Harken 60mm Protexit™ Exit Block

When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too. Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates. Sheave Ø (mm) 60 mm
Sheave Ø (in) 2 3/8 in
Length (mm) 129 mm
Length (in) 5 1/16 in
Weight (g) 179 g
Weight (oz) 6.3 oz
Maximum line Ø (mm) 12 mm
Maximum line Ø (in) 1/2 in
Fasteners (mm) 6 FH mm
Fasteners (in) 1/4 FH in
Fastener spacing (mm) 105 mm
A (mm) 24.3 mm
B (mm) 84 mm
Maximum working load (kg) 1200 kg
Maximum working load (lb) 2640 lb
Breaking load (kg) 2400 kg
Breaking load (lb) 5292 lb

Brand	HARKEN
SKU	1204
GTIN	097653284666
Brand	Harken

The following products are from the same Category as this one: