as this may invalidate the warranty and compromise safety.
Should a sealant be used during installation?
Yes, apply sealant to the drilled holes on the deck, but not between the silicone areas covering the electric actuator.
What must be checked before closing the switch during installation?
Check that cables are well laid inside the compartment and have not been deformed.
Which surfaces are suitable for mounting this switch?
Install the switch on a flat surface for optimal operation and safety.
Is fuse protection required, and what size?
Install a fuse when connecting any device. Use a 5A fuse for Harken Electric Winches as per user manual advice.
Is sealant required when mounting the switch?
Sealant must be applied to the holes, but not where silicone covers the actuator.
What care is needed for installation on teak decks?
It is advisable not to install the button between two wooden lists, but keep holes on the same list.
Can the switch be mounted on a curved surface?
No, the button must be installed on a flat surface.
What is the correct procedure for securing the installed switch?
Tighten all screws fully with vertical alignment and proper torque until fully fastened.
Are screws of any material acceptable for mounting?
No, only stainless steel A4 screws are recommended to resist loads and corrosion.
Can the BRS102 be installed on any surface orientation?
The button must be installed on a flat surface for proper function and sealing.
Are specific tools required for drilling the mounting holes?
Use a suitable tool to drill the holes as indicated on the mounting template, avoiding damage to the deck edge.
Can I use non-original Harken parts or modify the switch?
Never replace parts with non-original components or modify the device, as this voids the warranty and may cause malfunctions.
What cable size range is suitable for wiring this switch?
Use cables sized between 0.34 – 1.5mm2 (AWG: 22-16) as specified for the BRS102 switch.
How do I ensure proper wiring through the cable gland?
After routing and connecting the cables, ensure they are not deformed and that the gland is watertight before closing the cover.
What type of screws should be used for mounting the BRS102?
Use 3 x Ø4mm flat countersunk self-tapping screws of A4 stainless steel DIN 7982 or ISO 7050.
Should the cable gland be tightened after wiring?
Tighten the cable gland so the seal of its gasket is watertight after cabling.
Can I operate the switch by hand or foot?
The switch is designed for both hand and foot operation, with instructions for each method in the manual.
What precautions should be taken before use?
Check correct device operation and verify switch button integrity before each use.
What is the maximum voltage rating for the Harken BRS102 switch?
The maximum rated voltage for the Harken BRS102 switch is 24V DC.
What is the maximum current rating for the Harken BRS102 switch?
The Harken BRS102 switch supports a maximum current of 6A.
What ingress protection (IP) rating does the switch achieve?
The switch achieves an IP65 rating when using sheathed cables.
What is the operating temperature range for the BRS102 switch?
Permitted operating temperature range is -25°C to +70°C.
Is the device protected from environmental ingress?
Yes, the electronics are isolated by a silicone membrane for environmental protection.
Who do I contact for help with installation, servicing or advice?
Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase.
الأسئلة الشائعة
نحن هنا لمساعدة البحارة مثلك.
إذا لم تجد إجابة عن أسئلتك المحددة، فلا تتردد في الاتصال بنا.
هل يمكنني طلب فاتورة أولية بدلًا من الشراء عبر الإنترنت؟
بالنسبة للشركات التي تتبع إجراءات شراء داخلية أو للأفراد الذين يشعرون براحة أكبر عند الشراء عبر إجراءات تقليدية "غير متصلة"، يمكن لعملائنا دائمًا طلب فاتورة proforma تُفصِّل العناصر التي تهتم بها وكمياتها، وبشكل اختياري تقديم عنوان الفوترة وعنوان الشحن ورقم هاتف للحصول على تقدير شحن أدق وتسليم أسرع بمجرد إتمام الشراء.
إذا كنت مهتمًا بالحصول على فاتورة أولية، يرجى استخدام النموذج التالي.
ما هي طرق الدفع المقبولة في المتجر الإلكتروني؟
نقبل بطاقات الائتمان وبطاقات الخصم وPayPal وكذلك Apple Pay.
يمكنك أيضًا الدفع عن طريق التحويل البنكي، باختيار طريقة الدفع هذه عند الخروج. بمجرد تقديم الطلب دون دفع المال، سنزوّدك في الشاشة التالية بمعلومات البنك المطلوبة لإجراء التحويل.
لا تتردد في تواصل معنا إذا أردت إجراء تحويل بنكي.
كم يستغرق التسليم؟
نستخدم فقط شركات توصيل من الدرجة الأولى، مثل UPS وDHL. يتوفر خيار "التوصيل السريع" للعديد من وجهات الشحن.
لا ينبغي أن يستغرق الأمر أكثر من 2-4 أيام للوصول إلى أي موقع أوروبي، و3-6 أيام إلى أي موقع داخل الولايات المتحدة، و3-7 أيام في جميع أنحاء العالم.
بعد تقديم طلبك، يمكنك متابعة الشحن في قسم "حسابي"، مع معلومات تفصيلية عن حالة الطرد.
