ALL IN ONE

Replace existing two-element systems (fuse box and switches) to facilitate the control and operation of on-board functions.

DIGITAL CONTROL

Control and protect up to 20 circuits from the plotter instead of using a button or a physical switch.

ON/OFF SWITCHES

The switching outputs control the bilge pump and the non-dimmable lights, such as navigation and courtesy lights.

MITIGATABLE DEPARTURES

The pulse sliders allow you to adjust the brightness on board to your liking.

MOMENTARY OUTINGS

Control the horns and much more. You just have to press and hold and release depending on the desired duration of the sound.

NURSERY TIMER

A built-in timer makes the pump recycle water to keep the fish alive and the pumps running for longer.

SUPERVISE THE DEPOSITS

Detects and calibrates the transmitter of up to four tanks, such as those of fuel, fresh water, gray water, black water and nursery.

ADDITIONAL TICKETS

Check the voltages of the internal and starting batteries, monitor the operation of the bilge pump and connect optional physical switches.

UPGRADE YOUR BOAT

Install the system on existing boats without special tools or configuration using cables with 18′′ conductors and color-coded channel cables.

Specifications:

Misc

General
Dimensions (An. x Al. x Pr.) (Only the unit)	9,1 x ″ x 4,2 mm (″1,5 x ″230 x 10638)
Weight (Only the unit)	14,1 g (400 oz)
Ambient temperature	From -20 °C to 55 °C
Classification of the water in the box	IP65
Communication	Red CAN-bus NMEA 2000®, LEN-0
Departures
High side	13 channels of 10 A, 7 channels of 5 A
Departures
Grounding switch input	15
Monitor of the bilde bomb	2
Analog input
Voltios	3 a 0-16 V +/-1 %
Resistance	2 a 0-1500 ohmios +/-5 %
Electric power
Maximum current	50 A
Power consumption off	60 mA
Supply voltage (12 V)	9-16 V CC
Connector
NMEA 2000®	Macro micro M12 de 5 pines
Channels	Molex MX150 L 16 Circuits
Power terminal	Perno M6