Tylaska
Tylaska K2000 Boomkicker with Fittings (38-42 ft Boats)
- Regular price
- ¥117,800
- Sale price
- ¥117,800
- Regular price
- ¥132,400
B2Bおよび付加価値税控除
欧州連合内で付加価値税（VAT）を控除する事業者の方は、購入前に こちらから登録 し、VAT IDを入力すると、購入手続き時に控除を受けられます。
海事分野の専門家の方で、提携の可能性を検討されたい場合は、 お問い合わせください。
SKU:TYBK-K2000
Couldn't load pickup availability
商品説明
Features:
- Robust fiberglass and aluminum construction
- Suggested Boat Size – 38-42 ft
- Initial Pin to Pin – 64 in
- Minimum Pin to Pin – 59 in
- Maximum Force (1) – 600 lb
- Stroke –
- Initial (2) – 16 in
- Min (3) – 9 in
Specifications:
Boomkickers use two coated solid fiberglass spring rods to provide the force necessary to support the boom and mainsail. The rods are clamped into teflon coated, anodized aluminum end pieces and attached to universal mast and boom fittings. Fittings are included along with machine screw fasteners, the proper drill and tap and hex wrench. The mast fitting includes a round slide which, used in the luff groove, avoids drilling into the mast. Flat slides in varying widths are available from the factory. The slides can often be inserted at the sail opening above the gooseneck and slid down reassembling the fitting in position. If slides are not usable, the fitting can be attached directly to the mast using the same drill and tap provided for the boom. The custom extruded boom track is contoured to fit both round and flat bottom booms. The track has an adjustable clevis pin to set the maximum height the Boomkicker will lift the boom. The track length forward of the pin allows the boom to move higher if needed.
Installation Instructions – Boomkicker® Model K2000
Important Note: To avoid undue stress on the boom fitting, it’s recommended that booms be fixed in the upright position. If the boom can roll about its central axis, please refer to Roll Stop Fitting Instructions (part no. BK-M1551) https://tylaska.com/product/boom-roll-stop-fitting/
Recommended Installation Tools: Phillips Screwdriver; Fine Tooth Hacksaw; Center Punch; Rule; Variable Speed Reversible Drill and Blue Locktite.
| 1. Setup Boom Height: Use the main halyard to support the boom above its highest operating position, or a desired height when moored or docked. At this time, check that the Model K2000 is correct. The min. length is 59″ (122cm) pin to pin and the max. weight it can support is approximately 58 lbs. (26kg) measured at the outboard end of the boom with the main sail flaked as stored. 2. Position Boomkicker: The Boomkicker works by flexing. When straight, it is at the top of its travel. Install the Boomkicker with the screw head side of rod clamps facing upward to flex upwards away from the vang. With the boom height set, position the Boomkicker with fittings alongside the vang triangle to see how it fits. Position is not critical so long as it does not interfere with the vang. It is recommended that both the vang and the Boomkicker make an angle of between 30o and 45o with the boom. |
 |
| 3. Install Mast Fitting: The mast fitting comes with a luff grove slide to avoid drilling the mast. Different diameters and flat slides are available on our website. If usable, after disassembly from the fitting, the slide can often be inserted at the mast opening for the sail and dropped or lowered with a string. If the mast is out of the boat, the slide may be inserted from the base of the mast. Reassemble the mast fitting at the desired location and tighten the screws. If the slide is unusable, the bracket may be screwed directly to the mast. Extra long screws are available if needed to pass through the groove. Use the 1/4″ drill and the 5/16-18 tap provided, with the mast fitting bracket as a guide. Blue Locktite is recommended on threads. |  |
| 4. Shorten if Necessary: If the Boomkicker is too long, we recommend shortening the rods at the mast end so any cut ends are less visible. Loosen the rod clamp with the provided hex-key and slide the extension up the rods until there is a good fit. The bottom half of the clamp fittings for each extension have embossed stops to prevent slipping. Do not shorten total length more than 5″ (12.5cm). Cut off extra rod length equally from both rods with a fine tooth hacksaw. Before tightening the clamps, check that the rod ends are against the embossed stops and that the clamps/extensions are not twisted relative to each other. |  |
| 5. Install Boom Fitting: Make sure the rod clamps at both ends are tight. Then attach the Boomkicker to the mast fitting, and the slide and track at the boom end. The angle on the track goes forward, the stop in aft. There are 3 standard choices for the stop with the initial position in the middle for later adjustment if needed. If necessary more stop positions can be drilled using the inscribed line along the side of the track for the 3/16″ diameter pin. With the Boomkicker in position and slid back against the stop pin, and with the track centered under the boom, mark one hole. Then center punch, drill and tap. Attach the track, recheck position, then drill and tap the remaining holes using the track as a guide. Use blue Locktite on threads. Hint: Once installed, to attach the Boomkicker, it’s usually easier to slide the Boomkicker into the boom track first, then attach it to the mast fitting, rather then attaching to the mast first. 