Tylaska
Tylaska K1000 Boomkicker with Fittings (27-30 ft Boats)
- Regular price
- €497,49
- Sale price
- €497,49
- Regular price
- €552,76
B2B και Έκπτωση ΦΠΑ
Αν είστε επιχείρηση που αφαιρεί ΦΠΑ στην Ευρωπαϊκή Ένωση, εγγραφείτε εδώ και εισαγάγετε το ΑΦΜ σας πριν την αγορά για να αφαιρεθεί κατά το checkout.
Αν είστε επαγγελματίας στον ναυτιλιακό τομέα και θέλετε να διερευνήσετε μια συνεργασία, επικοινωνήστε μαζί μας.
SKU:TYBK-K1000
Couldn't load pickup availability
Περιγραφή
Features:
- Robust fiberglass and aluminum construction
- Suggested Boat Size – 27-30 ft
- Initial Pin to Pin – 45 in
- Maximum Pin to Pin – 40 in
- Maximum Force (1) – 400 lb
- Stroke –
- Initial (2) – 15 in
- Min (3) – 6 in
Specifications:
The Boomkicker uses two coated solid fiberglass spring rods to provide the force necessary to support the boom and mainsail. The rods are clamped into teflon coated, anodized aluminum end pieces and attached to universal mast and boom fittings. Fittings are included along with machine screw fasteners, the proper drill and tap and hex wrench. The mast fitting includes a round slide which, used in the luff groove, avoids drilling into the mast. Flat slides in varying widths are available from the factory. The slides can often be inserted at the sail opening above the gooseneck and slid down reassembling the fitting in position. If slides are not usable, the fitting can be attached directly to the mast using the same drill and tap provided for the boom. The custom extruded boom track is contoured to fit both round and flat bottom booms. The track has an adjustable clevis pin to set the maximum height the Boomkicker will lift the boom. The track length forward of the pin allows the boom to move higher if needed.
Installation Instructions – Boomkicker® Model K1000
Important Note: To avoid undue stress on the boom fitting, it’s recommended that booms be fixed in the upright position. If the boom can roll about its’ central axis, please refer to Roll Stop Fitting Instructions
Recommended Installation Tools: Phillips Screwdriver; Fine Tooth Hacksaw; Center Punch; Rule; Variable Speed Reversible Drill and Blue Locktite.
| 1. Setup Boom Height: Use the main halyard to support the boom above its highest operating position, or a desired height when moored or docked. At this time, check that the Model K1000 is correct. The min. length is 40″ (102cm) pin to pin and the max. weight it can support is approximately 34 lbs. (15kg) measured at the outboard end of the boom with the main sail flaked as stored. 2. Position Boomkicker: The Boomkicker works by flexing upward and when straight, it is at the top of its travel. Install the Boomkicker with the screw head side of rod clamps facing up to flex upward away from the vang. With the boom height set, position the Boomkicker with fittings alongside the vang triangle to see how it fits. Position is not critical so long as it does not interfere with the vang. It’s recommended that both the vang and the Boomkicker make an angle of between 30o and 45o with the boom. Mark the location for the mast fitting. |
![]() |
| 3. Install Mast Fitting: The mast fitting comes with a luff grove slide to avoid drilling the mast. Different diameters and flat slides are available on the website or by phone. See part list. If usable, after disassembly from the fitting, the slide can often be inserted at the mast opening for the sail and dropped or lowered with a string. If the mast is out of the boat, the slide may be inserted from the base of the mast. Reassemble the mast fitting at the desired location and tighten the screws. If the slide is unusable, the bracket may be screwed directly to the mast. Extra long screws are available if needed to pass through the groove. Use the #7 drill and the 1/4-20 tap provided, with the mast fitting bracket as a guide. Locktite is recommended on threads. | ![]() |
