LOCAL DELIVERY OPTIONS
Standard Delivery usually 3-7 days.Express Delivery usually 2-4 days.
PRICE GUARANTEE
If you find a cheaper price in the next 72 hours we will match it.
70,24 € Original price was: 70,24 €.61,11 €Current price is: 61,11 €.
You save
This plastic aft mirror mount transducer can be used to replace the dual-frequency transducers included with many Garmin units.
The 500 W transducer with 8 pins has a maximum depth of 1,500 ft (457 m); an operating frequency of 50 to 200 kHz; a beam of 40 to 10 degrees and is mounted at a stern mirror angle of between 0 and 70 degrees.
The transducer kit is supplied with the installation instructions. Follow the instructions carefully to avoid damage to the boat.
5 in stock
Standard Delivery usually 3-7 days.Express Delivery usually 2-4 days.
If you find a cheaper price in the next 72 hours we will match it.
Claim your initial 5% discount on your first order by registering on the SailRACE community.
Get support by officially certified experts. Detail us your refitting needs and we will help you determining the best solution.
This plastic aft mirror mount transducer can be used to replace the dual-frequency transducers included with many Garmin units.
The 500 W transducer with 8 pins has a maximum depth of 1,500 ft (457 m); an operating frequency of 50 to 200 kHz; a beam of 40 to 10 degrees and is mounted at a stern mirror angle of between 0 and 70 degrees.
The transducer kit is supplied with the installation instructions. Follow the instructions carefully to avoid damage to the boat.
Physical And Performance Characteristics | |
---|---|
FREQUENCY | 50/200 kHz |
ENERGY | 500 W |
BEAM WIDTH | 40°/10° |
MAXIMUM DEPTH | 1,500 ft. |
CABLE LENGTH | 30 ft. |
DEPTH/SPEED/TEMPERATURE | Depth and Temperature |
NUMBER OF SIDEBURNS | 8-pin |
AFT MIRROR ANGLES ALLOWED | 0°-70° degree transom |
Brand |
---|
The following products are from the same Category as this one:
Transducers
Garmin Transducer mounting through the bronze hull at 200/50 kHz B260 of 1 kW Airmar (8 lugs)
Garmin
Garmin
Dear Ermanno Giorgio,
Yes, it is compatible, but an adapter cable is needed since that transducer has 8 pins and the device has a 6-pin input.
Sorry, no questions were found
5 in stock
Reviews
There are no reviews yet