سنخطرك أيضًا عبر البريد الإلكتروني أو الرسائل النصية القصيرة بشكل مستمر عن كل نشاط شحن.
لا تتردد في الاتصال بنا إذا كنت تريد شحن المنتجات باستخدام الناقل الخاص بك.
ما مدى أمان التسوق في المتجر الإلكتروني؟ هل بياناتي محمية؟
لقد تعرّضت وكالة NSA، التي تملك أكبر ميزانية للأمن السيبراني في العالم، للاختراق مؤخرًا، كما قد تعلم من الصحافة. لذلك لا يمكن لأي شخص أن يضمن أي شيء في الأمن السيبراني بنسبة 100%.
مع ذلك، نحن نهتم كثيرًا بالخصوصية والأمن وقد نفّذنا ونشرنا العديد من التقنيات المتقدمة لحماية معلوماتك (نعتذر عن المصطلحات التقنية..):
- تُدار تحديثات منصتنا تلقائيًا بواسطة Shopify، الشركة الرائدة عالميًا في التجارة الإلكترونية. اطلع على أحدث تقارير الامتثال الخاصة بـ Shopify.
- نظامنا محمي على مستوى DNS بواسطة CloudFlare، مزود خدمات DNS وأمن الإنترنت الرائد، من هجمات DDoS والهجمات man-in-the-middle والعديد من الهجمات الأخرى. انظر معلومات مفصلة هنا.
- توجد إجراءات أمان وخصوصية تكميلية نطبقها نحن مباشرة.
ما الذي يحدث بالضبط بعد تقديم الطلب؟
ستتلقى رسالة تأكيد بالبريد الإلكتروني، تتضمن جميع العناصر التي تم طلبها.
كما سيستلم فريق الدعم لدينا نسخة منها، وسيبدأ سير عمل التجهيز.
سيتم تعيين مسؤول داخليًا لطلبك المحدد، يتولى شخصيًا التأكد من الالتقاط والتعبئة والشحن، وعشرات التفاصيل المطلوبة لضمان أفضل تجربة لك.
بمجرد بدء عملية الشحن، ستبدأ في تلقي إشعارات عبر البريد الإلكتروني ورسائل SMS على هاتفك المحمول بشكل مستمر، مع تحديثات عن حالة الشحنة، وهو أمر بالغ الأهمية خصوصًا في الشحنات عبر الحدود، ولليخوت أثناء العبور، ولتجنب العديد من المشكلات المختلفة التي قد تحدث أثناء الشحنات المحلية والدولية. إن ضماننا للتسليم من دون مشاكل يتجاوز 99,5%، متجاوزًا متوسط القطاع بشكل كبير، بفضل الإشراف المستمر على وكلاء الشحن والتحديثات الدائمة المقدمة لعملائنا، بما يضمن إطلاع كلا الطرفين على كل خطوة من خطوات عملية الشحن.
كما ستتمكن أيضًا من الاطلاع على حالة الطلب وتفاصيل الشحن مباشرةً من قسم "حسابي".
هل أستلم فاتورة لطلبي؟
بالتأكيد!
في رسالة التأكيد عبر البريد الإلكتروني من المرجح أن تجد بيان طلب قابل للطباعة.
عند شحن المنتج سنرسل لك الفاتورة المرافقة.
ستتوفّر أيضاً في القسم "حسابي" بمجرد الشحن.
إذا كنت شركة مؤهلة لخصم ضريبة القيمة المضافة، فستتمكن من إدخال بيانات ضريبة القيمة المضافة عند الدفع.
هل يمكنني إرجاع المنتجات التي اشتريتها؟
بالتأكيد نعم!
بالنسبة للأفراد، يضمن القانون سياسة إرجاع لمدة 14 days بخصوص طلباتك.
يرجى قراءة الشروط والأحكام للاطلاع على المتطلبات الخاصة وأفضل إجراء لإعادة المنتجات المدرجة في طلبك.
أين تقعون؟
تتمركز عمليات المكتب الخلفي لدينا في إسبانيا (نحن قريبون من فالنسيا ومايوركا، وهما من أبرز مراكز الإبحار في البحر المتوسط وفي العالم).
نظرًا للطابع الدولي لمياهنا، فنحن معتادون على تلبية احتياجات العديد من العملاء الدوليين، الذين قد تكون أساطيلهم في مايوركا أو اليونان أو تركيا أو جنوب إفريقيا أو أستراليا أو الكاريبي.
عنوان الفوترة والمكتب الخلفي لدينا هو:
SailRACE - INTEALIS
Paseo de la Castellana, 179, pl. 1, of. C-1
28046 - Madrid (SPAIN)
Spain
عنوان اللوجستيات الخاص بالإرجاع هو:
SailRACE - INTEALIS
Gran Via Tarrega Monteblanco, 98
12006 - Castellon
Spain
رقم VAT الأوروبي: ES B87438123