| 4. Shorten if Necessary: If the Boomkicker is too long, we recommend shortening the rods at the mast end so any cut ends are less visible. Loosen the rod clamp with the provided hex-key and slide the extension up the rods until there is a good fit. The bottom half of the clamp fittings for each extension have embossed stops to prevent slipping. Do not shorten total length more than 5″ (12.5cm). Cut off extra rod length equally from both rods with a fine tooth hacksaw. Before tightening the clamps, check the rod ends are against the embossed stops and the clamps/extensions are not twisted relative to each other. | ![]() |
| 5. Install Boom Fitting: Make sure the rod clamps at both ends are tight. Then attach the Boomkicker to the mast fitting, and the slide and track at the boom end. The angle on the track goes forward, the stop in aft. There are 3 standard choices for the stop with the initial position in the middle for later adjustment if needed. If necessary more stop positions can be drilled using the inscribed line along the side of the track for the 3/16″ diameter pin. With the Boomkicker in position and slid back against the stop pin, and with the track centered under the boom, mark one hole. Then center punch, drill and tap. Attach the track, recheck position, then drill and tap the remaining holes using the track as a guide. Use Locktite on threads. Hint: Once installed, to attach the Boomkicker, it’s usually easier to slide the Boomkicker into the boom track first, then attach it to the mast fitting, rather then attaching to the mast first. 6. Check Return Force: After installation, check return force by pushing down on the end of the boom. The amount of support desired is a personal preference. For reference, with the sail flaked, using about 10 to 12 lbs.(4.5 to 5.4 kgs) to pull the aft end of the boom down seems like a good balance between boom support versus tension required to pull on the vang. More support may be desired with a bimini or if crew use the boom for support with the sail down. Less support may be desired if the mainsail is not stored on the boom or the Boomkicker is used to just lift the boom in light air for sail shape. If less or more force is needed, optional spring rods are available on our website. The purpose of the Boomkicker is to support the boom so the boom topping lift can be eliminated along with the chafe, windage, hangups and adjustments. If needed in unique circumstances, such as motoring in waves with the mainsail down, the main halyard can be attached to the aft end of the boom and tightened for further support. 7. Boomkicker orientation: The Boomkicker produces the same force flexing up or down. Flexing down may provide a better view of instruments on the back of the mast. If necessary as rods flex down, vang lines can run between them. To flex down have rod clamp screw heads, facing down. Leave fittings swivel and slider orientation as is. |
![]() |
Πλήρης Εγγύηση
Αγοράστε με σιγουριά.
Το SailRACE.com πωλεί μόνο καινούργια προϊόντα με πλήρη επίσημη εγγύηση κατασκευαστή.
Αν αντιμετωπίσετε οποιοδήποτε πρόβλημα μετά την αγορά, παρακαλούμε επικοινωνήστε μαζί μας στο team@sailrace.com ώστε να καθορίσουμε μαζί με τον κατασκευαστή την καλύτερη λύση.
Συχνές Ερωτήσεις
Είμαστε εδώ για να βοηθήσουμε ιστιοπλόους σαν εσάς.
Αν δεν βρείτε απάντηση στις συγκεκριμένες ερωτήσεις σας, μη διστάσετε να επικοινωνήσετε μαζί μας.
Μπορώ να ζητήσω προτιμολόγιο αντί να αγοράσω online;
Για εταιρείες που ακολουθούν εσωτερικές διαδικασίες αγορών ή για ιδιώτες που νιώθουν πιο άνετα να αγοράζουν ακολουθώντας παραδοσιακές, "offline" διαδικασίες, οι πελάτες μας μπορούν πάντα να ζητήσουν ένα προτιμολόγιο, με λεπτομέρειες για τα είδη που σας ενδιαφέρουν, τις ποσότητές τους και, προαιρετικά, παρέχοντας τη διεύθυνση χρέωσης και αποστολής, καθώς και έναν αριθμό τηλεφώνου, για καλύτερη εκτίμηση των μεταφορικών και ταχύτερη παράδοση μόλις ολοκληρωθεί η αγορά.
Αν ενδιαφέρεστε για προτιμολόγιο, παρακαλούμε χρησιμοποιήστε την ακόλουθη φόρμα.