6. Check Return Force: After installation, check return force by pushing down on the end of the boom. The amount of support desired is a personal preference. For reference, with the sail flaked, using about 10 to 12 lbs.(4.5 to 5.4 kgs) to pull the aft end of the boom down seems like a good balance between boom support versus tension required to pull on the vang. More support may be desired with a bimini or if crew use the boom for support with the sail down. Less support may be desired if the mainsail is not stored on the boom or the Boomkicker is used to just lift the boom in light air for sail shape. If less or more force is needed, optional spring rods are available on our website. The purpose of the Boomkicker is to support the boom so the boom topping lift can be eliminated along with the chafe, windage, hangups and adjustments. If needed in unique circumstances, such as motoring in waves with the mainsail down, the main halyard can be attached to the aft end of the boom and tightened for further support. 7. Boomkicker orientation: The Boomkicker produces the same force flexing up or down. Flexing down may provide a better view of instruments on the back of the mast. If its is necessary for the rods flex down, vang lines can run between them. To flex down have rod clamp screw heads, facing down. |
 |
完全保証
安心してお買い求めください。
SailRACE.comでは、新品のみを、メーカー公式の完全保証付きで販売しています。
ご購入後に問題がございましたら、メーカーとともに最適な解決策を判断するため、team@sailrace.comまでお問い合わせください。
よくある質問
セーラーの皆様のお手伝いをするためにここにいます。
ご質問に対する具体的な回答が見つからない場合は、どうぞお気軽に お問い合わせください。
オンラインで購入する代わりに、プロフォーマインボイス（仮請求書）を依頼できますか？
社内の購買手続きに従う企業のお客様、または従来の「オフライン」手続きに従って購入する方が安心だと感じる個人のお客様は、ご希望商品の詳細と数量を記載した仮請求書をいつでもご依頼いただけます。任意で請求先住所、配送先住所、電話番号をご提供いただくと、配送料の見積もり精度が高まり、ご購入後の配送を最短で手配できます。
仮請求書をご希望の場合は、 以下のフォームをご利用ください。
オンラインショップではどの支払い方法を利用できますか？
クレジットカードおよびデビットカード、PayPal、Apple Payをご利用いただけます。
銀行振込でもお支払いいただけます。ご購入手続き時にこのお支払い方法を選択してください。お支払いを行わずにご注文が完了すると、次の画面で振込に必要な銀行口座情報をご案内します。
銀行振込をご希望の場合は、お気軽に お問い合わせ ください。
配送にはどのくらい時間がかかりますか？
We only use first-class delivery carriers, like UPS and DHL. There's an "Express Delivery" option for many shipping destinations available.
It should not take more than 2-4 days to any European location, 3-6 days to any USA-based location, and 3-7 days worldwide.
When you've placed your order, you can follow-up the shipping on the "My Account" section, with detail information about parcel status.
We will also notify you by email or SMS continously about each shipping activity.
Don't hesitate to contact us if you want products to be shipped using your own carrier.
オンラインショップでのお買い物はどの程度安全ですか？私のデータは保護されていますか？
The NSA, with the biggest cybersecurity budget in the world, has been hacked recently, as you might know from the press. So nobody can 100% ensure anything on cybersecurity.
That said, we are very privacy and security-conscious and have done and deployed many advanced technologies to keep your information protected (sorry for the techy terms ...):
- Our platform updates are automatically managed by Shopify, the global leader in e-commerce. Access the latest Shopify Compliance reports.
- Our system is protected at the DNS level by CloudFlare, the leading DNS and Internet Security provider, from DDoS attacks, man-in-the-middle and many other attacks. See detailed info here.
- Complementary security and privacy measures are in place directly by us.
ご注文後は具体的に何が起こりますか？
You will receive a confirmation e-mail, including all items ordered.
Also, our support team receives one and the provisioning workflow is initiated.
A controller will be internally assigned to your specific order, in charge of personally assuring the picking, shipping, and dozens of details required to ensure the best experience for you.
Once the shipment process begins, you will start receiving notifications both by email and SMS on your mobile phone constantly updating about shipment status, which will be specially relevant in cross-border shipments, for yachts in transit, and to avoid many different issues than can occur during domestic and international shipments. Our delivery guarantee without issues exceeds 99,5%, greatly increasing the sector average, due to continuous supervision of the shipping agents and constant updates provided to our customers, ensuring both parties are acknowledged about each shipping process step.
You will be also able to access order status and shipping details directly from the "My Account" section.
注文の請求書は受け取れますか？
もちろんです！
確認メールには、印刷可能なご注文明細書が含まれている可能性が高いです。
商品が発送されましたら、該当する請求書をお送りします。
発送後は、「マイアカウント」セクションでもご確認いただけます。
付加価値税（VAT）の控除対象となる会社の場合は、決済手続き時に付加価値税（VAT）情報をご入力いただけます。
購入した商品を返品できますか？
はい、もちろんです！
個人のお客様には、ご注文に関して、法律により14日間の返品期間が保証されています。
具体的な要件およびご注文に含まれる商品の返品に最適な手順については、 利用規約 をお読みください。
所在地はどこですか？
当社の事務管理業務はスペインに集約されています（当社は、地中海および世界有数のセーリング拠点であるバレンシアとマヨルカ島の近くに位置しています）。
当社が活動する海域は国際色が豊かなため、船隊がマヨルカ島、ギリシャ、トルコ、南アフリカ、オーストラリア、またはカリブ海にある、数多くの海外のお客様のニーズに対応することに慣れています。
当社の請求書発行および事務管理用住所は以下のとおりです:
SailRACE - INTEALIS
Paseo de la Castellana, 179, pl. 1, of. C-1
28046 - Madrid (SPAIN)
Spain
返品に関する当社の物流住所は以下のとおりです:
SailRACE - INTEALIS
Gran Via Tarrega Monteblanco, 98
12006 - Castellon
Spain
EU付加価値税登録番号: ES B87438123