Ποιες μέθοδοι πληρωμής γίνονται δεκτές στο Ηλεκτρονικό Κατάστημα;
Δεχόμαστε πιστωτικές και χρεωστικές κάρτες, PayPal και επίσης Apple Pay.
Μπορείτε επίσης να πληρώσετε με τραπεζική μεταφορά, επιλέγοντας αυτή τη μέθοδο πληρωμής κατά το checkout. Μόλις η παραγγελία υποβληθεί χωρίς πληρωμή, στην επόμενη οθόνη θα σας δώσουμε τα τραπεζικά στοιχεία που απαιτούνται για τη μεταφορά.
Μη διστάσετε να επικοινωνήσετε μαζί μας αν θέλετε να κάνετε τραπεζική μεταφορά.
Πόσος χρόνος θα χρειαστεί για την παράδοση;
Χρησιμοποιούμε μόνο μεταφορείς πρώτης κατηγορίας, όπως UPS και DHL. Υπάρχει διαθέσιμη επιλογή "Express Delivery" για πολλούς προορισμούς αποστολής.
Δεν θα πρέπει να χρειαστούν περισσότερες από 2-4 ημέρες για οποιονδήποτε ευρωπαϊκό προορισμό, 3-6 ημέρες για οποιονδήποτε προορισμό στις ΗΠΑ και 3-7 ημέρες παγκοσμίως.
Αφού υποβάλετε την παραγγελία σας, μπορείτε να παρακολουθείτε την αποστολή στην ενότητα "My Account", με αναλυτικές πληροφορίες για την κατάσταση του δέματος.
Θα σας ειδοποιούμε επίσης με email ή SMS συνεχώς για κάθε δραστηριότητα αποστολής.
Μη διστάσετε να επικοινωνήσετε μαζί μας αν θέλετε τα προϊόντα να αποσταλούν με τον δικό σας μεταφορέα.
Πόσο ασφαλείς είναι οι αγορές στο Ηλεκτρονικό Κατάστημα; Προστατεύονται τα δεδομένα μου;
Η NSA, με τον μεγαλύτερο προϋπολογισμό κυβερνοασφάλειας στον κόσμο, έχει δεχθεί πρόσφατα παραβίαση, όπως ίσως γνωρίζετε από τον Τύπο. Άρα κανείς δεν μπορεί να εγγυηθεί 100% οτιδήποτε αφορά την κυβερνοασφάλεια.
Τούτου λεχθέντος, είμαστε ιδιαίτερα ευαισθητοποιημένοι σε θέματα απορρήτου και ασφάλειας και έχουμε υλοποιήσει και αναπτύξει πολλές προηγμένες τεχνολογίες για να διατηρούμε τις πληροφορίες σας προστατευμένες (συγγνώμη για τους τεχνικούς όρους ...):
- Οι ενημερώσεις της πλατφόρμας μας διαχειρίζονται αυτόματα από τη Shopify, τον παγκόσμιο ηγέτη στο e-commerce. Δείτε τις τελευταίες αναφορές συμμόρφωσης της Shopify.
- Το σύστημά μας προστατεύεται σε επίπεδο DNS από τη CloudFlare, τον κορυφαίο πάροχο DNS και ασφάλειας Internet, από επιθέσεις DDoS, man-in-the-middle και πολλές άλλες επιθέσεις. Δείτε λεπτομερείς πληροφορίες εδώ.
- Συμπληρωματικά μέτρα ασφάλειας και απορρήτου εφαρμόζονται απευθείας από εμάς.
Τι ακριβώς συμβαίνει μετά την παραγγελία;
Θα λάβετε ένα e-mail επιβεβαίωσης, που θα περιλαμβάνει όλα τα παραγγελθέντα είδη.
Επίσης, η ομάδα υποστήριξής μας θα λάβει ένα και θα ξεκινήσει η ροή εργασίας προετοιμασίας.
Θα ανατεθεί εσωτερικά ένας υπεύθυνος στη συγκεκριμένη παραγγελία σας, ο οποίος θα είναι αρμόδιος να διασφαλίσει προσωπικά τη συλλογή, την αποστολή και δεκάδες λεπτομέρειες που απαιτούνται για να εξασφαλιστεί η καλύτερη εμπειρία για εσάς.
Μόλις ξεκινήσει η διαδικασία αποστολής, θα αρχίσετε να λαμβάνετε ειδοποιήσεις τόσο μέσω email όσο και μέσω SMS στο κινητό σας τηλέφωνο, με συνεχή ενημέρωση για την κατάσταση της αποστολής, κάτι που θα είναι ιδιαίτερα σημαντικό σε διασυνοριακές αποστολές, για γιοτ σε διαμετακόμιση, και για την αποφυγή πολλών διαφορετικών ζητημάτων που μπορεί να προκύψουν κατά τις εσωτερικές και διεθνείς αποστολές. Η εγγύηση παράδοσής μας χωρίς προβλήματα υπερβαίνει το 99,5%, αυξάνοντας σημαντικά τον μέσο όρο του κλάδου, λόγω της συνεχούς επίβλεψης των μεταφορικών πρακτόρων και των διαρκών ενημερώσεων που παρέχονται στους πελάτες μας, διασφαλίζοντας ότι και τα δύο μέρη ενημερώνονται για κάθε βήμα της διαδικασίας αποστολής.
Θα μπορείτε επίσης να έχετε πρόσβαση στην κατάσταση της παραγγελίας και στις λεπτομέρειες αποστολής απευθείας από την ενότητα "Ο Λογαριασμός μου".
Θα λάβω τιμολόγιο για την παραγγελία μου;
Φυσικά ναι!
Στο e-mail επιβεβαίωσης πιθανότατα θα βρείτε ένα εκτυπώσιμο δελτίο παραγγελίας.
Όταν το προϊόν αποσταλεί, θα σας στείλουμε το αντίστοιχο τιμολόγιο.
Θα το έχετε επίσης διαθέσιμο στην ενότητα "Ο Λογαριασμός μου" μόλις αποσταλεί.
Εάν είστε εταιρεία με δικαίωμα έκπτωσης ΦΠΑ, θα μπορείτε να καταχωρίσετε τα στοιχεία ΦΠΑ σας στο checkout.
Μπορώ να επιστρέψω τα προϊόντα που έχω αγοράσει;
Φυσικά ναι!
Για ιδιώτες, ο νόμος εγγυάται δικαίωμα υπαναχώρησης 14 ημερών για τις παραγγελίες σας.
Παρακαλούμε, διαβάστε τους Όρους και Προϋποθέσεις για τις συγκεκριμένες απαιτήσεις και την καλύτερη διαδικασία επιστροφής των προϊόντων που περιλαμβάνονται στην παραγγελία σας.
Πού βρίσκεστε;
Οι εργασίες backoffice μας είναι συγκεντρωμένες στην Ισπανία (βρισκόμαστε κοντά στη Βαλένθια και τη Μαγιόρκα, κορυφαία μεσογειακά και παγκόσμια κέντρα ιστιοπλοΐας).
Λόγω της διεθνούς φύσης των θαλασσών μας, είμαστε συνηθισμένοι να διαχειριζόμαστε τις ανάγκες ΠΟΛΛΩΝ διεθνών πελατών, των οποίων ο στόλος μπορεί να βρίσκεται στη Μαγιόρκα, την Ελλάδα, την Τουρκία, τη Νότια Αφρική, την Αυστραλία ή την Καραϊβική.
Η διεύθυνση τιμολόγησης και backoffice μας είναι:
SailRACE - INTEALIS
Paseo de la Castellana, 179, pl. 1, of. C-1
28046 - Madrid (SPAIN)
Spain
Η διεύθυνση logistics για επιστροφές είναι:
SailRACE - INTEALIS
Gran Via Tarrega Monteblanco, 98
12006 - Castellon
Spain
ΑΦΜ ΕΕ: ES B87438123



